Wireless Gas Detection Equipment For Monitoring And Testing Available In Romania
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Wireless MultiSet series is a microprocessor-based multipoint multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a 900 MHz or 2.4 GHz wireless network operating in a range of 1500-2000 ft., ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
All component parts are rated for Class 1; Division 1, Group C, D hazardous areas. These advanced field devices consist of a CXT low power gas detection sensor and wireless transceiver packaged in a single enclosure. Power is provided by a disposable “C” cell battery pack capable of continuous operation for greater than 60 days. Additional power options include a Smart ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Teledyne Gas and Flame Detection is proud to introduce its wireless system with the OLCT 80 field detector/transmitter. This new model allows wireless connectivity in ATEX 1 zones. The maximum range is 3km, line of sight. The type of network selected will depend on the number of field detectors, the area coverage and the network ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Command functions include alarm reset, alarm acknowledge, alarm test and radio silence. In normal operation the control panel provides real time display of gas concentrations or the status of other field devices; battery charge levels, network RF signal quality and any number of fault diagnostic conditions affecting either an individual field device or the entire network. These fault conditions ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Each system includes a tripod, network HMI, gas detection sensor(s), and alarm warning devices. An optional Sentinel SiteWatch provides remote access to system data via Ethernet or cellular communication. Power to the sensor assembly is supplied by a rechargeable Smart Battery Pack, disposable batteries or directly from HMI. Flexible and expandable, a Site Sentinel network can include up to 32 ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The hazardous location combination SW-AV1-DV2E alarm horn sounder & LED or 10J Xenon beacon/status warning light is UL/cULus/ULC approved for hazardous applications utilizing Detcon’s wireless ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WS GasPost Series toxic or combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and transmits this value to the control panel via a 900MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The SW-AV2-DV2E supplies two alarm lights with a sounder in a third party UL/cULus/ULc approved package. Utilizing Detcon’s wireless protocol allows use with Detcon’s family of wireless gas detection ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
technology for remote detection of gas leaks. The RMLD-CS (Remote Methane Leak Detector - Complete Solution) is a highly advanced technology, capable of detecting methane leaks from a remote distance. This technology makes it possible to detect leaks in areas that may be difficult to reach such as busy roadways, yards with dogs, fenced-off areas, bridge pipes and biogas ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The SmartWireless Site Sentinel CX sensor station is an accessory to any Detcon wireless RXT transceiver or wireless controller and is easily and economically deployable in both permanent and temporary installations. The CX wirelessly transmits the data from up to 4 wired gas detectors back to wireless controller and includes a battery that powers the radio, alarm devices, and the attached ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Model CX sensors are equipped with standard analog 4-20mA, and Modbus RTU RS-485 outputs and can be used with SmartWireless Site Sentinel CX/CXT controllers. The CX is a very low power device making it an ideal choice for a battery powered detector (optional) in applications where power is unavailable or not economically feasible. CX gas detection sensors are easily and economically deployable ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The BM25 packs the benefits of a fixed system area monitor into a rugged, user-friendly and transportable instrument. It was designed to detect one to five gases for mobile or temporary work applications, team protection, area surveillance or places where fixed detection systems are not suitable. Powered by a NiMH battery pack, the BM 25 multi gas monitor offers up to 170 hours of continuous run ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WR Series Remote Relay Module operates within a CEW wireless gas detection network, acting as an addressable output to the CEW Control Panel. Each WR Relay Module provides 8 relays for the indirect activation of fans, louvers, etc at programmable set points. Since the WR Relay Module operates without the need to be hardwired to the controller, it can be located at any point within the ...
-
Manufactured by Protek Safety & Controls Ltd.based in CANADA
Mimics Gas Sensor Display (when applicable). Optional Relay Contacts. Remote calibration of Gas Sensor. Remote configuration of gas detector parameters. Complete Diagnostic Information (varies by sensor attached). UDM-002 combination of detectors can be LEL/LEL, H2S/H2S, LEL/H2S, etc.. 4-20mA output signal pass through from gas detector. Certified for Zone 1 and the UDM Electronics are also ...
-
Manufactured by RC Systems, Inc.based in USA
The battery-powered SenSmart 7900 wireless gas detector, with ultra-low power design and easy to use features, provides the most advanced, economical and reliable true wireless toxic and combustible gas detection solution. The SenSmart 7000 is compatible with all RC System’s toxic sensors, including hydrogen sulfide, carbon dioxide, oxygen, hydrogen cyanide and many others. In addition, the ...
-
Manufactured by Sensit Technologiesbased in USA
GAS•TRAC LZ-50 is a compact, hand-held methane gas detector that uses laser light to detect and monitor fugitive methane gas emissions. Quickly and safely detect methane gas leaks at distances up to 150 feet. Easily access hard-to-reach locations, avoid obstacles and investigate gas hazards from a safe ...
-
Manufactured by Pem-Tech, Inc.based in USA
Model PT2008 Series is a multichannel gas monitor & controller that can interface up to 16 remote gas detectors & transmitters. The monitor is fully programmable for the sensor type and alarm levels using keypad on the front ...
-
Manufactured by Protek Safety & Controls Ltd.based in CANADA
Mimics Gas Sensor Display (when applicable). Remote calibration of Gas Sensor. Remote configuration of gas detector parameters. Complete Diagnostic Information (varies by sensor attached). UDM-002 combination of detectors can be LEL/LEL, H2S/H2S, LEL/H2S, etc.. 4-20mA output signal pass through from gas detector. Certified for Zone 1 and the UDM Electronics are also Certified for Zone 2 (no seals ...
-
Manufactured by Blackline Safety Corp.based in CANADA
Our new employee-worn Loner® M6 lone worker monitoring device was designed and manufactured by Blackline’s in-house product development team to monitor the safety of lone workers in the field, inside facilities, in between sites and while driving. Loner M6 features a combination of automatic and manually triggered safety features that initiate the emergency response ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you