Wireless Gas Detection Equipment For Monitoring And Testing Available In Arkansas
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The BM25 packs the benefits of a fixed system area monitor into a rugged, user-friendly and transportable instrument. It was designed to detect one to five gases for mobile or temporary work applications, team protection, area surveillance or places where fixed detection systems are not suitable. Powered by a NiMH battery pack, the BM 25 multi gas monitor offers up to 170 hours of continuous run ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Model CX sensors are equipped with standard analog 4-20mA, and Modbus RTU RS-485 outputs and can be used with SmartWireless Site Sentinel CX/CXT controllers. The CX is a very low power device making it an ideal choice for a battery powered detector (optional) in applications where power is unavailable or not economically feasible. CX gas detection sensors are easily and economically deployable ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WR Series Remote Relay Module operates within a CEW wireless gas detection network, acting as an addressable output to the CEW Control Panel. Each WR Relay Module provides 8 relays for the indirect activation of fans, louvers, etc at programmable set points. Since the WR Relay Module operates without the need to be hardwired to the controller, it can be located at any point within the ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Teledyne Gas and Flame Detection is proud to introduce its wireless system with the OLCT 80 field detector/transmitter. This new model allows wireless connectivity in ATEX 1 zones. The maximum range is 3km, line of sight. The type of network selected will depend on the number of field detectors, the area coverage and the network ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Each system includes a tripod, network HMI, gas detection sensor(s), and alarm warning devices. An optional Sentinel SiteWatch provides remote access to system data via Ethernet or cellular communication. Power to the sensor assembly is supplied by a rechargeable Smart Battery Pack, disposable batteries or directly from HMI. Flexible and expandable, a Site Sentinel network can include up to 32 ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The hazardous location combination SW-AV1-DV2E alarm horn sounder & LED or 10J Xenon beacon/status warning light is UL/cULus/ULC approved for hazardous applications utilizing Detcon’s wireless ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The SW-AV2-DV2E supplies two alarm lights with a sounder in a third party UL/cULus/ULc approved package. Utilizing Detcon’s wireless protocol allows use with Detcon’s family of wireless gas detection ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Command functions include alarm reset, alarm acknowledge, alarm test and radio silence. In normal operation the control panel provides real time display of gas concentrations or the status of other field devices; battery charge levels, network RF signal quality and any number of fault diagnostic conditions affecting either an individual field device or the entire network. These fault conditions ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Wireless MultiSet series is a microprocessor-based multipoint multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a 900 MHz or 2.4 GHz wireless network operating in a range of 1500-2000 ft., ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
All component parts are rated for Class 1; Division 1, Group C, D hazardous areas. These advanced field devices consist of a CXT low power gas detection sensor and wireless transceiver packaged in a single enclosure. Power is provided by a disposable “C” cell battery pack capable of continuous operation for greater than 60 days. Additional power options include a Smart ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
technology for remote detection of gas leaks. The RMLD-CS (Remote Methane Leak Detector - Complete Solution) is a highly advanced technology, capable of detecting methane leaks from a remote distance. This technology makes it possible to detect leaks in areas that may be difficult to reach such as busy roadways, yards with dogs, fenced-off areas, bridge pipes and biogas ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The SmartWireless Site Sentinel CX sensor station is an accessory to any Detcon wireless RXT transceiver or wireless controller and is easily and economically deployable in both permanent and temporary installations. The CX wirelessly transmits the data from up to 4 wired gas detectors back to wireless controller and includes a battery that powers the radio, alarm devices, and the attached ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WS GasPost Series toxic or combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and transmits this value to the control panel via a 900MHz or 2.4 GHz wireless ...
-
Manufactured by Boston Electronic Corporationbased in USA
Boston Electronics photodetectors span the spectrum from UV, Visible, to IR and THz, and are applied in a wide range of markets and applications including remote sensing, chemical and gas detection, disinfection and water purification, and scientific instrumentation to just name a few. Our on-line resources and application specialist will help you determine the most appropriate sensor for your ...
-
Manufactured by Sierra Monitor - Mine Safety Appliances Co (MSA)based in USA
Sierra Monitor’s infrared fixed gas sensor, the 5100-28-IT, monitors combustible gases such as Methane and Propane, detecting and alarming users when gases reach between 0 to 100% lower explosive limit (LEL) concentrations. The 5100-28-IT module is based on infrared (IR) technology, an accurate and stable method of detection that requires low maintenance and can operate in high combustible ...
-
Manufactured by Sensit Technologiesbased in USA
GAS•TRAC LZ-30 is a compact, hand-held methane gas detector that uses laser light for instant, accurate response to methane gas. Quickly and safely detect methane gas leaks at distances up to 100 feet. Easily access hard-to-reach locations, avoid obstacles and investigate gas hazards from a safe ...
-
Manufactured by Sierra Monitor - Mine Safety Appliances Co (MSA)based in USA
Sierra Monitor’s 5100-88-IT module monitors Carbon Dioxide (CO2), a toxic gas that is particularly dangerous in enclosed areas. This sensor monitors for adequate indoor air quality (IAQ) to ensure a healthy, comfortable, and productive work environment. The 5100-88-IT module is based on infrared (IR) technology, an accurate and stable method of detection that requires low maintenance and ...
-
Manufactured by Interscan Corporationbased in USA
Adding remote displays to an installation allows various information—acquired by the gas detection system—to be viewed at a location some distance from where the main system is installed. They are often mounted directly outside the entrance to a work area that could develop hazardous levels of a toxic gas. In certain cases, it may also be prudent to install remote displays within ...
-
Manufactured by S&S Northern Ltdbased in UNITED KINGDOM
The Merlin GDPX+ is a 16 zone gas pressure proving & detection panel which can be used in many applications, e.g. mechanical rooms, car parks, shopping centers and the most common being a boiler house application. Utilizing a solenoid valve and a pressure transducer the Merlin GDPX+ will check for a pressure drop or leak in the downstream line before allowing the gas to be supplied. Once gas ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you