Wireless Gas Detection Equipment For Monitoring And Testing Available In Oregon
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The SW-AV2-DV2E supplies two alarm lights with a sounder in a third party UL/cULus/ULc approved package. Utilizing Detcon’s wireless protocol allows use with Detcon’s family of wireless gas detection ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
technology for remote detection of gas leaks. The RMLD-CS (Remote Methane Leak Detector - Complete Solution) is a highly advanced technology, capable of detecting methane leaks from a remote distance. This technology makes it possible to detect leaks in areas that may be difficult to reach such as busy roadways, yards with dogs, fenced-off areas, bridge pipes and biogas ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Each system includes a tripod, network HMI, gas detection sensor(s), and alarm warning devices. An optional Sentinel SiteWatch provides remote access to system data via Ethernet or cellular communication. Power to the sensor assembly is supplied by a rechargeable Smart Battery Pack, disposable batteries or directly from HMI. Flexible and expandable, a Site Sentinel network can include up to 32 ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME Wireless MultiSet series is a microprocessor-based multipoint multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a 900 MHz or 2.4 GHz wireless network operating in a range of 1500-2000 ft., ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WS GasPost Series toxic or combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and transmits this value to the control panel via a 900MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
All component parts are rated for Class 1; Division 1, Group C, D hazardous areas. These advanced field devices consist of a CXT low power gas detection sensor and wireless transceiver packaged in a single enclosure. Power is provided by a disposable “C” cell battery pack capable of continuous operation for greater than 60 days. Additional power options include a Smart ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The SmartWireless Site Sentinel CX sensor station is an accessory to any Detcon wireless RXT transceiver or wireless controller and is easily and economically deployable in both permanent and temporary installations. The CX wirelessly transmits the data from up to 4 wired gas detectors back to wireless controller and includes a battery that powers the radio, alarm devices, and the attached ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Teledyne Gas and Flame Detection is proud to introduce its wireless system with the OLCT 80 field detector/transmitter. This new model allows wireless connectivity in ATEX 1 zones. The maximum range is 3km, line of sight. The type of network selected will depend on the number of field detectors, the area coverage and the network ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme WR Series Remote Relay Module operates within a CEW wireless gas detection network, acting as an addressable output to the CEW Control Panel. Each WR Relay Module provides 8 relays for the indirect activation of fans, louvers, etc at programmable set points. Since the WR Relay Module operates without the need to be hardwired to the controller, it can be located at any point within the ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Command functions include alarm reset, alarm acknowledge, alarm test and radio silence. In normal operation the control panel provides real time display of gas concentrations or the status of other field devices; battery charge levels, network RF signal quality and any number of fault diagnostic conditions affecting either an individual field device or the entire network. These fault conditions ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The hazardous location combination SW-AV1-DV2E alarm horn sounder & LED or 10J Xenon beacon/status warning light is UL/cULus/ULC approved for hazardous applications utilizing Detcon’s wireless ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The BM25 packs the benefits of a fixed system area monitor into a rugged, user-friendly and transportable instrument. It was designed to detect one to five gases for mobile or temporary work applications, team protection, area surveillance or places where fixed detection systems are not suitable. Powered by a NiMH battery pack, the BM 25 multi gas monitor offers up to 170 hours of continuous run ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Model CX sensors are equipped with standard analog 4-20mA, and Modbus RTU RS-485 outputs and can be used with SmartWireless Site Sentinel CX/CXT controllers. The CX is a very low power device making it an ideal choice for a battery powered detector (optional) in applications where power is unavailable or not economically feasible. CX gas detection sensors are easily and economically deployable ...
-
Manufactured by RC Systems, Inc.based in USA
With an ultra-low power design and easy to use features, the SenSmart 7100 is compatible with all our toxic gas detection sensors, including those for hydrogen sulfide, carbon dioxide, oxygen, hydrogen cyanide, and many others. RC Systems’ battery-powered SenSmart 7100 EC wireless gas detector is the most advanced, economical, and reliable true wireless combustible and toxic gas detection ...
-
based in USA
The Model SCA is a single-channel stand-alone fixed gas detector and/or control panel for continuous gas monitoring in industrial and laboratory applications. This versatile unit can be used in multiple ways – fitted with an integral sensor for safe area use, connected to a remote fixed gas detector for safe area use, fitted with a safety barrier and connected to a remote mounted ...
-
Manufactured by Industrial Scientificbased in USA
LENS Wireless connects devices to share alarms so teams know who’s in trouble and why, allowing for faster and safer emergency response. LENS® Wireless is the first gas detection solution that allows personal monitors and area monitors to share gas readings and alarms with one another to enable team-based safety. Now when a gas hazard, man-down, or panic situation causes an instrument ...
-
Manufactured by Tokyo Gas Engineering Solutions Corporationbased in JAPAN
Laser Falcon is a remote gas detector attachable to a drone which can detect gas leakage from the sky by irradiating laser and detecting reflected ...
-
Manufactured by Nano Environmental Technology S.r.l. (N.E.T.)based in ITALY
Our Pellistor, or catalytic bead sensor, line is selected by N.E.T. and manufactured, on OEM basis, by the companies leading in the field. The sensor monitors the presence of a combustible gas or vapor in air (or atmospheres containing oxygen) up to the Lower Explosive Limit (LEL). A Pellistor operates on the principle that when a combustible gas/air mixture is in contact with the catalyst ...
-
Manufactured by Sierra Monitor - Mine Safety Appliances Co (MSA)based in USA
Sierra Monitor’s fixed 5100-XX-IT gas module monitors toxic gases such as Hydrogen Sulfide (H2S), Carbon Monoxide (CO), Nitrogen Dioxide (NO2), Ammonia (NH3), Oxygen (O2) Deficiency, and others. The 5100-XX-IT module is based on electrochemical technology, a proven, less-expensive option that offers high accuracy, low power requirements, and sensitivity to a particular gas in the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you