Workplace Monitoring Equipment For Monitoring And Testing Available In Armenia
-
ShowcaseManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Measure Gases in Ambient and Humid Conditions. Gasmet CX4015 is designed for continuous monitoring applications in ambient conditions, such as workplace air monitoring and quality control applications. It can be used to measure up to 50 components simultaneously, and additional gases can be easily added without any hardware changes. The sample cell can be heated up to 50 °C, which allows ...
-
PremiumManufactured by Access Sensor Technologies LLCbased in USA
The respirable size cut is a standard in many countries to monitor workplace exposure to harmful dusts. This compact inlet allows for simple ergonomic sampling in the breathing zone without the hassle of large dangling cyclone ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Light-915 Mercury Analyzeris a compact instrument designed to address the problems of mercury pollution in a workplace environment and sanitary control. As with all the other Lumex mercury analyzers, the principle of measurement of Light-915 is based on atomic absorption spectrometry with Zeeman background correction, which eliminates the effect of interfering impurities. It is the only ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfectly adapted for continuous Air Quality monitoring, laboratories, environmental surveillance, quality control, etc. The VM-3000 Mercury Vapor Monitor measures continuously the Hg concentration in air and other gases. It is used for laboratory applications as well as installed at places where mercury has to be monitored. It is a great tool for many different fields of applications in ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Gravimetric Impactor (DGI) is a high sample flow rate cascade impactor for low concentration particle measurement applications. The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission measurements, air quality studies and other low concentration ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
AM-5401 portable ozone analyzer adopts the principle of untraviolet spectrohotometry and combines with advanced micro-processing technology to provide accurate and reliable low-concentration O3 detection of "ppb-ppm" level, which meets application requirements of atmospferic ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Light-915M2 is a compact, portable mercury analyzer designed for convenient direct Hg measurement in air. High accuracy and real-time operation along with small size and weight make it an excellent device for field ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Particularly when working in pits, preventative measurement of dangerous gases is essential to survival. To establish if the pit is safe to work in, the floating probe is used to take measurements at the bottom of the pit before entering. This ensures the safety of all workers. With the Multitec 520, six gases can be measured simultaneously. For this reason, this gas warning device can be used ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The Polludrone Smart is an air quality monitoring device specially developed to monitor ambient air quality. The Polludrone Smart is a compact and connected CAAQMS which offers near real-time air quality data of all the National Air Quality Index (NAQI) parameters. The ease of installation and the requirement for minimal space for deployment makes it a scalable solution to be deployed at multiple ...
-
Manufactured by DustCanary Ltdbased in UNITED KINGDOM
Wearable, compact, light-weight monitor tor real-time monitoring of workplace dust. The CPAM monitor provides an innovative extension to the capability of standard personal samplers by including a real-time aerosol sensor to give instantaneous information on respirable dust levels (PM-RESP) as well as taking workplace dust exposure samples according to the HSE's standard MDSH ...
-
Manufactured by FactoryLab B.V.based in NETHERLANDS
Thanks to the data from this sensor, one can see at a glance whether a room is occupied or not. This saves time. The FL Move is battery-powered and easy to mount, also available in a variant that is placed on the desk. ...
-
Manufactured by FactoryLab B.V.based in NETHERLANDS
The Radar is an anonymous people counter for detecting people in various rooms, such as meeting rooms, treatment rooms and classrooms. Our radar techniques are not traceable to individual personal data. ...
-
Manufactured by Morphix Technologiesbased in USA
The SafeAir Aromatic Isocyanates badge (part number 382001) detects both TDI and MDI at parts per billion (ppb) levels. A worker wears this easy-to-use badge in the breathing zone (e.g. clipped to a shirt collar) in order to monitor for aromatic isocyanates (i.e. TDI and MDI). The detection badge can also be used to monitor for TDI or MDI leaks by hanging the badge near a suspect area. A change ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
Over the years, various types of Sound Level and Octave Band Meters have been used by Industrial Hygienists and Safety Professionals for monitoring workplace noise, most requiring significant operator training and producing varying degrees of effectiveness. At Larson Davis, we believe this is because until now, Sound Level Meters were designed primarily for use by Acoustical Engineers, not for ...
-
Manufactured by Larson Davis, a division of PCB Piezotronicsbased in USA
Spark 705+ has all the features of the 705 PLUS the ability to be controlled, interrogated and downloaded by the 706RC Dosimeter/Remote Controller. This gives you the ultimate combination of tamper-proof wearability and affordability with on-demand display and control functionality. Standing up to three feet from the worker, you can instantly connect the 706RC using infrared remote capability to ...
-
based in GERMANY
GRIMM DMAs feature the Vienna-type design (Reischl et al. 1997, Winkelmayr et al. 1990), well known for highest resolution and lowest diffusional losses even for small particles. GRIMM offers a flexible design of the Vienna-type DMA with two electrodes of different length to accommodate a variety of experimental needs. For the detection we offer two assorted product lines of CPCs described in ...
-
Manufactured by Ormantine USA Ltd., Inc.based in USA
Ammonia diffusion tubes are suitable for long-term monitoring of ambient Ammonia pollution (sampling times are 2-4 weeks). These samplers are simple to use, requiring no specialist skills or power supply, making them an efficient monitoring option. With very low detection limits (in the low parts per billion range), even low levels of Ammonia pollution can be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you