XRF Analyses Applications

12 Results found
Only show results available in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: XRF Analyses ×

X-ray fluorescence for environmental research

by Bruker Corporation     based in Billerica, MASSACHUSETTS (USA)

Environmental research is perfectly supported with Bruker AXS wavelength dispersive X-ray fluorescence spectrometers (WDXRF) S8 TIGER. Accurate and precise determination of hazardous elements down to the sub-ppm level, reliable identification of elements due to high spectral resolution, high analytical performance even for light elements: The TIGER are perfectly suited for these analytical tasks.

XRF analysis for positive material identification

by Niton UK Limited     based in Woodmancott, Winchester, UNITED KINGDOM

Positive Material Identification, or PMI, is an integral part of process safety management in many industries including the petroleum refining and petrochemical. Whether the need is quality control, sorting of scrap material, or even failure analysis, materials testing to provide verification of metal alloy grade and composition is crucial to the success of many businesses.

Solutions for the electronics industry

by Oxford Instruments plc     based in Abingdon, UNITED KINGDOM

In the electronics industry, Energy dispersive X-ray Fluorescence (EDXRF) analysers are used to both identify the content and measure the thickness of metallic coatings on electrical and electronic components from printed circuit boards to connectors.

Lubricating oils for oil & gas industry

by Oxford Instruments plc     based in Abingdon, UNITED KINGDOM

Lubricating oils contain chemical additives that give the oil a greater in-service life. These additives contain a range of elements such as Calcium, Zinc, Phosphorus, Magnesium, Chlorine, Molybdenum etc whose concentration need to be measured as part of a quality control/assurance system to demonstrate conformance to specification.

Application package Ash for analysing oxidic materials

by Fluxana GmbH Co. KG     based in Bedburg-Hau, GERMANY

This application package is a `ready to go` calibration kit for xrf instruments. Fusion technology is ideal for analysing oxidic materials like ashes. It performs with the highest precision possible in xrf sample preparation. Primarily power stations and their control laboratories have to check the ash from the burning process of black and brown coal. Two standard DIN and ASTM methods describe the testing in detail. FLUXANA is able to deliver both methods ready from the bench.

Application package raw materials

by Fluxana GmbH Co. KG     based in Bedburg-Hau, GERMANY

Fusion technology is ideal for analysing oxidic materials like minerals or raw materials. It performs with the highest precision possible in xrf sample preparation. However, many laboratories cannot specify exactly what material they have to analyse. Therefore FLUXANA has created a wide range oxidic application program to allow complete analysis of the unknown material. The concentration ranges and elements of interest can be adapted to customer needs. It contains all parts to perform a complete raw material (oxidic materials) calibration with 14 elements for cement, glass, ceramic and raw materials industry. FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

XRF analysis for metals exploration & mining

by Niton UK Limited     based in Woodmancott, Winchester, UNITED KINGDOM

Niton instruments offer unprecedented performance for a variety of mining and metals exploration applications, all in the palm of your hand. Examples include: Geo-Chemical Exploration. Metal exploration and assessment. Survey & Ore-Body Assessment. Mine Mapping, Development & Grade Control. Mill Heads & Tailings. Smelter Operations. Environmental Monitoring. Mining & Mineral Assessment.

Water Analyzing for the Mining Industry

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

As a primary industry, the mining industry faces the needs for optimizing the management of its resources. Exploration and excavation activities should be as efficient as possible. Companies also aim to maintain water resources while at the same time controlling the environmental impact of their activities. As pioneers in exotic mining analytics, AppliTek can help you with a selection of application-oriented analyzers, from portable XRF systems to on-line analyzers for water and process applications.

X-ray fluorescence XRF analysis for environmental protection and waste management

by Bruker Corporation     based in Billerica, MASSACHUSETTS (USA)

To meet the requirements of new regulations and to protect the environment effectively, industries need techniques that enable the analysis of elements at lowest concentration levels. Bruker X-ray fluorescence (XRF) analysis is the most suitable analytical technique for handling different kinds of materials. Bruker’s XRF, ICP-MS, GC, TOF-MS, FT-IR, CBRNE products and applications help you to monitor contaminated land efficiently and quickly, to determine hazardous elements in the air and water, as well as to classify waste material and to specify products for recycling and disposal. Whether solids, sludge, filters, liquids or powders: there is a fast and simple sample preparation technique for every material type.

Application package cement

by Fluxana GmbH Co. KG     based in Bedburg-Hau, GERMANY

This application package is a `ready to go` calibration kit for xrf instruments. It contains all parts to perform a complete cement calibration: - Calibration set prepared from CRM as glass beads 40mm - Calibration work performed by FLUXANA expert 2 days on site - 2x drift monitors for xrf instrument - 2x control samples for validation each 10g powder for preparation on site - Flux FX-X100 FLUXANA application packages include always the sample preparation method. All packages are running in our application laboratory. You are always free to send your samples for testing free of charge. If you combine our application packages with our sample preparation machines FLUXANA garanties the analytical performance of the package like a contract.

XRF analysis for WEEE compliance & RoHS

by Niton UK Limited     based in Woodmancott, Winchester, UNITED KINGDOM

Niton instruments offer unprecedented performance for a variety of mining and metals exploration applications, all in the palm of your hand. Examples include: Geo-Chemical Exploration. Metal exploration and assessment. Survey & Ore-Body Assessment. Mine Mapping, Development & Grade Control. Mill Heads & Tailings. Smelter Operations. Environmental Monitoring. Mining & Mineral Assessment.

XRF analysis for product testing & toy safety

by Niton UK Limited     based in Woodmancott, Winchester, UNITED KINGDOM

Each week brings a new report of problems with toy safety and consumer product safety. Ultimately, contract manufacturers, importers, distributors, retailers and brand owners all face potential liability when they fail to comply with laws which restrict the levels of toxic materials in their products. Handheld Niton analysers provide quick and easy screening of toys and other consumer goods for lead, cadmium, mercury and other toxic metals. Importers, brand owners and retailers can implement a standardised inspection protocol for incoming shipments to verify compliance, while simultaneously requiring supply chain documentation based on empirical testing.

Need help finding the right suppliers?

Let the XPRTs do the work for you