Abanaki Corporation

Abanaki`s Belt Oil Skimmer Relieves a Fracking Headache -- Removing Oil From Water


Source: Abanaki Corporation

Oil Grabber(R) Model 8 Belt Oil Skimmer Key to Removing Oil From Water

CLEVELAND, OH -- (Marketwire) -- 01/10/12 -- Abanaki Corporation (http://www.abanaki.com/) was recently enlisted by a Northeastern wastewater treatment plant in search of a solution to remove oil from water. Specifically, the task at hand was to remove the oil from fracking wastewater before disposal of large volumes into the local city sewer system for further treatment. Fracking, also known as hydraulic fracturing, is a procedure widely used by natural gas drillers in which water, sand and chemicals are forced at high pressure into the ground to break up shale rock formations, thereby causing the discharge of trapped natural gas.

Oil skimming is an environmentally responsible way for wastewater treatment plant operators and their natural gas driller customers to remove trace amounts of oil from fracking wastewater prior to its disposal. Oil skimming uses the differences in specific gravity and surface tension between oil and water. The oil skimmer's belt attracts oil and other hydrocarbon liquids from the fluid's surface, where the contaminants are then scraped off the sides of the belt and discharged into a collection container.

In this application, the fracking wastewater is loaded into tanker trucks and routed to large tanks where the wastewater is treated prior to disposal. Due to its size and high removal capacity (up to 40 gallons of oil per hour), Abanaki's Oil Grabber® Model 8 Belt Oil Skimmer was the suitable choice for this application. It can be used in tanks with depths as shallow as one foot or as deep as 100 feet. The Oil Grabber is an effective method of removing oil and other hydrocarbons from the fracking fluid before filtration and the final stage of disposal into the sewer system.

Oil skimming is the most economical, lowest-maintenance method for removing floating oil, grease, fuel and other hydrocarbons from water. Companies use Abanaki oil skimmers in a wide range of applications, ranging from industrial wastewater, groundwater remediation, and machine shop coolant. In these roles, skimmers help companies meet municipal and EPA water quality standards and extend the life of coolant used in machine tool operations. Oil skimming is also used as a pre-treatment for filtration, to prevent oil from blinding filter media.

About AbanakiCorporation -- Abanaki, the world leader in oil skimmer products, manufactures a wide range of products to remove oils, greases, solvents, and related hydrocarbons from water, groundwater and industrial effluent. Belt, tube and disk oil skimmer models are available with removal rates ranging from 1 to 200 gallons per hour in both stationary and portable systems. Headquartered in Cleveland, Ohio, and with an office in the UK, Abanaki has served a global customer base in industries as diverse as iron and steel, wastewater, paper, food processing, automotive, environmental remediation and recycling for more than 40 years. Today, under the corporate motto 'Making it Easy to Clean Our World®', Abanaki addresses pollution in industry through low total cost of ownership, constant innovation, and environmental stewardship.

For more information, call (440) 543-7400, (800) 358-SKIM (7546), or e-mail: skimmers@abanaki.com. See the full line of Abanaki products and demos at http://www.abanaki.com/206.

For high resolution image: http://www.abanaki.com/images/Model8Hires.jpg

Cindy Toth
Abanaki Corporation
(800) 358-SKIM (7546)
Email Contact

Mark Johnson
Goldstein Group Communications
(440) 914-4700
Email Contact

Customer comments

No comments were found for Abanaki`s Belt Oil Skimmer Relieves a Fracking Headache -- Removing Oil From Water. Be the first to comment!