ASTM A751 - 11 standard test methods, practices, and terminology for chemical analysis of steel products
1.1 These test methods, practices, and terminology cover definitions, reference methods, practices, and guides relating to the chemical analysis of steel, stainless steel, and related alloys. It includes both wet chemical and instrumental techniques.
1.2 Directions are provided for handling chemical requirements, product analyses, residual elements, and reference standards, and for the treatment and reporting of chemical analysis data.
1.3 These test methods, practices, and terminology apply only to those product standards which include these test methods, practices, and terminology, or parts thereof, as a requirement.
1.4 In cases of conflict, the product specification requirements shall take precedence over the requirements of these test methods, practices, and terminology.
1.5 Attention is directed to ISO/IEC 17025 when there may be a need for information on criteria for evaluation of testing laboratories.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately)
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E30 Test Methods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, and Wrought Iron
E50 Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
E59 Practice for Sampling Steel and Iron for Determination of Chemical Composition
E60 Practice for Analysis of Metals, Ores, and Related Materials by Molecular Absorption Spectrometry
E212 Test Method for Spectrographic Analysis of Carbon and Low-Alloy Steel by the Rod-To-Rod Technique
E293 Test Method for Spectrographic Determination of Acid-Soluble Aluminum in Low-Alloy Steel by the Solution Technique
E322 Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels and Cast Irons
E327 Test Method for Optical Emission Spectrometric Analysis of Stainless Type 18-8 Steels by the Point-To-Plane Technique
E350 Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
E352 Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels
E353 Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
E354 Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys
E403 Method for Optical Emission Spetrometric Analysis of Carbon and Low-Alloy Steel by the Point-To-Plane Technique
E404 Test Method for Spectrographic Determination of Boron In Carbon and LowAlloy Steel by the Point-To-Plane Technique
E415 Test Method for Atomic Emission Vacuum Spectrometric Analysis of Carbon and Low-Alloy Steel
E421 Test Method for Spectrographic Determination of Silicon and Aluminum in High-Purity Iron
E485 Test Method for Optical Emission Vacuum Spectrometric Analysis of Blast Furnace Iron by the Point-to-Plane Technique
E548 Guide for General Criteria Used for Evaluating Laboratory Competence
E572 Test Method for Analysis of Stainless and Alloy Steels by X-ray Fluorescence Spectrometry
E663 Practice for Flame Atomic Absorption Analysis
E743 Guide for Spectrochemical Laboratory Quality Assurance
E851 Practice for Evaluation of Spectrochemical laboratories
E882 Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
E1019 Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
E1024 Guide for Chemical Analysis of Metals and Metal Bearing Ores by Flame Atomic Absorption Spectrophotometry
E1063 Test Method for X-Ray Emission Spectrometric Determination of Cerium and Lanthanum in Carbon and Low-Alloy Steel
E1085 Test Method for X-Ray Emission Spectrometric Analysis of Low-Alloy Steels
E1086 Test Method for Atomic Emission Vacuum Spectrometric Analysis of Stainless Steel by Point-to-Plane Excitation Technique
E1087 Practice for Sampling Molten Steel From a Ladle Using an Immersion Sampler to Produce a Specimen for Emission Spectrochemical Analysis
E1097 Guide for Direct Current Plasma-Atomic Emission Spectrometry Analysis
E1184 Practice for Electrothermal (Graphite Furnace) Atomic Absorption Analysis
E1282 Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials
E1329 Practice for Verification and Use of Control Charts in Spectrochemical Analysis
ISO/IEC17025 General Requirements for the Competence of Testing and Calibration Laboratories
cast analysis; chemical analysis; heat analysis; product analysis; reference materials; Chemical analysis--metals/alloys; Chemical analysis--steel; Steel; Terminology--metals/alloys materials/applications;
ICS Number Code 77.040.30 (Chemical analysis of metals)
ASTM International is a member of CrossRef.