ASTM C125 - 11b Standard Terminology Relating to Concrete and Concrete Aggregates

0

Source: ASTM International

1. Scope

1.1 This standard is a compilation of definitions of terms as they are used in standards under the jurisdiction of Committee C09.

1.2 Other terminology under the jurisdiction of Committee C09 is included in two specialized standards. Terms relating to constituents of concrete aggregates are defined in Descriptive Nomenclature C294. Terms relating to constituents of aggregates for radiation-shielding concrete are defined in Descriptive Nomenclature C638.

1.3 Related terminology for hydraulic cement is included in Terminology C219. Additionally, the American Concrete Institute has an electronic document, ACI Concrete Terminology, which is updated periodically. While this ACI Terminology is a useful resource, it shall not be referenced directly in ASTM standards because it is not a consensus document. The use of individual ACI or other definitions in ASTM standards shall be in accordance with Form and Style, Section E5.9, Attributions.

1.4 When a term is used in an ASTM standard for which Committee C09 is responsible, it is included herein only if used in more than one Committee C09 standard.

Note 1—The subcommittee responsible for this standard will review definitions on a five-year basis to determine if the definition is still appropriate as stated. Revisions will be made when determined necessary. The year shown in parentheses at the end of a definition indicates the year the definition or revision to the definition was approved. A letter R and a year indicate when the definition was reviewed. No date indicates the term has not yet been reviewed.

2. Referenced Documents (purchase separately)

ASTM Standards
C143/C143M Test Method for Slump of Hydraulic-Cement Concrete
C219 Terminology Relating to Hydraulic Cement
C294 Descriptive Nomenclature for Constituents of Concrete Aggregates
C403/C403M Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
C494/C494M Specification for Chemical Admixtures for Concrete
C511 Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C638 Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete
C939 Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
C1074 Practice for Estimating Concrete Strength by the Maturity Method
C1240 Specification for Silica Fume Used in Cementitious Mixtures
C1437 Test Method for Flow of Hydraulic Cement Mortar
C1610/C1610M Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
C1611/C1611M Test Method for Slump Flow of Self-Consolidating Concrete

Index Terms

0 Aggregate; Concrete; Concrete aggregates; Terminology--paving materials

ICS Code

ICS Number Code 91.100.30 (Concrete and concrete products)

DOI: 10.1520/C0125-11B

ASTM International is a member of CrossRef.

Customer comments

No comments were found for ASTM C125 - 11b Standard Terminology Relating to Concrete and Concrete Aggregates. Be the first to comment!