ASTM International

ASTM D2724 - 07(2011)e1 standard test methods for bonded, fused, and laminated apparel fabrics


Source: ASTM International

These test methods for the determination of properties of bonded, fused, or laminated apparel fabrics, are considered satisfactory for acceptance testing of commercial shipments of bonded and laminated apparel fabrics since the methods have been used extensively in the trade for acceptance testing.

If there are differences of practical significance between reported test results for two laboratories (or more), comparative tests should be performed to determine if there is a statistical bias between them, using competent statistical assistance. As a minimum, use the samples for such a comparative test that are as homogeneous as possible, drawn from the same lot of material as the samples that resulted in disparate results during initial testing. Randomly assign specimens in equal numbers to each laboratory. The test results from the laboratories involved should be compared using a statistical test for unpaired data and a probability level chosen prior to the testing series. If bias is found, either its cause must be found and corrected, or future test results for that material must be adjusted in consideration of the known bias.

1. Scope

1.1 These test methods cover procedures for characterizing the delamination, strength of bond, appearance, and shrinkage propensity of bonded, fused, and laminated apparel fabrics after drycleaning and laundering.

1.2 The values stated in SI units are to be regarded as standard; the values in parentheses are provided as information only.

1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)

ASTM Standards
D76 Specification for Tensile Testing Machines for Textiles
D123 Terminology Relating to Textiles
D1776 Practice for Conditioning and Testing Textiles
D4850 Terminology Relating to Fabrics and Fabric Test Methods
E337 Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures)

AATCC Standard
124 Appearance of Durable Press Fabrics After Repeated Home Launderings

Index Terms

apparel; bonded fabric; delamination strength; Textile fabrics (bonded and laminated); Apparel fabrics; Appearance of textile materials/applications; Bonded and laminated apparel fabrics; Bond strength; Delamination--textiles; Ironing; Laundry materials/applications; Shrinkage--textile fabrics/fibers

ICS Code

DOI: 10.1520/D2724-07R11E01

ASTM International is a member of CrossRef.

Customer comments

No comments were found for ASTM D2724 - 07(2011)e1 standard test methods for bonded, fused, and laminated apparel fabrics. Be the first to comment!