ASTM D2786 - 91(2011) standard test method for hydrocarbon types analysis of gas-oil saturates fractions by high ionizing voltage mass spectrometry

0

Source: ASTM International

A knowledge of the hydrocarbon composition of process streams and petroleum products boiling within the range of 205 to 540°C (400 to 1000°F) is useful in following the effect of changes in process variables, diagnosing the source of plant upsets and in evaluating the effect of changes in composition on product performance properties.

This test method, when used together with Test Method D3239, provides a detailed analysis of the hydrocarbon composition of such materials.

1. Scope

1.1 This test method covers the determination by high ionizing voltage mass spectrometry of seven saturated hydrocarbon types and one aromatic type in saturate petroleum fractions having average carbon numbers 16 through 32. The saturate types include alkanes (0-rings), single-ring naphthenes, and five fused naphthene types with 2, 3, 4, 5, and 6 rings. The nonsaturate type is monoaromatic. Noncondensed naphthenes are analyzed as single rings. Samples must be nonolefinic and must contain less than 5 volume % monoaromatic. Composition data are in volume percent.

1.2 The values stated in acceptable SI units are to be regarded as the standard. The values given in parentheses are provided for information purposes only.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)

ASTM Standards
D2549 Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
D3239 Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry
E137 Practice for Evaluation of Mass Spectrometers for Quantitative Analysis from a Batch Inlet

Index Terms

gas oil; mass spectrometry; petroleum; saturates;

ICS Code

ICS Number Code 75.080 (Petroleum products in general)

DOI: 10.1520/D2786-91R11

ASTM International is a member of CrossRef.

Customer comments

No comments were found for ASTM D2786 - 91(2011) standard test method for hydrocarbon types analysis of gas-oil saturates fractions by high ionizing voltage mass spectrometry. Be the first to comment!