ASTM International

ASTM D5740 - 11 standard guide for writing material standards in the classification D4000 format


Source: ASTM International

This guide has been prepared to aid in the writing of material standards using the Classification D 4000 format.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This classification system covers ___ materials suitable for _____________. The inclusion or exclusion of recycled plastics in this classification system must be addressed here.

1.2 The properties included in this standard are those required to identify the compositions covered. Other requirements necessary to identify particular characteristics important to specialized applications are to be specified by using suffixes as given in Section 5.

1.3 This classification system and subsequent line callout (specification) are intended to provide a means of calling out plastic materials used in the fabrication of end items or parts. It is not intended for the selection of materials. Material selection can be made by those having expertise in the plastic field only after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the costs involved, and the inherent properties of the material other than those covered by this standard.

Note 1—Insert Note 1 here to show the appropriate ISO equivalency statement.

1.4 The following precautionary caveat pertains only to the test method portion, Section 11, of this classification system: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)

ASTM Standards
D618 Practice for Conditioning Plastics for Testing
D883 Terminology Relating to Plastics
D1600 Terminology for Abbreviated Terms Relating to Plastics
D3892 Practice for Packaging/Packing of Plastics
D4000 Classification System for Specifying Plastic Materials
D5205 Classification System for Polyetherimide (PEI) Materials
D5630 Test Method for Ash Content in Plastics
D6779 Classification System for Polyamide Molding and Extrusion Materials (PA)
D7209 Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products
E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

ISO Standards
ISO3451–1 Plastics--Determination of Ash Content--Part 1: General Methods

Index Terms

Classification (standards)--plastics; Line call-out specifications--plastics; Plastic materials; Writing specifications;

ICS Code

ICS Number Code 01.120 (Standardization. General rules); 35.260 (Office machines); 85.080 (Paper products)

DOI: 10.1520/D5740-11

ASTM International is a member of CrossRef.

Customer comments

No comments were found for ASTM D5740 - 11 standard guide for writing material standards in the classification D4000 format. Be the first to comment!