ASTM International

ASTM D6862 - 11 Standard Test Method for 90 Degree Peel Resistance of Adhesives


Source: ASTM International

This test method is useful for acceptance and quality control testing. Adherends, application procedure, and sample conditioning shall be as agreed upon by the manufacturer and the user of the adherends and the adhesive.

1. Scope

1.1 This test method covers the determination of the resistance-to-peel strength of an adhesive bond between one rigid adherend and one flexible adherend when tested at an angle of approximately 90 degrees under specified conditions of preparation and testing.

1.2 A variation in thickness of the adherends will generally influence test values. For this reason, the thickness of the adherends used to make the test specimens shall be specified in the material specification. When no thickness is specified, the flexible adherend shall be 0.60 mm (0.025 in.) thick and the rigid adherend shall be 1.60 mm (0.060 in.) thick.

Note 1—A heavy fabric, such as canvas, has been used as a flexible adherend.

1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)

ASTM Standards
D907 Terminology of Adhesives
E4 Practices for Force Verification of Testing Machines
E177 Practice for Use of Terms Precision and Bias in ASTM Test Methods

Index Terms

adhesives; assemblies; bonds; laminates; peel; Acceptance criteria/testing; Adhesives; Assemblies; Bond strength--adhesives; Laminates (adhesive applications); Peel strength tests--adhesives; Quality control (QC)--adhesives; Rigid adherends

ICS Code

ICS Number Code 83.180 (Adhesives)

DOI: 10.1520/D6862-11

ASTM International is a member of CrossRef.

Customer comments

No comments were found for ASTM D6862 - 11 Standard Test Method for 90 Degree Peel Resistance of Adhesives. Be the first to comment!