ASTM E1110 - 06(2011) Standard Classification for Determination of Articulation Class


Source: ASTM International

Each weighting factor given in Table 1 represents the fraction of overall speech intelligence contained within the associated one-third octave frequency band.

The weighting factors in Table 1 are obtained by multiplying each individual one-third octave band weighting factor of ANSI S3.5-1969 by 300. Articulation class (AC) values are thus related to but distinctly different from articulation index (AI) values. In particular, the AC considers only the effect of signal attenuation; while the AI considers such additional factors as speech level and spectrum and background sound level and spectrum.

Note 2—The AC is similar to the DAI rating proposed by Warnock6 and has been shown to correlate with AI values derived from ANSI S3.5, except where the AI approaches 1 or 0 (AI values range between 1 and 0 and approach 0 with increasing privacy and nonintelligibility). Articulation class values give the reverse. They usually exceed 100 and increase with increasing privacy and nonintelligibility. Extensive comparison between AC ratings and subjective judgments of open-plan speech privacy has not yet been accomplished.

1. Scope

1.1 This classification provides a single figure rating that can be used for comparing building systems and subsystems for speech privacy purposes. The rating is designed to correlate with transmitted speech intelligence between office spaces.

1.2 Excluded from the scope of this classification are applications involving female speakers or children, languages other than English, and sound spectra other than speech. Thus excluded, for example, would be comparisons of building systems or subsystems for their effectiveness in reducing transmitted noise from machinery, industrial processes, bowling alleys, music rooms, places of entertainment, and the like. Published work by Pearsons, et al, may eventually permit the restriction on female speakers to be relaxed.

2. Referenced Documents (purchase separately)

ASTM Standards
E1111 Test Method for Measuring the Interzone Attenuation of Open Office Components

ANSI Standard
S3.5 -1969 Methods for the Calculation of the Articulation Index

Index Terms

architectural acoustics; articulation class; open office; open-plan space; sound attenuation; speech privacy;

ICS Code

ICS Number Code 17.140.01 (Acoustic measurements and noise abatement in general)

DOI: 10.1520/E1110-06R11

ASTM International is a member of CrossRef.

Customer comments

No comments were found for ASTM E1110 - 06(2011) Standard Classification for Determination of Articulation Class. Be the first to comment!