ASTM International

ASTM E2014 - 11 Standard Guide on Metallographic Laboratory Safety


Source: ASTM International

1. Scope

1.1 This guide covers the outline of the basic safety guidelines to be used in a metallographic laboratory. Safe working habits are discussed for various tasks performed in a metallographic laboratory.

1.2 The sections appear in the following order

This guide does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)

ASTM Standards
E3 Practice for Preparation of Metallographic Specimens
E7 Terminology Relating to Metallography
E340 Test Method for Macroetching Metals and Alloys
E407 Practice for Microetching Metals and Alloys
E883 Guide for Reflected-Light Photomicrography
E1180 Practice for Preparing Sulfur Prints for Macrostructural Examination
E1558 Guide to Electrolytic Polishing of Metallographic Specimens

Index Terms

chemical spills; etching; fume hoods; grinding; heat treating; metallography; MSDS; photography; polishing; radiation; safety; specimen; sulfur printing; X-ray;

ICS Code

ICS Number Code 71.040.20 (Laboratory ware and related apparatus)

DOI: 10.1520/E2014-11

ASTM International is a member of CrossRef.

Customer comments

No comments were found for ASTM E2014 - 11 Standard Guide on Metallographic Laboratory Safety. Be the first to comment!