ASTM International

ASTM E697 - 96(2011) Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography


Source: ASTM International

This practice describes the principles, construction details, operation and performance, and terms and relationships for the use of an electron-capture detector (ECD) as the detection compon78916.00

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope

1.1 This practice covers the use of an electron-capture detector (ECD) as the detection component of a gas chromatographic system.

1.2 This practice is intended to describe the operation and performance of the ECD as a guide for its use in a complete chromatographic system.

1.3 For general gas chromatographic procedures, Practice E260 or Practice E1510 should be followed except where specific changes are recommended in this practice for use of an ECD. For a definition of gas chromatography and its various terms, see Practice E355. These standards also describe the performance of the detector in terms which the analyst can use to predict overall system performance when the detector is coupled to the column and other chromatographic components.

1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific safety information, see Section 3.

2. Referenced Documents (purchase separately)

ASTM Standards
E260 Practice for Packed Column Gas Chromatography
E355 Practice for Gas Chromatography Terms and Relationships
E1510 Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs

CGA Standards
HB-3 Handbook of Compressed Gases

Federal Standard
Title10, Code of Federal Regulations, Part 20

Index Terms

electron-capture detector (ECD); gas chromatography (GC) ; Conductivity detectors/detection; Electron-capture detectors (ECD); Gas chromatography (GC)

ICS Code

ICS Number Code 71.040.50 (Physicochemical methods of analysis)

DOI: Active

ASTM International is a member of CrossRef.

Customer comments

No comments were found for ASTM E697 - 96(2011) Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography. Be the first to comment!