ASTM International

ASTM F1147 - 05(2011) standard test method for tension testing of calcium phosphate and metallic coatings


Source: ASTM International

The tensile test method is recommended for tension testing of calcium phosphate/substrate or porous metal coating/substrate combinations and can provide information on the adhesive or cohesive strength of coatings under (uniaxial) tensile stress.

The test method may be useful for comparative evaluation of adhesive or cohesive strengths of a variety of types of coatings. Coatings may be applied using a variety of methods, including but not limited to plasma-spraying and sintering. Information developed using this test method may be useful for certain quality control and design purposes.

The test should not be considered to provide an intrinsic value for utilization directly in making calculations such as determining the ability of a coating to withstand specified environmental stresses.

Processing variables such as substrate preparation prior to coating, surface texture, coating technique variables or postcoating heat treatment variables may introduce a significant effect on the results of the tension test. The specimen being evaluated must be representative of the actual end use coating.

1. Scope

1.1 This test method covers tension testing of calcium phosphate and metallic porous coatings adhering to dense metal substrates at ambient temperatures. It assesses the degree of adhesion of coatings to substrates, or the internal cohesion of a coating in tension normal to the surface plane.

1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)

ASTM Standards
E4 Practices for Force Verification of Testing Machines
E6 Terminology Relating to Methods of Mechanical Testing
E8 Test Methods for Tension Testing of Metallic Materials
F1501 Test Method for Tension Testing of Calcium Phosphate Coatings

Index Terms

adherence; ceramic materials; hydroxylapatite; interface; porous coating; tension testing; tribasic calcium phosphate: Adhesive bonds; Bonding; Coatings (metal); Coatings (surgical implants); Cohesive strength; Loading tests--surgical materials/applications; Metallic coatings; Plasma-sprayed coatings; Porosity--medical/surgical materials; Quality control (QC)--metals; Sintered metal fiber mat; Sintered microspheres; Substrates--surgical implant applications; Tensile properties/testing--surgical implants; Testing methods--surgical implants; Void metal coatings;

ICS Code

ICS Number Code 25.220.40 (Metallic coatings)

DOI: 10.1520/F1147-05R11

ASTM International is a member of CrossRef.

Customer comments

No comments were found for ASTM F1147 - 05(2011) standard test method for tension testing of calcium phosphate and metallic coatings. Be the first to comment!