ASTM F1436 - 11 standard guide for center serving diameter dimensions for archery bow strings

0

Source: ASTM International

This guide is not meant to be all inclusive since there are, and will continue to be, special circumstances that will dictate the use of nonconforming dimensions. These special circumstances and the requirements that they establish cannot be totally anticipated and therefore must be treated individually.

These guidelines are based on an analysis of presently used materials for the manufacture of bow strings and the strength requirements dictated by archery bows falling within a draw weight range of 0 to 100 lb (0 to 444.8 N).

These guidelines also address the desirability of proper fit of the arrow nock to the center serving.

1. Scope

1.1 This guide covers the formulation of preliminary guidelines for the outside diameter dimensions of the center servings for the shooting strings for archery bows.

1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Index Terms

bow string; center serving; nock; slot; string hole;

ICS Code

ICS Number Code 97.220.40 (Outdoor and water sports equipment)

DOI: 10.1520/F1436-11

ASTM International is a member of CrossRef.

Customer comments

No comments were found for ASTM F1436 - 11 standard guide for center serving diameter dimensions for archery bow strings. Be the first to comment!