HPR-30 Install at Nanofabrication Core Lab, KAUST
Our Installation Engineer, Andrea Secco – Applications Specialist, has been working at the Nanofabrication Core Lab at KAUST to install a HPR-30 System.
Nabeel Aslam and John Bruce (pictured below) will be using the instrument for monitoring of their monitor the ALD (atomic layer deposition) processes.
One of the key uses is for verification of the chamber after inert gas flushing process, to ensure successful cleaning between use of different precursors.
The below data shows an experiment carried out using the HPR-30 system using trimethylaluminium (TMA) as precursor and clearly shows the cycles of the injections of TMA alternated with Oxygen plasma.
Visit their website: Nanofabrication Core Labs, KAUST
-
Most popular related searches
Related news
-
liquid distributor in packed columns
The liquid distributor is an extremely critical internal part of the packed tower, which not only affects the mass transfer efficiency of the packing but also impacts the operating flexibility of the packing. Liquid distributors are used to evenly distribute a liquid stream over a packed column in order to maximize the efficiency of mass transfer and heat transfer. They are commonly used in chemical and petrochemical plants and are especially important in distillation, absorption, and stripping processes. YUBO...
-
Precise Gas Line Control For Industrial Ovens & Furnaces With ST75 Thermal Mass Flow Meter
The compact, advanced ST75 Air/Gas Flow Meter from Fluid Components International (FCI), which measures fuel gas, process gas, inert gas, waste gases and air in small line sizes, is ideal for optimizing natural gas flow control for industrial ovens, heat chambers and furnaces to reduce process and plant fuel costs. Natural gas fueled industrial ovens, heat chambers and furnaces are used in a wide variety of heating process applications. Two of the most common types of industrial ovens are the batch oven and the...
-
Why Purchase a Tire Pyrolysis Plant?
Generally, the tire pyrolysis plant will come in two major groups: the continuous type along with the batch pyrolysis plant. You could have already guessed how the batch type applies a batch for feeding the raw materials into the machine. However, you cant ever find this machine feeding the raw materials and discharging them as well. The subsequent process could only begin after cooling down the tyres pyrolysis plant and discharging the carbon black.With regards to the continuous pyrolysis plant, it adopts an...
-
Why Should You Buy a Tire Pyrolysis Plant?
However, you cant ever find this machine feeding the raw materials and discharging them concurrently. The subsequent procedure can only begin after cooling on the machine and discharging the carbon black. With regards to the continuous pyrolysis plant, it adopts another approach. In cases like this, the feeding of materials occurs with a particular side. Generally, these raw materials might comprise tires and plastic. In discharging, carbon black is the primary final product and is continuously discharged from...
-
Chlorine Gas Safety: Preventing Chlorine Gas Leaks In Redlands, California
Interviewee: Paul Mariscal, City of RedlandsWater Production Operations Supervisor Preventing Leaks in Redlands, California Seventy miles to the east of downtown Los Angeles you’ll find the City of Redlands, California. This quiet community, with views of the San Bernardino Mountains, is home to roughly 73,000 people. They get their drinking water from two separate watersheds, one of which is handled by the Henry Tate Treatment Plant, which uses chlorine gas to disinfect and process an average of 8...
Customer comments
No comments were found for HPR-30 Install at Nanofabrication Core Lab, KAUST. Be the first to comment!