Simple Solutions Distributing LLC

Introducing the Wolverine Brand Recirculating Molecular Air Scrubber Model RMS-800

0

Source: Simple Solutions Distributing LLC

Simple Solutions Distributing has been designing and building molecular air scrubbers for the wastewater industry since 2003. With the introduction of the RMS-800 we bring our odor control expertise to the regulated cannabis market. The RMS-800 is designed for cannabis grow rooms, greenhouses, and processing rooms. It can also be used in evidence rooms, morgues, funeral homes, or anywhere volatal organic compounds (VOCs) are causing an unwanted odor and where venting the filtered air to the outside is either not desired or not practical. The RMS-800 has a small footprint of just 24”by 24” and a height of 60-1/8”. It can be customized for individual applications. It comes standard with 250lbs of activated carbon and a Merv 7 prefilter to remove mold spores, dust, skin cells and any particles from 3.0 to 10.0 microns.

For more information contact:

IndustrialOdorControl.com, 973-846-7817 - sales@industrialodorcontrol.com

Specifications

  • Two-stage filtration system with
    • Merv 7 pre-filter for removal of mold spores, dust and other contaminants.
      • 7.5 cf carbon bed (250 lbs) GC-C40 activated carbon to remove terpenes and other odor causing molecules
      • .56 seconds Bed contact time @ 800 cfm
      • 2 air exchanges per hour for a 50x50x10 room
  • 800 CFM airflow
    • Industrial pressure blower to ensure proper airflow as filter loads with contaminates
    • Standard voltage- 110-220/1/60
      • Optional voltages/phase - 208-230/460V/3/60
    • CSA/UL Listed Motor and Electrical Components
  • Made of 16-gauge carbon steel
    • Stainless available as an option
  • Height: 60-1/8 in (152.3 cm)
  • Diameter: 24” 61 cm
  • Weight: 160 lbs empty / 410 lbs with carbon
  • Inlet: Radial up-flow filter with .125” inlets spaced on centers 3/8” with 40% open space
  • Inlet to carbon bed- surface area 1447 square inches
  • Inlet to air plenum –surface area 290 square inches
  • Outlet: 5-inch pipe – surface area 19.6 square inches
  • Two 4” fill ports for easy carbon change outs
  • Magnehelic differential pressure gauge to monitor pressure drop
    • Pressure drop of empty housing @ 800 CFM – 2.5 in/ H2O
    • Pressure drop filter with full load of carbon @800 CFM 3 in/H2O
  • Condensation drain
  • 6-inch diameter inner air plenum
  • Built in skid for easy lifting to mount above workspace
    • Forklift slots are 4 ¾” x 1 ¾” 15.25 inches on center
    • Optional casters that easily slide into fork slots
  • 4 Lift points for mounting to winch to hold above workspace
  • Decibel level: 80 @ 1M
  • Energy consumption 2238 kWh (2000 h/year)
    • Running Cost / Year $246 Based on 440V 3 Phase

Customer comments

No comments were found for Introducing the Wolverine Brand Recirculating Molecular Air Scrubber Model RMS-800. Be the first to comment!