4-gas combustion analyser News

  • LAND launches NEW Lancom 4 – portable flue gas analyser

    The NEW Lancom 4 is a Portable Gas Analyser for industrial applications. Its compact design ensures ease-of-use on site for combustion efficiency and emissions monitoring measurements in all boiler system and pollutant gas processes. Building on the success of the Lancom III, the new Lancom 4 represents the next generation of portable gas analyser technology. It has the capability to monitor up ...


    By AMETEK Land

  • TUV Success for GCEM40 Series Gas Analyser

    CODEL International has recently obtained TUV certification for its multi-channel in-situ gas analyser, the 40 Series. This latest generation gas analyser has been proving it’s self in the far eastern markets where it has achieved much success. With the recent addition of TUV certification CODEL now intend to introduce the 40 Series analyser into the European ...


    By Codel International Ltd

  • New gas analysers have remote connectivity

    Signal Group (UK) manufactures instruments for monitoring a large number of gases, but their stand (#60) at AQE 2018 will focus on the latest technologies for the measurement of VOCs. The new Series IV gas analysers have 3G, 4G, GPRS, Bluetooth and satellite compatibility, and each instrument is built with its own IP address. As a result, users will be provided ...


    By Signal Group Ltd

  • FTIR gas analyser supports carbon capture research

    The development of carbon capture and storage (CCS) technologies relies on the accurate measurement of carbon dioxide (CO2) in addition to a wide array of other gases because it is vitally important that the process does not impact upon the emissions of other greenhouse gases and potential pollutants. An advanced FTIR multiparameter gas analyser from Gasmet Technologies is therefore being ...


    By Gasmet Technologies Oy

  • UK gas analyser manufacturer seeks US partner

    For over 40 years, Signal Group has been a leading manufacturer of reference gas analysers employing flame ionisation detectors (FID), chemiluminescence detectors (CLD), and a variety of non-dispersive infra-red (NDIR) technologies. Following the launch of the company’s Series IV analysers, Signal is looking to expand its presence overseas and welcomes expressions of interest from ...


    By Signal Group Ltd

  • Hired emissions analyser checks gas rig in Burma

    Following the installation of a turbine on a natural gas rig off the coast of Burma, it was necessary for Siemens Industrial Turbomachinery Ltd (SITL) to analyse emissions from the turbine and a hired Testo 350 XL emissions analyser from Ashtead Technology proved ideal for the application. Based in Lincoln, SITL designs, manufactures, installs and provides life time support for gas turbines used ...


    By Ashtead Technology Ltd

  • MCERTS award for VOC emissions analyser

    Quantitech has announced that the Sick 3006 portable VOC monitor has a new MCERTS certificate, valid to July 2019. The company’s Dominic Duggan says: “This is important news for any process that needs to report total hydrocarbon emissions data; MCERTS is essential for monitoring Part A processes, however, as a portable instrument, the 3006 is also ideal for Part B processes and stack ...


    By Quantitech Ltd

  • Stricter monitoring requirements for combustion emissions

    The new monitoring requirements being imposed on Medium Combustion Plants (MCPs) and Large Combustion Plants (LCPs) in Europe is symptomatic of environmental initiatives affecting a wide variety of industries. In the following article, Dr Andrew Dixon from Gasmet Technologies UK (formerly Quantitech) explains how instrumentation manufacturers are responding to these new challenges. The ...


    By Gasmet Technologies Oy

  • TOC Analysers for IECEx and ATEX zones

    Total Organic Carbon analysers are commonly used to measure the level of organic contamination in water. Online TOC analysers installed in refineries and petrochemical plants are located right in the middle of the process facilities. Here explosive gasses, vapours or mist can be present. It is a high risk situation, as any spark or any heat source may cause an explosion. Hence, explosive ...


    By LAR Process Analysers AG

  • Emissions analyser helps manage power station

    A multiparameter emissions monitor at Thetford power station is being used to demonstrate to the UK Environment Agency that the plant is performing within the conditions of its environmental permit. However, the data from the analyser, which was supplied by Gasmet distributor Quantitech, also performs a vitally important role in helping to manage the plant. “Individual gas readings are ...


    By Gasmet Technologies Oy

  • Old Emissions Analysers - Wanted Dead or Alive…

    Ashtead Technology is offering a trade-in for old emissions analysers, no matter what their condition or manufacturer. As part of the deal, customers will receive money off a new Testo 350 or Testo 340. The Testo 350 is an industrial emissions and combustion analyser, capable of measuring up to six gases simultaneously from a selection including O2, CO, COlow, NO, NOlow, SO2, H2S, CO2 and CH. ...


    By Ashtead Technology Ltd

  • New MCERTS certified portable FID emissions analysers

    Quantitech has supplied large numbers of MCERTS approved FID analysers in the UK for many years. These instruments are employed for the monitoring of TOC gas emissions in regulated processes. However, the Bernath 3006 analyser that was supplied for this purpose has been discontinued and Quantitech MD Ken Roberts says: “We are delighted to announce that we have replaced the 3006 with the ...


    By Quantitech Ltd

  • Landfill and Biogas gas monitoring

    Landfill and biogas provide a source of readily available and renewable energy. However, as a source of energy care has to be taken to understand and quantify impurities in the raw gas that can have an effect on either the amount of energy products, or contaminants that can foul the energy generators (siloxanes). ETG can provide analysis solutions to qualify and quantify these impurities. Gas ...

  • AMETEK Land Reintroduces Continuous Emissions Monitoring System for Smaller Combustion Processes

    AMETEK Land announces the reintroduction of the FGA 900 Series, its compact and fully integrated continuous emissions monitoring system (CEMS) for flue gas measurements on processes burning natural gas and biomass. The FGA 900 Series is an extractive sampling multi-gas analyser, which provides accurate ...


    By AMETEK Land

  • Engine emissions analyser further improves Intertek’s emissions testing capabilities

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions.  The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from ...


    By Gasmet Technologies Oy

  • Engine emissions analyser further improves Intertek’s emissions testing capability

    An advanced FTIR analyser installed at Intertek’s engine test facility in Milton Keynes is enabling engineers to improve the quality of their tests on the gaseous components of engine exhaust emissions. The gas analyser manufactured by Gasmet Technologies and installed by their UK subsidiary, Quantitech, measures multiple organic and inorganic components simultaneously from a large library ...


    By Quantitech Ltd

  • EPA analysis finds combustion chemical, coal tar constituent carcinogenic to humans

    The Environmental Protection Agency on Aug. 21 released a draft toxicological review of benzo[a]pyrene that found the combustion byproduct and coal tar constituent is carcinogenic to humans and harmful to developing organs and systems. “There is no known commercial use for benzo[a]pyrene,” which is part of a family of air ...


    By Bloomberg BNA

  • Innovation drives flue gas treatment

    Sharing a common goal, experts in emissions monitoring and emissions abatement have formed a working partnership to develop innovative new materials for treating pollutants in flue gas emissions. A business strategy with a heavy focus on innovation has enabled Lhoist, a family owned Belgian company, to become one of the world’s leading providers of Flue Gas ...


    By Gasmet Technologies Oy

  • Gas analyzers accelerate business growth

    Transportable multi-parameter analytical instruments have been key to the growth of an analytical services company based in Elk City, Oklahoma. Great Plains Analytical Services (GAS) operates a fleet of mobile monitoring systems, providing onsite gas analysis for customers across the USA, and Gasmet FTIR analyzers have enabled the company to offer a comprehensive onsite monitoring service. ...


    By Gasmet Technologies Oy

  • QuickTOC®purity: Precise continuous TOC analyses in low ppb ranges for pharmaceutical water

    QuickTOC®purity of LAR Process Analysers AG is an on-line measuring system for the detection of total organic carbon (TOC) in pharmaceutical water particularly for 'Highly Purified Water' (HPW) and 'Water for Injection' (WFI), according to USP Chapter 643 and EP 2.2.44. The TOC measuring system QuickTOC®purity was designed in cooperation with customers from the pharmaceutical industry in ...


    By LAR Process Analysers AG

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you