air flow calibration News
-
BGI Flow Calibrator Update
Latest firmware updates are now available for the range of BGI air flow calibrators. TetraCal, DeltaCal, HiVolCal and Challenger are now available with the latest entirely new firmware operating system called Primecal. It offers an outstanding selection of user selectable measurement parameters and it will be applied to all calibrators, present and past. It is accompanied by a completely new ...
-
F&J World Calibrator PC Interfaceable
F&J SPECIALTY PRODUCTS, INC. (F&J) an innovative manufacturer of air flow calibration systems for many industries has developed a new "High Flow" air flow calibration systems product line. Calibration systems are available for flow rates as high as 1000 m3/hr (600 CFM). The high flow calibration systems will be initially available on F&J's World Calibrator series (displayless and VFD ...
-
UKAS Air Flow Calibration Extension
The laboratory has successfully extended the UKAS Schedule for gas flow calibration services, covering 1 cc/min to 1280 l/sec (4300 cum/hr) and can accommodate flowmeter sizes up to 12 inch diameter. Facilities to offer both suction and blown air flow calibration with either reference transfer standard turbines or velocity profiled laser doppler anemometry. UKAS Laboratory 0604, accredited to ISO ...
-
September 2010 Laboratory Update
Laboratory updates for the air flow calibration facility, include the full service and calibration of BGI Flow Calibrators, Alicat Mass Flowmeters, AVL 442 Blowby Meters and ECM / Labcell Blow-by Meters. Updates for the liquid calibration facilities include the service and calibration of turbine flowmeters and HPLC flow ...
-
New advances in air sampling and air flow calibration instruments
F&J SPECIALTY PRODUCTS, INC. (F&J) has enhanced the usefulness of its “Digital Flowmeter” air sampling systems. F&J has implemented hardware and software modifications that enable a user to select either the reporting of (1) internationally recognized reference temperature (T) and pressure (P) conditions for gas volume values or (2) flow and volume values at local ambient conditions of barometric ...
-
Software for Automation of F&J Digital Air Sampler Calibrations with F&J Digital Air Flow Calibrators
F&J SPECIALTY PRODUCTS, INC. has developed software to enable users of F&J digital air sampling systems to automate the calibration verification process. This new software provides the following user benefits: (a) The printing of a calibration certificate tailored to the user’s organization. (b) Automatic correlation of the digital air sampler and an F&J digital airflow calibrator ...
-
Specialist Air Meter Repair and Calibration Services
Full service, repair and calibration for test bed air intake meters from the likes of Cussons VFAMs, Meriam Laminar Flowmeters and Furness Controls LFE. Modification of meters to improve linearity, span tube adjustment and flow damping snubbers to avoid engine pulsation effects. Update : Modification of Meriam and Furness laminar flowmeters to improve linearity now available. Large stock of ...
-
Sierra Mass Flowmeter Calibration
The laboratory can undertake cleaning and calibration of the Sierra Instruments range of gas flowmeters and mass flow controllers, these include the new Smart Trak 2, Smart Trak, Micro Trak, Top Trak, Side Trak and Max Trak. Air flow meter calibration is available from UKAS accredited to ISO 17025:2017 from 1 cc/min to 1300 l/min with further higher flow calibrations on our 2nd and 3rd ...
-
About Us - YCL 1996
Formed in 1996 with 2 employees, the company is now a world leading UKAS accredited calibration laboratory specialising in gas flow, fluid flow and air velocity calibration. Alongside the Calibration, sits our sister Testing Laboratory, providing test, development and durability services for the worlds automotive, aviation and motorsport ...
-
Casella launches game changer in Air Sampling Calibration - Flow Detective
Casella, air sampling, noise and vibration monitoring specialist introduces the Flow Detective™ air sampling pump calibrator… There is an estimated 18,000 new cases of breathing or lung problems a year caused or made worse by work, and an estimated 12,000 deaths from lung diseases linked to exposure at work[1]. It is an employer’s duty to protect the health of employees ...
By Casella
-
Precision in Air Sampling Calibration
Personal air sampling pumps are bodily-worn pumps used to sample airborne contaminants that can be damaging to health, controlling the flow of air to ensure a known volume of air is sampled. Monitoring for dust is usually achieved using such devices by sampling air onto a pre-weighed filter, which is then weighed after sampling and the dust concentration calculated. Monitoring for gases and ...
By Casella
-
ASTM D5337 - 11 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps
Most occupational exposure assessment methods require the use of personal sampling pumps to collect air samples at typical workplace sampling rates, with sampling volumes specified by (a) particular procedure(s). The precision and bias of these methods are directly affected by the precision and bias of the pumps used to measure the air ...
-
Alicat Releases New Flow Calibrator for Air Quality Samplers
Today Alicat’s Environmental Monitoring division released their new and improved FP-25 flow calibration kit. This calibration kit includes everything needed for auditing, calibrating, and leak checking air quality sampling instruments. What’s included: Portable FP-25 flow calibrator – with rechargeable battery External temperature probe Bluetooth antenna Micro-USB to USB ...
-
Sierra Instruments Releases New Gas Mixing Feature
Following in our commitment to drive innovation that creates value for customers, we are excited to announce the new gas mixing software package, now included with every QuadraTherm® 640i/780i thermal mass flow meter on a beta trial basis. The “qMix™” software package is a unique feature of the Smart Interface Program (SIP) unlike anything available on the market for ...
-
Alicat Flow Calibration Services in the UK
Service and calibration is now available for the Alicat range of gas mass flowmeters. Flow calibrations can be undertaken on air, from 1 sccm upto 1000 slpm. 22/09/2015 : Calibration can now be undertaken on Alicat Mass Flow Controllers (MFC) aswell as the mass flowmeter range (MFM), for all M, Mw and MQ series gas flowmeters, covering 1 cc/min to 1000 ...
-
CE Compliant Products - Air Sampling and Airflow Calibration Instruments
Untitled Document F&J SPECIALTY PRODUCTS, INC. has obtained confirmation from a Nationally Recognized Testing Laboratory (NRTL) that a large segment of its air sampling and airflow calibration instruments are in conformity with the applicable CE directives. The entire digital flowmeter product line has been tested to be in conformity with IEC 61010-1. Please click here to refer to ...
-
ASTM E1827 - 11 standard test methods for determining airtightness of buildings using an orifice blower door
Airtightness—Building airtightness is one factor that affects building air change rates under normal conditions of weather and building operation. These air change rates account for a significant portion of the space-conditioning load and affect occupant comfort, indoor air quality, and building durability. These test ...
-
Pumps Vs Real Time Measurements; no time like the present
Hands up to all those who can remember a time before the personal air sampler (PAS)? Not many I guess, but then they only do commerically date back to the early 1960's in Europe and the US, at a time when the American Industrial Hygiene Association (AIHA) only had a few hundred members. The history of personal air sampling instrumentation The personal sampling pump was developed under ...
By Casella
-
CIH Equipment Company Expands ISO 17025:2005 Accredited Services
CIH Equipment Company, an independent calibration laboratory specializing in Industrial Hygiene/Environmental Health and Safety Industry and headquartered in Clearwater, FL, announces the expansion of its ISO/IEC17025:2005 accredited services. This allows CIH Equipment Company to provide expanded accredited calibration services. CIH is now home to the only ISO 17025 accredited dust generation ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you