Air Modeling Software News on Environmental XPRT

Real Time Air Dispersion Modelling

WKC reach a major milestone in the implementation of a facility-wide REAL-TIME AIR DISPERSION MODELLING system at a major refinery in the Sultanate of Oman; WKC has successfully combined its air quality consultancy experience with a sophisticated real-time modelling software package to provide a powerful tool in the management of impacts to ambient air quality. ...

Mar. 4, 2016

By WKC Group

BREEZE® is the market-leading air dispersion modeling software used by environmental professionals around the world

On December 20, 2016, the U.S. EPA Administrator signed a final rule entitled Revisions to the Guideline on Air Quality Models: Enhancements to the AERMOD Dispersion Modeling System and Incorporation of Approaches to Address Ozone and Fine Particulate Matter. The rule provides EPA-recommended models and other techniques as well as guidance for their use in predicting ambient concentrations of air ...

Mar. 3, 2017

By BREEZE Software, Data and Services / Trinity Consultants

Air Pollutant Emission-Rate Software for Industrial Sources is Now Available

The need for accurate methods of quantifying industrial-source emission rates of methane and other greenhouse gases (GHGs), as well as other air pollutants, has never been greater, both domestically and abroad. Today, Minnich and Scotto, Inc. (www.msiair.net) announces the availability of e-Calc© – an emissions-calculation software package to yield ...

Feb. 4, 2016

By Minnich and Scotto, Inc.

Air pollution monitoring model takes off in Australia

“The Air Pollution Model (TAPM) increases our ability to pinpoint pollutant behaviour in a wider range of atmospheric conditions,” says CSIRO’s Dr Peter Hurley. ”Over the coming years the new model will continue to fill a gap between simple air pollution dispersion models and the much more complex earth system models such as The Australian Community Climate and Earth-System Simulator (ACCESS).” ...

Dec. 3, 2008

By CSIRO, the Commonwealth Scientific and Industrial Research Organisation

Innovyze software training

Innovyze has launched training offerings for its water and wastewater hydraulic and asset performance modelling software. Regularly scheduled training classes will be held in California and Colorado in the United States and in Wallingford, United Kingdom. Innovyze’s IACET-accredited courses cover the basic functionality of all ...

Apr. 27, 2011

Lohmeyer implements the dispersion model PROKAS to software product SELMA GIS

SELMAGIS is a system for Air Pollution Modelling and Visualization as an extension in ArcGIS 9.1 - 9.3, 10. SELMAGIS offers a unique graphical user interface to work with different dispersion models. There are implemented yet AUSTAL2000, OML-Highway, MEMO and MARS/MUSE and now PROKAS. PROKAS is able to calculate traffic induced air pollution and includes ...

Jan. 4, 2013

By Lohmeyer GmbH & Co. KG

Vacancy for a Scientific Software Developer at CERC

Headline CERC is looking to recruit a bright graduate or post-doc to join our team of 12 software developers and air quality scientists in Cambridge. Why you'd like to join us CERC develops, supports and promotes environmental software used in commercial and research applications worldwide, including the widely-used Atmospheric Dispersion Modelling System, ...

Jul. 9, 2015

By Cambridge Environmental Research Consultants (CERC)

Air & thermal coupling

SVOffice 2009 Professional Coupling The Professional version of each SVOffice 2009 software package gives you the capability to fully couple your model with other packages. Coupling allows the solution of multiple processes within the context of a single modeling problem. Click here to learn more about all available SVOffice 2009 software coupling options. Borehole Thermal ...

Aug. 24, 2010

By SoilVision Systems Ltd.

Free toolkit for air quality model evaluation now available

The Myair Toolkit for Model Evaluation is now available to download free from the CERC website. The Myair Toolkit enables you to assess the performance of an air quality model against in situ observed data and produces a range of statistics and attractive report-ready graphs. As well as analysis of predicted ...

Jun. 10, 2013

By Cambridge Environmental Research Consultants (CERC)

Air pollution modelling could help predict algal blooms

Models that predict how nitrogen from the air is deposited in the sea could be useful in predicting algal blooms. Based on the knowledge that excess nitrogen increases algal growth rates, researchers simulated nitrogen deposition in the North Sea and suggested that, using predicted weather data, it might be possible to adapt this approach to predict algal blooms. Algae populations are kept under ...

Mar. 19, 2015

By European Commission, Environment DG

Volume 4 of the `Air Quality Modeling` book series published

Air Quality Modeling: Theories, Methodologies, Computational Techniques, and Available Databases and Software – Volume IV is the fourth and last volume of a comprehensive book series on the subject of air pollution and computer modeling of air quality phenomena. The book series is available both on CD-ROM (see below) and as a bound textbook (search: OTHP-28). The book series is published by ...

Sep. 19, 2011

By IVU Umwelt GmbH

The University of Belgrade selects BREEZE software for course instruction

The University of Belgrade’s Department of Mining and Geology selected BREEZE® Software as the preferred air dispersion modeling software for use in its Air Pollution undergraduate course. The course addresses the basic concepts of air pollution in general and focuses on specific air quality issues as it relates to the mining industry. The software is used to predict concentrations of air ...

Oct. 16, 2009

By BREEZE Software, Data and Services / Trinity Consultants

Air & Waste Management Association issues call for abstracts for air quality models symposium

The Air & Waste Management Association (A&WMA) has issued a call for abstracts for “Guideline on Air Quality Models: Next Generation of Models,” a symposium to be held October 26 – 30, 2009, in Raleigh, NC. This symposium will provide a technical forum for environmental professionals including source owners, regulatory agencies, and consultants to discuss proposed revisions to the U.S. ...

Jan. 21, 2009

By Air & Waste Management Association (A&WMA)

CERC Model Evaluation Toolkit Version 4.0 for the evaluation of air quality forecasting models is now available

CERC’s Model Evaluation Toolkit is a free toolkit for the evaluation of local and regional air quality forecasting models. It uses openair tools to create report-ready graphs and statistics, assesses model performance in terms of ...

Feb. 10, 2016

By Cambridge Environmental Research Consultants (CERC)

Cleaner air in China

In the last 20 years, NILU has been actively involved in research and cooperation projects in China. Current activities include the coordination of two projects to support SO2 emission trading in the Shanxi province and to establish an up-to-date air quality (AQ) information system for the Hubei province. Both initiatives are funded by EuropeAid, EU – China Environmental Governance ...

May 27, 2013

By NILU - The Norwegian Institute for Air Research

Are TGFs hazardous to air travelers?

Instruments scanning outer space for cataclysmic explosions called gamma-ray bursts are detecting intense flashes of gamma-ray energy right here in the friendly skies of Earth. These terrestrial gamma-ray flashes, or TGFs, blast through thunderstorms close to the altitude where commercial airliners fly. In fact, they could be too close for comfort. In a recent study,* scientists estimated that ...

Feb. 10, 2010

By National Aeronautics and Space Administration - NASA

BREEZE Software Introduces Redesigned AERMOD Start Page

BREEZE®, the market-leading air dispersion modeling software used by environmental professionals around the world, released a new version of its AERMOD air dispersion modeling software. This release unveils a new start page design that will provide users with a wealth of resources in an easy-to-find layout, as well as a number of critical bug fixes. ...

Dec. 16, 2014

By BREEZE Software, Data and Services / Trinity Consultants

Software Updates x2: BREEZE CALPUFF and 3D Analyst

We've been hard at work to bring you software updates for BREEZE CALPUFF and 3D Analyst. The latest versions of these software, which are available today, are packed with new, resourceful features that will make air quality modeling easier for you, help you minimize model setup time and enable you ...

Aug. 31, 2016

By BREEZE Software, Data and Services / Trinity Consultants

BREEZE Releases Function-Enhancing Software Update for Emergency Response and Planning Modeling System

BREEZE®, the market-leading air dispersion modeling software used by environmental professionals around the world, recently released a new version of its Incident Analyst modeling software. First responders and risk management planning teams use BREEZE Incident Analyst to evaluate worst-case and alternative scenarios for chemical releases, explosions, and fire threats. Industrial ...

Jul. 10, 2013

By BREEZE Software, Data and Services / Trinity Consultants

Innovyze announces comprehensive software training schedule

Innovyze, a leading global innovator of wet infrastructure modeling and simulation software and technologies, today debuted new training offerings for its leading line of water and wastewater hydraulic and asset performance modeling software. Regularly scheduled training classes will be held in California and Colorado in the United States and in Wallingford, United Kingdom. The expanded offerings ...

Apr. 26, 2011

By Innovyze

Subscribe to our eBulletins

Add Supplier Profile