aluminium separation News

  • Aluminium recycling

    Aluminium recycling is one of the most interesting topics at the moment, as aluminium is a highly sought-after raw material, just like steel. If it is processed properly, there is no limit to the reuse of aluminium. Recycled aluminium will not lose its quality through recycling as long as material of the highest possible purity is used. Currently, aluminium is shredded by means of shear balers to ...


    By UNTHA Shredding Technology

  • Innovative sorting of Aluminium and Zorba

    REDWAVE XRF new sorting possibillities for the aluminium recycling industry Introduction There are no limits set to the recycling of metals, they can be reused without limitation and to one hundred percent. Of course, metals have to be separated from non-metal impurities and different metals have to be sorted in pure fractions to be able to use them as secondary ...

  • Aluminium and copper balls made of highly sensitive data

    Today, these data are recorded digitally on computers, hard drives, digital recordings, floppy disks, USB flash drives, etc. When they have been used, they are often just thrown away. However the sensitive data that may be located on it could be reproduced at any time again. Only the destruction of the storage media can prevent this. Erdwich has developed a machine technology that simultaneously ...

  • EU aluminium beverage can recycling hits 63%

    Aluminium drinks can recycling has increased to 63% across the EU27, data from the European Aluminium Association (EAA) has found. During the past two years, the recycling rate for aluminium cans has risen by 5.4%, going from 57.7% in 2006, to 61.8% in 2007 and reaching 63.1% in 2009. Germany recycles the most cans, with a rate of 96% by using the Green Dot scheme, which means the product ...

  • Mitsubishi and Tetronics to tackle hazardous waste from aluminium industry

    A new collaboration partnership will see Mitsubishi Corporation and Tetronics working together to treat the problematic Spent PotLiner (SPL) hazardous waste that is routinely generated during the manufacturing of aluminium. Tetronics Ltd., a leader in the supply of Direct Current (DC) plasma waste recovery plants for the treatment of hazardous waste and metal recovery, announced the signing of a ...

  • REDWAVE XRF - new sorting possibilities for the Metal and Aluminium Recycling Industry

    The sorting system REDWAVE XRF was initially used in the field of glass sorting, more precisely for the separation of heat-resistant and leaded glass from the waste glass cullet. Soon it became apparent that the fields of application go far beyond the glass sector. The use of this innovative technology together with the development of a new machine design set new standards in the metal sorting, ...

  • SAPA Profiles UK new temperature measurement equipment for aluminium production efficiency

    SAPA Profiles UK has implemented AMETEK Land’s new SPOT AL EQS (SPOT Aluminium Extrusion, Quench and Strip) pyrometers at its aluminium extrusion plant in Tibshelf, Derbyshire and is reaping major efficiencies and performance benefits by accurately measuring temperature of low and variable emissivity aluminium. This innovative new SPOT AL EQS ...


    By AMETEK Land

  • Rössl & Duso launches its new line of shredders for Aluminium scrap

    Rössl & Duso S.p.a. has a long tradition on mechanical machining of large industrial parts in forged, cast or sheet steel, like turbine casings, naval shafts, rings, etc. for the power, oil/chemical, nuclear and naval industries. The works are carried out exclusively with CNC machines. The company was created in 1970 and is part of the medium-size manufacturing industries of the Veneto region ...


    By Rossl & Duso Group S.p.A

  • Green light for Eddy Current Separator

    Those Eddy Current separators that were expensive and of limited possibilities once, now have become a wise choice. Obtaining metal sorting machinery engineers seem to transcend the traditional thinking, presenting more and more intelligent and capable machines. COGELME, the Italian manufacturer of waste recycling equipment, mainly of ferrous and non-ferrous metals separators, has studied ...

  • Non-ferrous separator for recycled wood

    The recently initiated project cooperation between Goudsmit Magnetic Systems B.V. in Waalre and Van Bemmel Machine Import B.V. in IJsselstein with Hector van Moer in Melsele/Beveren in Belgium, ensures that all non-ferrous metals located in the wood chips are completely removed from the processed B-wood fraction. It involves mainly shredded aluminium components but also non-ferrous metals such as ...

  • Redwave Metal Days! The best opportunity to stay on top of new developments in the field of metal/aluminium recycling!

    Metal and aluminium recycling is moving ever more into the spotlight as companies around the world seek to incorporate more secondary material into their materials flow sheet and product lines. Metal scrap offers many economic benefits over prime metal. This event features international speeches of different sectors in the metal and aluminium recycling industry and latest innovations. ...

  • Nederman receives order for over SEK 30 million (€3.3’’) from Stena Aluminium

    The order is for new investments in Stena Aluminium’s smelter in Älmhult, Sweden. Nederman will supply the plant with solutions for the filtration of the fumes generated in the smelting of returned aluminium products. “Our operations are important especially for the environment, but there is also a growing ...


    By Nederman

  • TOMRA´s latest automated LIBS sorting technology is making aluminium recycling worthwhile

    Coupled with its market-leading X-TRACT, TOMRA Sorting will launch its LIBS technology, at ALUMINIUM 2016, in Düsseldorf, Germany, between 29 November and 01 December, 2016. Conveniently situated in the exhibition’s Recycling Pavilion (Hall 11), TOMRA Sorting can be found at Stand 54 where its ALUMINIUM 2016 team will be on hand each day ...


    By TOMRA Sorting (TITECH)

  • More Magnetic Separation to Achieve EU Targets?

    The UK recycling publication MRW featured a news article entitled ‘Metal targets matter’ in the 11 October 2014 issue. The article stated that Alupro, the UK’s aluminium packaging industry association, expressed concerns at suggested EU packaging recycling targets for 2030. Alupro quoted recycling rates for aluminium packaging as now being over 43% but also added “we ...


  • Eriez Demonstrates Nonferrous Fines Separation at RWM

    Eriez Magnetics Europe Ltd will be present at RWM 2014 held between16th and 18th of September at the NEC, Birmingham, UK and demonstrate new developments with its range of eddy current separators (ECS) RevX-E. This advanced equipment will enable waste processors to achieve an extremely high level separation of nonferrous material from waste material fines. Eriez’ eddy current separator ...


    By Eriez Magnetics Europe Ltd

  • Eddy current separator sales reach all time high

    Recent increases in the value of aluminium have put the sales of Master Magnets Eddy Current Separators at an all time high. The Mastermag factory has become extremely busy over the last month as the production team have been working tremendously hard to handle the recent surge in ECS output. The amount of Eddy Current Separator sales in the last month accounts for more than 26% of the total ECS ...


    By Master Magnets Ltd

  • Premier of the new eddy current separator CanMaster - The master for coarse material at STEINERT

    Ecomondo in Rimini/Italy and Pollutec in Lyon/France were the venues where Steinert’s new eddy current separator—the CanMaster—was first presented to the world. The reception it received was great! “At last”, said the visitors, “no more compromises. The STEINERT technology is finally available at a good entry-level price'. The CanMaster gets its name because its target is coarse pieces of ...

  • Metal Separation in the Processing of Secondary Fuels - the Extraction of Potential Recycables and Equipment Protection

    The treatment of solid domestic and commercial refuse and the extraction of secondary fuels from these materials will be subject to stricter regulations due to new landfill regulations coming into force. In this way, it will be possible to further increase the recycling quotas and minimize bottlenecks in processing capacity. There are grounds for believing that the competition between ...

  • Increasingly stricter quality requirements for suppliers - non-ferrous separator for recycled wood

    The recently initiated project cooperation between Goudsmit Magnetic Systems B.V. in Waalre and Van Bemmel Machine Import B.V. in IJsselstein with Hector van Moer in Melsele/Beveren in Belgium, ensures that all non-ferrous metals located in the wood chips are completely removed from the processed B-wood fraction.  It involves mainly shredded aluminium components but also non-ferrous metals ...


    By Goudsmit Magnetic Systems BV

  • ARN Invests in Further Expansion with Swiss Delamination and Separation Plant

    ARN Recycling BV is the first company to operate the new CCM20RT delamination mill produced by swissRTec.  The CCM20RT is based around the same design as its predecessors, the CCM10 and CCM15RT, however it makes a big step forward in power and size. ARN, an experienced processor of ASR in the Netherlands, is ...


    By Auto Recycling Nederland

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you