aluminium separation plant News

  • Innovative sorting of Aluminium and Zorba

    REDWAVE XRF new sorting possibillities for the aluminium recycling industry Introduction There are no limits set to the recycling of metals, they can be reused without limitation and to one hundred percent. Of course, metals have to be separated from non-metal impurities and different metals have to be sorted in pure fractions to be able to use them as secondary ...

  • Aluminium and copper balls made of highly sensitive data

    Today, these data are recorded digitally on computers, hard drives, digital recordings, floppy disks, USB flash drives, etc. When they have been used, they are often just thrown away. However the sensitive data that may be located on it could be reproduced at any time again. Only the destruction of the storage media can prevent this. Erdwich has developed a machine technology that simultaneously ...

  • Mitsubishi and Tetronics to tackle hazardous waste from aluminium industry

    A new collaboration partnership will see Mitsubishi Corporation and Tetronics working together to treat the problematic Spent PotLiner (SPL) hazardous waste that is routinely generated during the manufacturing of aluminium. Tetronics Ltd., a leader in the supply of Direct Current (DC) plasma waste recovery plants for the treatment of hazardous waste and metal recovery, announced the signing of a ...

  • SAPA Profiles UK new temperature measurement equipment for aluminium production efficiency

    SAPA Profiles UK has implemented AMETEK Land’s new SPOT AL EQS (SPOT Aluminium Extrusion, Quench and Strip) pyrometers at its aluminium extrusion plant in Tibshelf, Derbyshire and is reaping major efficiencies and performance benefits by accurately measuring temperature of low and variable emissivity aluminium. This innovative new SPOT AL EQS ...


    By AMETEK Land

  • ARN Invests in Further Expansion with Swiss Delamination and Separation Plant

    ARN Recycling BV is the first company to operate the new CCM20RT delamination mill produced by swissRTec.  The CCM20RT is based around the same design as its predecessors, the CCM10 and CCM15RT, however it makes a big step forward in power and size. ARN, an experienced processor of ASR in the Netherlands, is ...


    By Auto Recycling Nederland

  • Non-ferrous separator for recycled wood

    The recently initiated project cooperation between Goudsmit Magnetic Systems B.V. in Waalre and Van Bemmel Machine Import B.V. in IJsselstein with Hector van Moer in Melsele/Beveren in Belgium, ensures that all non-ferrous metals located in the wood chips are completely removed from the processed B-wood fraction. It involves mainly shredded aluminium components but also non-ferrous metals such as ...

  • Nederman receives order for over SEK 30 million (€3.3’’) from Stena Aluminium

    The order is for new investments in Stena Aluminium’s smelter in Älmhult, Sweden. Nederman will supply the plant with solutions for the filtration of the fumes generated in the smelting of returned aluminium products. “Our operations are important especially for the environment, but there is also a growing ...


    By Nederman

  • Metal Separation in the Processing of Secondary Fuels - the Extraction of Potential Recycables and Equipment Protection

    The treatment of solid domestic and commercial refuse and the extraction of secondary fuels from these materials will be subject to stricter regulations due to new landfill regulations coming into force. In this way, it will be possible to further increase the recycling quotas and minimize bottlenecks in processing capacity. There are grounds for believing that the competition between ...

  • Increasingly stricter quality requirements for suppliers - non-ferrous separator for recycled wood

    The recently initiated project cooperation between Goudsmit Magnetic Systems B.V. in Waalre and Van Bemmel Machine Import B.V. in IJsselstein with Hector van Moer in Melsele/Beveren in Belgium, ensures that all non-ferrous metals located in the wood chips are completely removed from the processed B-wood fraction.  It involves mainly shredded aluminium components but also non-ferrous metals ...


    By Goudsmit Magnetic Systems BV

  • Eriez new eccentric rotor for RevX-E® eddy current separator

    Eriez, world leading authority in magnetic separation, announce the release of a new rotor design for its RevX-E® eddy current separator, Eriez’ most recent addition to its extensive line of recycling equipment. The new design of the eccentric magnetic rotor brings the greatest recovery of valuable non ferrous metals for application in automobile shredding, glass cullet, plastics, ...


    By Eriez Magnetics Europe Ltd

  • New Luton plant for laminate packaging recycling

    Waste firms or producers looking to recycle their laminate packaging waste such as drink cartons, toothpaste tubes and coffee sachets can now test this at a new engineering facility in Luton. Privately funded environmental technology solutions firm Enval has opened the new pilot plant in the town. The company, originally a spin-out from the Chemical Engineering Department at the University of ...

  • Novelis Commissions Expanded Latchford Recycling Plant

    Novelis, the world leader in aluminium rolling and recycling, announced today the commissioning of its expanded recycling plant in Latchford, Warrington in the UK. With an investment of approximately € 13.6 million (£6 million), the plant’s capacity will increase by over a third and becomes Europe’s largest closed-loop recycling operation for automotive aluminium rolled ...


    By Novelis Inc.

  • PET-Recycling Plant at PFR Nord GmbH

    Operator of the facility: The Mensing Group of Companies in Hohenwestedt (Germany) invests almost € 10 million in the construction of a new PET recycling plant. The construction of the recycling plant is associated with the formation of PFR Nord GmbH in Hohenwestedt. About 30 new jobs have resulted there. On the whole, Mensing Group, which also includes AFA Nord GmbH and TM Recycling ...

  • UK firm exports a complete recycling plant to China

    The UK company, Master Magnets Ltd, have recently designed, manufactured and delivered an Eddy Current Separator plant complete with a vibratory feeder and drum magnet to a major steel recycler in China. Ghangzhou Asia Steel Ltd are one of the main steel recyclers in China, based in the region of Whampoa. They have had great success in the metal recycling market, and a few years ago they ...


    By Master Magnets Ltd

  • SITA UK installs Eriez Magnetics ecs in its new wood recycling plants

    Eriez Magnetics, the leading authority in magnetic separation based in Caerphilly, South Wales has installed a magnetic separation system for the removal of non-ferrous materials at SITA UK's new wood recycling plants in Preston, Ashington and Perth. SITA UK is the only major recycling and resource management company to offer a UK wide collection service for waste wood. Its specialist wood ...

  • The Masters ‘Sort Out’ BMW

    Master Magnets Ltd custom built and designed a swarf separator for one of the world’s largest car manufacturers. BMW had the problem of obtaining clean aluminium from left over swarf at their engine manufacturing plant at Castle Bromwich in the Midlands BMW. BMW had the problem of obtaining clean aluminium from left over swarf at their engine manufacturing plant at Castle Bromwich in the ...


    By Master Magnets Ltd

  • Unique recycling firm receives big investment

    Enval, the first packaging recycling company to allow complete recycling of laminate packaging waste, has obtained significant investment from the East of England Co-Investment Fund. Laminate packaging is a material made up from tightly-packed layers of aluminium and plastic that are hard to separate, such as a drink carton. The spinout company of the ...

  • Master Magnets maximise ECOs’ wood chip profits

    Major UK composting company ECO Sustainable Solutions recently contacted Master Magnets Ltd with a metal contamination problem, which if solved, would significantly increase the value of their wood chip.ECOs’ wood chip is supplied for many different uses including playgrounds, pathways, gardens and parks. It is for this reason that the 50mm wood chip is required to be a completely metal-free end ...


    By Master Magnets Ltd

  • New Tasks for the QZ: Slag Recycling.

    Having been well established as an especially fast-operating and efficient plant technology in WEEE and refrigerator processing for a long time, the QZ Querstromzerspaner is currently proving its special qualities in a new field of application: In the recycling of slag scrap from combustion plants (garbage incineration etc.). The Querstromzerspaner does notoperate in its classic application as ...


    By ANDRITZ MeWa GmbH

  • Ametek Land Launches Latest Generation

    AMETEK Land, the leading industrial infrared non-contact temperature measurement specialist, has developed an innovative new pyrometer that provides high accuracy and a three-in-one capability specifically for aluminium applications, including extrusion press exit, extrusion press quench zone, and aluminium strip mills. The SPOT AL ...


    By AMETEK

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you