anemometer measurement News

  • Climate Change: Some winds decreasing across US

    Declining wind speeds in parts of the United States could impact more than the wind power industry, say Iowa State University climate researchers. Three Iowa State researchers contributed their expertise in modeling North America's climate to a study to be published in the Journal of Geophysical Research – Atmospheres. The study – led by Sara C. Pryor, a professor of atmospheric science at ...


    By ScienceDaily

  • Labor safety threatened by crane collapses

    A tower crane collapsed the morning of January 23, 2019, when it was working at a worksite in Hunan Province, China. Two people died on the spot while two others died soon after they arrived at the hospital. The falling crane also struck several other construction workers. On May 19, another accident happened in Israel. In one construction site, drivers were lifting some heavy stuff. However, ...


    By Scarlet Tech Ltd.

  • ASTM D5096 - 02(2011) standard test method for determining the performance of a cup anemometer or propeller anemometer

    This test method will provide a standard for comparison of rotating type anemometers, specifically cup anemometers and propeller anemometers, of different types. Specifications by regulatory agencies (4-7) and industrial societies have specified performance values. This standard provides an unambiguous method for measuring Starting Threshold, Distance Constant, Transfer Function, and Off-Axis ...


    By ASTM International

  • ComfortSense Mini – Compact and Robust single point anemometer for draught and ventilation measurements

    The ComfortSense Mini is a compact and robust single point anemometer that covers a wide range of applications within indoor climate measurements. Draught rate can be measured according to the ISO 7730 standard. For automotive applications, ComfortSense Mini with a 54T34 Draught probe Manikin can be built into thermal manikins to measure the airflow at a certain point of a body. The 54T33 Draught ...


    By Dantec Dynamics

  • UKAS Air Velocity Calibration

    The UK's best accuracy accredited air velocity calibration instruments across 10 - 80 m/s is based on the south coast of England. The facility has a total coverage range of 0.01 m/s to 100 m/s. UKAS accredited calibrations from 0.05 to 80 m/s for thermal anemometers, pitot tubes and vane anemometers. With a multi-variable tunnel concept, the optimum tunnel size can be used to minimise ...


    By Young Calibration Ltd

  • ASTM E2029 - 11 standard test method for volumetric and mass flow rate measurement in a duct using tracer gas dilution

    The method presented here is a field method that may be used to determine mass and volume flow rates in ducts where flow conditions may be irregular and nonuniform. The gas flowing in the duct is considered to be an ideal gas. The method may be especially useful in those locations where conventional pitot tube or ...


    By ASTM International

  • UKAS Air Velocity Calibration Update Jan 2019

    Anemometer Calibration, Latest news for customers requiring ISO 17025 UKAS accredited calibration with our recently improved measurement calibration uncertainty for all types of air velocity, wind speed or anemometer instruments. Cup Anemometer, being one of the oldest types of anemometer, commonly referred to as a rotating cup anemometer, as the wind blows, the cup rotates and outputs a ...


    By Young Calibration Ltd

  • New cutting-edge Light and Air Velocity Meters unveiled by Casella CEL

    Casella CEL has announced that it has expanded its extensive portfolio of high-quality environmental and occupational monitoring and measuring instruments with the addition of a range of advanced Digital Light Meters and  ...


    By Casella

  • ASTM D5527 - 00(2011) standard practices for measuring surface wind and temperature by Acoustic Means

    Sonic anemometer/thermometers are used to measure turbulent components of the atmosphere except for confined areas and very close to the ground. These practices apply to the use of these instruments for field measurement of the wind, sonic temperature, and atmospheric turbulence components. The quasi-instantaneous velocity component measurements are averaged over user-selected sampling times ...


    By ASTM International

  • TSI Incorporated Launches a Newly Redesigned Test Ventilation and Indoor Air Quality Line of Products

    TSI Incorporated is proud to launch a newly redesigned line of anemometers and indoor air quality instruments.  The new products provide highly accurate, fast, and easy to use instrumentation for serving building service contractors, commissioning specialists, facility engineers, and research professionals.  The new thermal anemometers come with intuitive operation and a large display ...


    By TSI Incorporated

  • Technika Expands Anemometer Line with NEW Environmental Anemometer Pens

    Scottsdale, AZ September 21, 2007 - Technika, a distributor of environmental measurement instruments, announced two new Anemometer Pens (850021 & 850022). You can now measure multiple environmental parameters with a single self-contained pen-style meter. Ideal for field studies, HVAC, environmental protection and exhaust monitoring for fume / paint hoods to name a few industry applications. ...


    By Sper Scientific

  • Delta Ohm 2 axes meteorologic anemometer HD52.3 ( with temperature, humidity, pressure, solar radiation)

    The instruments of the series HD52.3D… are 2 axes ultrasonic static anemometers for measuring: • Wind speed and direction, U-V Cartesian components of wind speed, • Relative Humidity and Temperature (option, code “17”), • Diffuse Solar Radiation (option, code “P”), • Barometric pressure (option, code “4”).All models are ...

  • Casella CEL shows new sound level meter at IOSH 2011

    Casella CEL is proud to announce it will be exhibiting a new sound level meter for occupational and environmental monitoring at IOSH 2011. Major investment in groundbreaking technology has enabled Casella to launch its CEL-630 Series of exciting new sound level meters that can be effortlessly used in an enormous range of noise monitoring situations in both the environment and/or the workplace. ...


    By Casella

  • Casella CEL Shows New Sound Level Meter at IOSH 2011

    Casella CEL is proud to announce it will be exhibiting a new sound level meter for occupational and environmental monitoring at IOSH 2011. Major investment in groundbreaking technology has enabled Casella to launch its CEL-630 Series of exciting new sound level meters that can be ...


    By Casella

  • New Casella microsite provides quick answers to workplace safety monitoring issues in key industry sectors

    www.mycasellasolutions.com aimed at pharmaceutical, mining, chemical and petrochemical businesses  Leading global specialist in industrial hygiene, occupational health and environmental monitoring equipment, Casella CEL (www.casellameasurement.com; 01234 844100), has ...


    By Casella

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you