atex certification News

  • New ATEX certificates

    Progressing cavity pumps, peristaltic pumps, and macerators are also certified for use in dusty atmospheres, the ALLTRIMM series is also ATEX compliant. For many years progressing cavity pumps, peristaltic pumps, and mac-erators manufactured by ALLWEILER AG have fulfilled the requirements for use in potentially explosive gaseous atmospheres. But now - since mid-2008 -they are also certified for ...


    By ALLWEILER GmbH

  • DESMI Ocean Guard receives ATEX certification

    DESMI Ocean Guard A/S announces that notified body DEKRA EXAM GmbH on 9th June 2016 issued ATEX certificate for its RayClean-EX ballast water treatment system. This means the system can now be installed directly in hazardous areas onboard tanker vessels. DESMI Ocean Guard A/S announces that notified body DEKRA EXAM GmbH on 9th June 2016 issued ATEX certificate for its ...


    By DESMI A/S

  • Allweiler Pumps approved for explosive atmospheres. New ATEX certificate for dust

    For many years progressing cavity pumps, peristaltic pumps, and macerators manufactured by Allweiler AG have fulfilled the requirements for use in potentially explosive gaseous atmospheres when used properly. But now – since end 2008 – they are also certified for use in dust-laden explosive atmospheres. The ATEX certificate confirms that Allweiler pumps now fully comply with EU directive 94/9/EC ...


    By ALLWEILER GmbH

  • P S Analytical achieves ISO 9001:2000 and ATEX Certification

    Following an assessment by an independent body, P S Analytical has been awarded ISO 9001 certification.  This certification has only been achieved by about 5% of UK businesses and this prestigious award is supported by the Government and recognised worldwide. Said a delighted Prof Peter Stockwell “We have always been proud of the service we offer our clients and the way that we conduct our ...


    By P S Analytical Limited

  • TSI Announces ATEX Certification for SIDEPAK TM Exposure Instruments

    TSI has recently achieved ATEX approval for SIDEPAK Personal Sampling Pump Models SP330, SP530 and SP730 and the SIDEPAK AM510 Personal Aerosol Monitor. The pumps and monitor are certified to ATEX Directive 94/9/EC, which is mandatory for equipment put into service within the European Union since July 2003. This ATEX certification, along with the previously achieved CE mark, qualifies these ...


    By TSI Incorporated

  • P S Analytical Online Mercury in Natural Gas Analyser Achieves ATEX Certification

    As part of its ongoing product development P S Analytical has recently received the ATEX EC-Type certification permitting our online mercury measurement system for natural gas to be installed in Category 2 IIC T4 designated areas. The procedure used for the measurement of mercury by atomic fluorescence basically follow the ASTM 6350-98 and ISO 6978-2 procedure and the PSA 10.670 is specifically ...


    By P S Analytical Limited

  • Polychem Systems, division of Brentwood Industries, Inc., receives ATEX certification in July 2011

    According to the European Directive 94/9/EC, an ATEX Certificate is required for products sold and traded within the European Union (EU) that may be used in a potentially explosive environment created by the presence of flammable gas, vapor, mist or clouds of combustible dust. Polychem Systems, Division of Brentwood Industries, Inc., has received ATEX certification for the components that ...


    By Brentwood Industries, Inc.

  • Crowcon`s Vortex FP Flameproof Gas and Fire Detection Control Panel has ATEX Certification

    -ATEX certification allows use in Zone 1 and 2 hazardous areas- Crowcon’s highly successful Vortex range of multi-channel gas and fire detection control panels has been extended to include an ATEX* certified Exd Flameproof version, the Vortex FP, which can be used in Zone 1 and Zone 2 hazardous areas. Photo: ...

  • Chromatotec® certified ATEX for zone 1 & 2

    Since 2009, Chromatotec® proposes a version of its MEDOR® analyzer in Exp cabinet for hazardous areas. This solution dedicated for monitoring and online analysis of sulfurs and odorous compounds in natural gas today received the ATEX certification for zone 1. MEDOR® was already certified for zone 2 since 2014. The ATEX directive consists of two EU directives describing what equipment ...


    By Chromatotec Group

  • ReactIR 45P HL ATEX approved for global hazardous use

    To best serve customers operating in general purpose (GP) hazardous environments worldwide, METTLER TOLEDO is pleased to announce that the ReactIR 45P HL is now approved for use in both C1D1 and ATEX locations. Compliant with safety standards worldwide, customers need only one model to gain ReactIR 45P’s safety- and compliance-enhancing abilities in sensitive chemical process scale-up. ...


    By Mettler - Toledo Int. Inc

  • Det-Tronics gt3000 toxic gas detector family receives atex approval

    Minneapolis, MN (May 4, 2010) — Detector Electronics Corporation (Det-Tronics) GT3000 Toxic Gas Detectors have received ATEX hazardous location and performance certification (http://gt3000.det-tronics.com). In addition, GT3000 Toxic Gas Detectors are FM, CSA, CE, and IECEx certified and have earned the IP66 rating. Det-Tronics is part of UTC Fire & Security, ...

  • Can you put theory into practice when it comes to ATEX?

    21st to 22nd February 2007, National Motorcycle Museum, Birmingham HazardEx International 2007 – the only event to offer indispensable advice from the top authorities in the hazardous area industry, when complying with the ATEX, DSEAR + IECEx requirements – has announced it’s comprehensive two day conference programme to help you to put theory into practice with regards to the new regulations. ...


    By IML Group PLC

  • ReactIR 45P HL ATEX Approved for Global Hazardous Use

    To best serve customers operating in general purpose (GP) hazardous environments worldwide, METTLER TOLEDO is pleased to announce that ReactIR 45P HL (Hazardous Location) is now approved for use in both C1D1 and ATEX locations. Compliant with worldwide safety standards, ReactIR 45P provides compliance-enhancing abilities in sensitive chemical process scale-up. METTLER TOLEDO is pleased to ...


    By Mettler - Toledo Int. Inc

  • Casella CEL`s TUFF range gains ATEX approval

    Casella CEL's ground-breaking TUFF range of Personal Air Sampling Pumps, the most rugged pump for use in harsh monitoring environments on the market, has gained ATEX (and IECEx) Intrinsically Safe approval for use in flammable atmospheres. This means the TUFF pumps can be used at hazardous plants and production sites where there is a potential risk of explosive dust or gas. Designed to European ...


    By Casella

  • Announcing: New certificate of compliance for Hazardous (classified) locations

    Solid Applied Technologies is proud to announce that its range of ultrasonic level meters have been re-certified for operation in Hazardous (classified) locations. The certifications have been issued by FM APPROVALS (a member of the FM GLOBAL GROUP). The following product lines are certified to FM Class 3610 year 2010: ...

  • QuadraTherm 640i/780i now with full suite of global agency approvals-cFMus, ATEX and IECEx

    Sierra Instruments, a leading global mass flow meter manufacturer, is pleased to announce its evolutionary QuadraTherm 640i/780i has received global approvals for the following standards of safe operation in potentially hazardous environments: cFMus (USA and Canada), ATEX (European Union) and IECEx (International). This signifies that the QuadraTherm is certified as flame-proof and protected from ...


    By Sierra Instruments, Inc.

  • ReactIR™ 247 receives ex certification for zone 1 hazardous environments

    METTER TOLEDO ReactIR™ 247 and related auxiliaries are now certified for safe use in hazardous manufacturing environments designated Ex under the ATEX Directive, specifically Zone 1, Groups IIB + H2, T4 Zone 1. Ready for immediate shipment, ReactIR™ HL-ATEX-certified models will allow more manufacturers in more countries to reduce testing costs, streamline production, and speed ...


    By Mettler - Toledo Int. Inc

  • New Instrinsic Safety Certifications for the CR:110AIS doseBadge for Canada

    Cirrus Research is pleased to announce that the range of Intrinsic Safety Certifications available on the CR:110AIS version of the doseBadge Noise Dosimeter has been expanded with the addition of FM Certification for Canada. This new approval adds to the existing FM certification for the US as well as the ...


    By Cirrus Research plc

  • IECEx certifications gain Michell world-wide approval for Exd analyzers

    Michell Instruments has recently gained IECEx certification for its Exd range of moisture, hydrocarbon dew-point, oxygen and binary gas analyzers. Adding this certification to the range means the analyzers now have approvals for installation in hazardous areas around the world. The complete set of approvals for the Exd range now include: IECEx ...


  • Crowcon`s Detective+ Gas Detector Now Has IECEx Certification For Use In High Temperatures

    Crowcon's intrinsically safe Detective+ free-standing, transportable gas detector has been granted IECEx* and ATEX** certification for use in temperatures up to +50oC. This makes it ideal for use in explosion hazard areas in extremely hot climates or in hot internal industrial environments. Typical applications include refineries and offshore rigs. Providing reliable protection wherever there ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you