atex zone 1 News

  • Chromatotec® certified ATEX for zone 1 & 2

    Since 2009, Chromatotec® proposes a version of its MEDOR® analyzer in Exp cabinet for hazardous areas. This solution dedicated for monitoring and online analysis of sulfurs and odorous compounds in natural gas today received the ATEX certification for zone 1. MEDOR® was already certified for zone 2 since 2014. The ATEX directive consists of two EU directives describing what equipment ...


    By Chromatotec Group

  • TVOC ATEX certified for zone 2 areas without safety barriers

    Ion Science introduces the ATEX approved 3 wire TVOC monitor, for use without safety barriers in Zone 2 hazardous areas. The ATEX certified TVOC (Total Volatile Organic Compound) monitor can be installed without barriers in a Zone 2 area, to directly replace an existing photoionisation detector (PID). A significant benefit to the customer is the instrument’s easy installation; saving time and ...


    By Ion Science

  • TVOC ATEX certified for zone 2 areas without safety barriers

    Ion Science introduces the ATEX approved 3 wire TVOC monitor, for use without safety barriers in Zone 2 hazardous areas.The ATEX certified TVOC (Total Volatile Organic Compound) monitor can be installed without barriers in a Zone 2 area, to directly replace an existing photoionisation detector (PID). A significant benefit to the customer is the instrument’s easy installation; saving time and ...


    By Ion Science

  • QuickCOD®_o: Online COD Determination - explosion-proof - (ATEX Zone 1 and 2)

    The high temperature COD online measurement system- QuickCOD®_o determines the COD in 1 minute without reagents - DIN standard compliant LAR Process Analysers AG presents with the QuickCOD®_o a new online COD measuring system in an ATEX Zone 1 and 2 housing, that provides COD determination within a few seconds even under extremely difficult conditions by using the high temperature method without ...


    By LAR Process Analysers AG

  • New ATEX certificates

    Progressing cavity pumps, peristaltic pumps, and macerators are also certified for use in dusty atmospheres, the ALLTRIMM series is also ATEX compliant. For many years progressing cavity pumps, peristaltic pumps, and mac-erators manufactured by ALLWEILER AG have fulfilled the requirements for use in potentially explosive gaseous atmospheres. But now - since mid-2008 -they are also certified for ...


    By ALLWEILER GmbH

  • ATEX UV disinfection for explosive atmospheres & hazardous areas

    From drilling decks and accommodation platforms, to upstream refineries, many oil, gas and petrochemical installations now require equipment to be installed in hazardous areas and ATEX classified zones.  Explosive atmospheres can be caused by any number of flammable gases, mists, vapours and combustible dusts.  When a sufficient quantity of hazardous material is mixed with air, all that ...


    By atg UV Technology

  • ReactIR™ 247 receives ex certification for zone 1 hazardous environments

    METTER TOLEDO ReactIR™ 247 and related auxiliaries are now certified for safe use in hazardous manufacturing environments designated Ex under the ATEX Directive, specifically Zone 1, Groups IIB + H2, T4 Zone 1. Ready for immediate shipment, ReactIR™ HL-ATEX-certified models will allow more manufacturers in more countries to reduce testing costs, streamline production, and speed ...


    By Mettler - Toledo Int. Inc

  • ATEX UV Disinfection for Explosive Atmospheres & Hazardous Areas

    From drilling decks and accommodation platforms, to upstream refineries, many oil, gas and petrochemical installations now require equipment to be installed in hazardous areas and ATEX classified zones. Explosive atmospheres can be caused by any number of flammable gases, mists, vapours and combustible dusts. When a sufficient quantity of hazardous material is mixed with air, all that is needed ...


    By atg UV Technology

  • Major investment in ATEX crawlers and push-rods

    Responding to increased market demand for equipment that is certified for use in potentially explosive environments (ATEX), Ashtead Technology has become one of the first rental companies to heavily invest in the latest ATEX certified remote control crawlers and push-rod cameras. “We have received a large number of requests for these specialised systems in recent months from a wide range of ...


    By Ashtead Technology Ltd

  • DESMI Ocean Guard receives ATEX certification

    DESMI Ocean Guard A/S announces that notified body DEKRA EXAM GmbH on 9th June 2016 issued ATEX certificate for its RayClean-EX ballast water treatment system. This means the system can now be installed directly in hazardous areas onboard tanker vessels. DESMI Ocean Guard A/S announces that notified body DEKRA EXAM GmbH on 9th June 2016 issued ATEX certificate for its ...


    By DESMI A/S

  • Allweiler Pumps approved for explosive atmospheres. New ATEX certificate for dust

    For many years progressing cavity pumps, peristaltic pumps, and macerators manufactured by Allweiler AG have fulfilled the requirements for use in potentially explosive gaseous atmospheres when used properly. But now – since end 2008 – they are also certified for use in dust-laden explosive atmospheres. The ATEX certificate confirms that Allweiler pumps now fully comply with EU directive 94/9/EC ...


    By ALLWEILER GmbH

  • Vortex FP control panels monitor gas detectors in Zone 1 hazardous areas

    Crowcon’s new Vortex FP Compact control panel increases the flexibility of its flameproof product range. Like the existing Vortex FP, the FP Compact is specifically designed to monitor toxic and flammable gas detectors or fire detectors where there is a need for the control system to be ...

  • Larson Electronics releases a 58 Watt Low Profile ATEX rated LED Light Fixture

    Leading manufacturer and distributor of industrial grade lighting Larson Electronics announces the release of a 58 watt low profile LED light fixture that provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. The ...


    By Larson Electronics LLC

  • atg UV Technology, the World`s Leading Supplier of ATEX UV Disinfection Systems

    From offshore petrochemical installations, to pharmaceutical plants, whisky distilleries and food processing factories, the existence of hazardous areas and ATEX classified zones can pose a difficulty to operators when trying to source safe, reliable and certified equipment.  As a key water treatment technology, UV systems are increasingly required to be design for use in hazardous areas ...


    By atg UV Technology

  • Crowcon`s Vortex FP Flameproof Gas and Fire Detection Control Panel has ATEX Certification

    -ATEX certification allows use in Zone 1 and 2 hazardous areas- Crowcon’s highly successful Vortex range of multi-channel gas and fire detection control panels has been extended to include an ATEX* certified Exd Flameproof version, the Vortex FP, which can be used in Zone 1 and Zone 2 hazardous areas. Photo: ...

  • ReactIR™ 247 certified for class 1, division 1 hazardous use

    METTLER TOLEDO announced today that the ReactIR™ 247 has been certified for safe use in Class I, Division 1 hazardous manufacturing environments and is ready for shipment. Effective immediately, a broader range of manufacturers can take advantage of ReactIR 247’s next-generation Fourier Transform Infrared (FTIR) analysis to characterize a nearly limitless array of process chemistry ...


    By Mettler - Toledo Int. Inc

  • GaugerGSM - Now approved for use in explosive atmospheres

    GaugerGSM – an advanced ultrasonic level meter integrated with cellular (GSM) communications has been approved for use in explosive atmospheres. GaugerGSM is certified to Ex II 1G, Ex ia IIB T4 Ga with Ta = -30°C to +70°C and defined as intrinsically safe. The system is allowed for use in all zones: 0, 1 and 2. The system has been certified to both ATEX and IECEx by SIRA – a ...

  • Pulsar`s Ultra Controllers are available in Rack and Panel Mount Options

    Pulsar's Ultra 3 and Ultra 5 Controllers are available in 19" Rack and Panel mount versions for low cost legacy replacements. Features and benefits of Pulsar's low cost legacy replacements are:- Utilise existing panel cut outs and existing racking Utilise existing wiring (requires 3 cores) Minimal on site modifications Solids or liquids measurement ...

  • Water Samplers and Flow Meters Featured in Isco Stand at ACHEMA 2006

    Lincoln, NE – The Isco-brand environmental water monitoring products of Teledyne Isco, Inc. – including the Model 2150EX flow meter for ATEX Zone 0 and Zone 1 manhole installations – will be featured in Hall 10.2, stand A34-A35. Teledyne Isco, Inc. is a leading manufacturer and supplier of rugged, reliable in-plant and field-portable instruments for monitoring water quality and pollution. ...


    By Teledyne Isco

  • Crowcon`s Xgard Gas Detectors Gain New Approvals

    Crowcon's ATEX-certified Xgard fixed gas detectors have gained new approvals, making them compliant with the safety requirements of an extensive range of markets. The Xgard range is designed to offer protection from a wide range of flammable and toxic gases and oxygen. They are available in explosion-proof or intrinsically safe forms. The first of these new approvals, for Xgard explosion-proof ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you