blade granulator News

  • Universal edge strip granulator

    Cast films and plastic-coated paper sheeting are confectioned by cutting off both of the sheeting edge strips. Irregularities relating to production are thereby eliminated and consistent thickness over the entire width of the sheeting guaranteed. The continuous strips that arise are cut into short pieces with the RC 180 from Hellweg Maschinenbau GmbH & Co. KG, Roetgen. These cuttings can then be ...

  • Deals on TRIA granulators

    eFACTOR3  offers  four brand new-in-crate TRIA granulators at a discounted price. They are currently warehoused in South Carolina and we have: - One 60-42XT 40 horsepower, 5 blade machine, 1200-1600 lb/hr capacity - One 90-32XT 50 horsepower, 5 blade machine, 1800-2500 lb/hr capacity - Two 120-42XT 60 horsepower, 5 blade machine, 2500-3500 lb/hr capacity All machines come with a factory ...


    By eFACTOR3 LLC

  • “Slotter” – low dust granulation

    Low dust granulation of sprues and rejected parts is often a decisive quality aspect for the return of ground material to the production process. The new Slotter (“Slow Cutter”) roll mills from Hellweg Maschinenbau GmbH & Co. KG work without the use of sieves and at a low speed of just 25 r.p.m., so that gentle granulation without thermal degradation, faster delivery of granulate and ...

  • “Slotter” – low dust granulation

    Untitled Document Low dust granulation of sprues and rejected parts is often a decisive quality aspect for the return of ground material to the production process. The new Slotter ("Slow Cutter") roll ...

  • Increasing efficiency with TRIA granulators and eFACTOR3

    eFACTOR3, headquartered in Charlotte North Carolina, is a complete solutions provider of recycling and waste-to-energy equipment. e3 offers a wide range of machines for the recycling industry including shredding, cleaning, granulating and extruding equipment. e3 Adaptive Blades- Built to Last After our feature on the new e3 Adaptive Blade System in June, ...


    By eFACTOR3 LLC

  • MeWa presents a new granulator series

    The UG series granulators produced by the German manufacturer MeWa Recycling Maschinen und Anlagenbau GmbH stand for high throughputs and reliability, even in the demanding scrap sector. This machine type has now been equipped with numerous new features. Granulators can grind various materials down to pre-defined grain sizes. Areas of application include manufacturing substitute fuels from ...


    By ANDRITZ MeWa GmbH

  • New cable stripper and granulation plant launched

    A cable stripper able to handle wire as fine as 1mm together with a low cost cable granulation system are the latest additions to the JMC range of metal recycling equipment. With these two new products, JMC Recycling Systems of Nottingham, England, claims to provide small and large processors alike with the ability to take advantage of today’s high copper prices. Known as the 1000 Euro Strip, ...


    By JMC Recycling Systems Ltd

  • Central grinding - simple, fast, quiet

    Untitled Document Hellweg Maschinenbau GmbH & Co. KG is presenting its 260 series of ...

  • Tyre Recycling Equipment

    Ecosystem Ltd are pleased to announce that they have been appointed sole agents for the Komei (Italy) range of tyre recycling equipment for the UK. Komei make some of the world’s finest granulation equipment for wood, plastic and rubber. Their heavy weight 16500kg KG-1R granulator is designed specifically for shredding used tyres. It is fitted with a heat exchanger to keep the rotor and ...


    By Evashred F.V. Evans & Sons

  • New Mega Mills for large and heavy parts

    Hellweg Maschinenbau GmbH & Co. KG presented at FAKUMA 2005 the new 600 series granulator ('Mega Mill') for the first time. The new granulators round off the product range at the top end. They are characterised by the extremely high stability of the entire machine housing. The high moment of gyration of the rotor, that is machined out of one ...

  • Why NOW is the Best Time to Test our Cutters

    Production downtime is expensive. How often do you change your cutters? How long do they really last? Have you considered anything other than standard? eFACTOR3 carries stock of: Standard D-2 NEW Carbide-Capped Cutters Carbide Inlay Cutters Serrated Blades. In a variety of sizes: 30x30, 40x40, 50x50, ...


    By eFACTOR3 LLC

  • New machine processes steel wire from tyre recycling

    Tyre wire cleaner made by MeWa separates steel and rubber. Around 3.5 million old tyres are returned for recycling every year in the European Union. A large proportion of these tyres are used to make rubber granulates. However, tyres also contain a substantial amount of steel wire. For this content, MeWa Recycling Maschinen und Anlagenbau GmbH from Gechingen has now developed the UNI-CUT® SP tyre ...


    By ANDRITZ MeWa GmbH

  • MeWa supplies recycling line for scrap tyres to South Korea

    Tyre wire cleaner recycles steel tyre cord The South Korean company Anothen WTE (waste to energy) is involved in the entire rubber raw material cycle, from the manufacture of new tyres to recycling used ones. MeWa Recycling Maschinen und Anlagenbau GmbH, based in Gechingen/Germany, has now supplied a new shredding line for scrap tyres to the company's facility in Geumsan. The UNI-CUT ...


    By ANDRITZ MeWa GmbH

  • Used recycling equipment specials from eFACTOR3

    New Comprehensive Service Package Offerings As the demand for recycling equipment has increased, so has the demand for efficient and reliable operation. The key component of a successful system is proper maintenance and while we have always offered service packages with our new machines, we will now be offering service packages for all manufacturers we represent. The packages include ...


    By eFACTOR3 LLC

  • ONESTEP Solution gets Huge NPE Welcome

    We're glad we had a chance to catch up with many of you at the International Plastics Showcase (NPE 2012) in Orlando earlier this month. The show was a great success for us at eFACTOR3 and for the innovative manufacturers we represent.  In particular, the launch of the new ONESTEP Extrusion System by MAS to the North ...


    By eFACTOR3 LLC

  • MeWa introduces new special shredder for cable waste

    Accordingly cable waste promises high output quality, this recycled content is a sought-after commodity. MeWa Recycling Maschinen und Anlagenbau GmbH in Gechingen, Germany, introduces for the first time with the CableCutter CC 1200 a machine that is completely geared towards breaking down cable waste. Especially the plant efficiency of the treatment process can be decisively increased by this new ...


    By ANDRITZ MeWa GmbH

  • WEIMA develops F-Rotor for shredding of filaments and films

    WEIMA Maschinenbau GmbH, Ilsfeld, has further developed the rotor of the single shaft WLK type shredder especially for difficult shredding of textile filaments, tapes, but also for films etc. The co-called F-Rotor (F=filaments) is characterised by novel blade separation and cutting geometry designed for the purpose of use. This guarantees an optimal shredding process with high energy efficiency. ...


    By WEIMA

  • Vecoplan AG presents new development: EBS high performance shredder: debut at Entsorga

    12.5 tonne heavy solid steel rotor with over 400 kW drive capacity produces most homogenous alternative fuel (RDF) granulate On display at Entsorga 2009 as of 27 October Machine and plant manufacturer VECOPLAN AG looks set to take the industry by storm yet again when it reveals an innovative highlight at Entsorga, the most important trade fair in the field, in Cologne. What more ...


    By Vecoplan AG

  • Turn Your Waste into Profit – Sustainable and Flexible Solutions with Gamma Meccanica

    The opportunity and solutions we can offer you are from Gamma Meccanica. Gamma Meccanica SpA is a 35 year old company with 90+ employees, generating more than 40 million Euro in turnover in 2010. Gamma Meccanica North America – located in Greer, South ...

  • Loeriesfontein wind farm turbine foundations amongst the world’s greenest

    Loeriesfontein Wind Farm has announced that its wind turbine foundations are utilising one of the world’s lowest quantities of Portland cement in the concrete formulation.  The foundations are designed using an 89% replacement of cement, resulting in, what we believe to be, one of the world’s lowest carbon footprints for any wind farm foundation; according to research scientist, ...


    By Mainstream Renewable Power

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you