blower manufacturer News

  • China Bottle Blower-Different Development

    Due to the rapid development of bottle packaging, china bottle blower industry has improved continuously. The manufacture and R & D technology gap between china bottle blower and international industry become smaller. In fact, the rapid development of china bottle ...


    By Shenzhen J&D Group

  • Vac-Con, Inc. Manufactures 6,000th Unit

    Vac-Con, Inc. announced a milestone in its company's history as it manufactured its 6,000th unit. Vac-Con manufactured its 5,000th unit in 2008. Since 2005, Vac-Con has been averaging close to 300 units per year. The attached group photo was taken at the entrance of the plant.   The 6,000th unit, a custom built, dual-blower, XX-Cavator™, was completed in the middle of March. The ...


    By Vac-Con, Inc.

  • Innovations `made in Aerzen`

    In 1987, with the three-lobe blowers, AERZEN introduced an important new product. These patented blowers for conveying large volumes of air, beginning at 3,000 cubic metres intake volume per hour, worked with a controlled pre-inlet particularly well in the low frequency range - they were quiet and operated with little vibrations. This allowed a considerable reduction in the sound absorption ...

  • From atmospheric pressure to vacuum

    Negative pressure from up to 500 mbar (300 mbar abs.) can already be achieved with one stage. This is possible thanks to the AERZEN positive displacement blowers of series Delta Blower G5, or the newly developed rotary lobe compressors of series Delta Hybrid. A vacuum pumping set is mandatory for pressures below 300 mbar abs., and here a backing pump and a vacuum positive displacement blower are ...

  • AERZEN biogas packages made in India

    Research in the Indian market revealed a significant requirement for biogas blower packages in the country, especially types from GM3S to GM50L (volume flows from 168 to 252 m³/h). This research was the starting signal for local production! Thanks to the production of local components on site, and machines adjusted to the needs of the market, AERZEN is able to quote for attractively priced ...

  • Soil-Therm Equipment, Inc Revolutionizes Soil Vapor Extraction Operations with ReMAC…Remote Monitoring and Control Technology

    “As a custom environmental and remediation equipment manufacturer since 1990, Soil-Therm Equipment Inc has now created a simple, practical and cost effective internet monitoring and control system to operate on any system they build.  From blowers, oxidizers, electric and chlorinated oxidizers, customers can monitor and control their entire system using an iPad, iPhone or laptop ...


    By Soil-Therm Equipment, Inc.

  • Into Top Gear – David Brown and Santasalo Merge to Create a new Global Force in Mechanical Power Transmission

    David Brown and Santasalo, two of the world’s leading mechanical power transmission companies merged on June 1st to create David Brown Santasalo, a new, truly global force in the gear industry. With more than 1,000 employees, 7 major manufacturing plants and 23 service centres across 6 continents, the business is ideally equipped to serve its growing customer base in commodities, marine, ...


    By Santasalo Gears Oy

  • China Wind Turbine Industry Report, 2013-2016

    ResearchMoz.us include new market research report" China Wind Turbine Industry Report, 2013-2016 " to its huge collection of research reports. China Wind Turbine Industry Report, 2013-2016 released by Sino Market Insight predicts that by 2016, China's wind turbine output will remain at about 7.4 million sets. View Full This Report ...


  • Aerzen Turbo – Solution for tomorrow’s world!

    With the experience in manufacture of positive displacement blowers since 1868 and screw compressors since 1943 Aerzen regularly sets new standards in quality and innovation of twin shaft rotary piston machines. Aerzener Maschinenfabrik GmbH counts among the pioneers in compressor technique and is one of the world-leading manufacturers today. For the first time now Aerzen presents a new ...


    By DECHEMA Ausstellungs-GmbH

  • AERZEN celebrates 150th anniversary of its foundation

    From foundry to worldwide successful company group: The machine manufacturer AERZEN has experienced all sorts of ups and downs within the past 150 years of its existence. There were soon affinities to the medium gas, AERZEN’s core business unit. In the middle of the 19th century coking plants, iron foundries and forges required compressed air in large, industrial quantities. In 1868, AERZEN ...

  • To separate the wheat from the chaff

    Air blowers play the most important role in biological sewage treatment systems. Because of this they must also be the most efficient and be guaranteed to work. Consequently, a manufacturer must be chosen carefully, who produces good quality products, has a long experience and knowledge of aeration, and is therefore unbeatable in durability and reliability of it’s products. Nitto Kohki is ...


    By Nitto Kohki Europe Ltd

  • Strong presence in Singapore

    The SIWW trade fair is part of a strategic programme of the Government of Singapore for strengthening the water industry and the development of water technologies. On the one hand the country wants to fulfil its role as South East Asia’s driving force for engineering and developing new technologies for water treatment, but on the other hand it does not have its own natural resources. Now, ...

  • AERZEN TURBO convinces with the new concept for oxygen introduction at Wansdorf sewage plant

    The company operating the Wansdorf sewage plant, which was completed in 1998, is a co-operation between Berliner Wasserbetriebe, four municipal authorities and a special-purpose association in Brandenburg. More than half of the waste water purified in Wansdorf comes from Brandenburg, and the rest comes from Berlin. The plant was designed for a population equivalent of 200,000. As the waste water ...

  • AEROMIX Package Plant treats wastewater from Children’s Home

    A new design extended aeration Packaged Wastewater Treatment Plant has been manufactured and shipped to treat the wastewater produced from a children’s detention home in the south eastern US. The Packaged Treatment Plant is completely self contained and assembled allowing nearly instant operation upon arrival. This new Package Plant, capable of treating up to 25,000 gpd of domestic wastewater, ...


    By RWL Water LLC

  • Really Indian, completely AERZEN

    Following a market review carried out by Aerzen Machines (India) Pvt. Ltd., it emerged that there is greater demand for screw compressors of the size of our VM 85. It was therefore decided to produce them locally. Our Indian production site already manufactured blower packaged units of series Delta Blower in nominal widths DN50 to DN400, and maintained stages through its own after-sales service. ...

  • Allegro Industries Corporate Profile

    GARDEN GROVE, CA -- Since 1987, Allegro Industries has been dedicated to offering high quality safety equipment to distributors and industry. “Our growth in this market is a result of our commitment to the design and manufacture of innovative, quality products that meet the needs of industry, and make safety compliance easier,” commented Tom Johnston, President of Allegro Industries. ...


    By Allegro Industries

  • The principles of aeration & mixing utilizing process aerator technology

    Aeration and mixing are necessary elements for aerobic biological wastewater treatment processes to maintain a healthy, stabilized biological population and thus, insure optimal treatment of the wastewater assuming there is adequate contact time and substrate available. In the design of wastewater treatment plants, aeration typically involves supply of both oxygen and mixing. Aeration is a large ...

  • USEPA Approval for Ecotech’s High Volume Air Sampler

    The US EPA has announced the designation of Ecotech’s HVS3000 High Volume Air Sampler as a new reference method for measuring concentrations of PM10 in the ambient air. The designation is made under the provisions of 40 CFR part 53, as amended on July 18, 1997 (62 FR 38764). The newly designated reference method is identified as follows: RFPS–0706–162, Ecotech Pty. Ltd. Model 3000 PM10 High ...


    By Ecotech Pty Ltd

  • USEPA Approval for Ecotech’s High Volume Air Sampler

    The US EPA has announced the designation of Ecotech’s HVS3000 High Volume Air Sampler as a new reference method for measuring concentrations of PM10 in the ambient air. The designation is made under the provisions of 40 CFR part 53, as amended on July 18, 1997 (62 FR 38764). The newly designated reference method is identified as follows: RFPS–0706–162, Ecotech Pty. Ltd. Model 3000 PM10 High ...


    By American Innovations (AI)

  • Introducing the Hydro-Oil Twin for deep vacuum applications!

    Engineered vacuum packages  “Hydrotwin” and “Oiltwin” are the new series of compact high vacuum packages that guarantee a working vacuum level up to 29.86” HgV (1.5 Torr abs.) and capaci0es to 2100 ACFM (3500 m3/h). The Package The project has been developed with the close cooperation of Bora Blowers who are specialists ...


    By Travaini Pumps

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you