briquetting News

  • FOR SALE: briquetting plant with briquetting press for tyre wire

    Purpose: The press is suitable for pressing and/or briquetting of flowable/trickle, short or cut up trick-, mill-, boring and sawchips from steel. An extremely durable execution of our presses makes continuous operation possible under difficult conditions and extreme environmental influences. Advantages: High press achievement despite low drive power ...


  • For sale: Briquetting plant with briquetting press for tyre wire

    Purpose: The press is suitable for pressing and/or briquetting of flowable/trickle, short or cut up trick-, mill-, boring and sawchips from steel. An extremely durable execution of our presses makes continuous operation possible under difficult conditions and extreme environmental influences. Advantages: High press achievement despite low drive power ...


  • Briquetting Press an Eco Friendly Project

    We Jay Khodiyar Machine Tools came up with the solution of the entire above problem. We are manufacturing the biomass briquettes machine that converts agriculture and forestry waste into solid fuel briquettes. These briquettes are 100% eco friendly fuel. As it is made up of agro forestry waste it does not releases the toxic gases that pollute the environment. These biomass ...


    By JK BioEnergy

  • Overcome Limitation Of Fossil Fuels With Briquetting Press Machine

    Increasing number of companies and vehicles has drastically increased the consumption of fossil fuel. The problem here is limited availability of these resources. Though nature has gifted us with these resources to get solution for our requirements, but these can be helpful only till the time used in proper way. Today people just look at meeting with their requirements and are least bothered ...


    By Jay Khodiyar Machine Tools

  • Briquetting of aluminium chips - more profitable then ever

    Companies which manufacture aluminium are under a rising cost pressure. In the recent past this industry has had to face the higher costs for coolants and also the increasing prices for the metal, while the sales prices are still under the same pressure as before. Briquetting is an economical and ecological addition to the recycling process. The value enhancement with aluminium briquettes ...

  • Briquetting Machine Plant India Project For Energy Future

    In recent past years, a significant rise in the consumption of conservative fuels like coal, furnace oil, lignite, tree wood, etc. in small and medium level industries for their manufacturing process involving heat and power generation for their production process is found. This increasing demand for conventional fuel is making erosion of natural resources and also cause many environment ...

  • Cut Green House Gas Emissions through Biomass Briquetting

    Increasing pollution and green house gases are some of the major concerns for environment. People are looking for effective tools and techniques to cut down these hazardous factors in the air. Biomass briquetting through waste recycling is one of the effective techniques to reduce green house gases. Economic development is the prime objective of any county and one of the major contributors in ...


    By Jay Khodiyar Machine Tools

  • How to Convert Waste into Renewable Energy through Briquetting Plant?

    Day by day huge amounts of waste are produced by various human activities. This waste produces environmental pollution. So we have to manage the waste so that we can reduce environmental pollution. Biomass Briquette Machines help us to manage this waste. Biomass Briquette Machines convert agriculture and forestry waste into solid fuel ...


    By JK BioEnergy

  • Briquetting press HSB 12 for Schupan & Sons Metal Recycling in Michigan, USA

    The company Schupan & Sons Metal Recycling in Michigan, USA, visited our stand at the ISRI’s  2008 Convention & Exposition in Las Vegas at the beginning of April. After market investigations by Schupan & Sons we started intensive negotiations and were able to successfully secure the order in spite of stiff competition. After our recent successful resumption of marketing activity ...


    By ATM Recyclingsystems GmbH

  • 3rd Briquetting Press HSB 18 has been started up at VTORMET in Moscow

    On the 1st of April 2008 our long established customer, Industrial Company VTORMET, put into operation it’s third briquetting press HSB 18. With this steel swarfs can now be pressed and the briquettes sold to foundries. These can be smelted as secondary raw materials or also used in the foundry. Briquetting produces more additional revenue in comparison to loose swarf. ATM briquetting presses ...


    By ATM Recyclingsystems GmbH

  • ATM Metal-Recycling-Plant in Belarus

    In September 2007 ATM started up 4 pc. Briquetting presses Type HSB 18 in Republic of Belarus. Our customer State Amalgamation Belvtoremt has been briquetting his steel turnings since then and sells the steel-briquetts to foundries. They melt the briquettes as secondary material again. The briquetting obtains a substantial profit in comparison with bulk turnings. ATM briquetting presses provide ...


    By ATM Recyclingsystems GmbH

  • Newsletter 01-2011

    The financial crisis that started in 2008 is still affecting many customers. The traditional customer for briquetting equipment comes from the wood working industry and this industry was for some time seriously affected by the crisis due to the downturn in the building industry. However, in Scandinavia and some other countries business is getting back to normal. Furthermore, new markets for ...


    By C. F. Nielsen A/S

  • WEIMA America is expanding!

    WEIMA America will be expanding its South Carolina headquarters in order to accommodate the ever-increasing demand for shredding and briquetting. Our headquarters, located in Fort Mill, SC, currently houses two functional showrooms as well as our parts and service department and administrative offices. The extra square footage will allow us to meet the needs of this growing market by stocking ...


  • RUF expands programme of the Briquette Formats

    Well-known for high-quality briquetting systems, RUF GmbH & Co. KG of Zaisertshofen has expanded their programme of the briquette formats. New in the programme: a machine especially designed for aluminium chips, which produces round briquettes with a diameter of 150mm and a length of maximum 150 mm. In the metal-works industry, large quantities of chips are produced, whose value can be ...

  • Exploit woodchips efficiently

    Ruf presents new briquetting press  Ruf Maschinenbau are bringing two new briquetting systems on to the market with the RUF 300 and the RUF 500, both of which are suited to the processing of diverse wood residuals and further biomass.   The demand for the climate neutral raw material wood as a heating material remains extremely high. As a consequence ...

  • IFAT 2016

    RUF will present their briquetting systems from 30.05.-03.06.2016 at IFAT in Munich, Germany. You will be able to meet our employees at our booth 232 in hall C1, and introduce yourself to various models as well as current developments. If you have any interest on your part in visiting IFAT 2016, we would be happy to send you a free ticket. We are looking forward to meeting you ...

  • Grindtec 2016

    RUF will present their briquetting systems from 16 to 19 March 2016 at Grindtec in Augsburg, Germany. You will be able to meet our employees at our booth 1014 in hall 1, and introduce yourself to various models as well as current developments. If you have any interest on your part in visiting Grindtec 2016, we would be happy to send you a free ticket. We are looking forward to ...

  • Choose Right Raw Material for Quality Briquettes

    Briquetting is an effective fuel making technique. But to get maximum benefits, you need to choose raw material carefully. From the particle size to moisture level, you need to look at every factor to ensure high quality briquetting with least efforts. Biomass briquettes are perfect energy source and alternate of fossil fuels. If made from right raw material and in right machines, these can ...


    By Jay Khodiyar Machine Tools

  • Successful participation at the IMTS show in Chicago

    We presented our single-shaft shredders for processing of all kind of metal swarf together with our sales partner, John Hart USA. The briquetting of our partner John Hart USA is the ideal amendment of our products. Through this there are many new ranges of application. The machine building industry is steadily gaining momentum after the economic crisis in 2009 – the great number of ...

  • WEIMA America to expand its North American headquarters

    WEIMA America will be expanding its South Carolina headquarters in order to accommodate the ever-increasing demand for shredding and briquetting. Located just south of Charlotte, NC, WEIMA America’s headquarters currently houses two functional showrooms as well as the company’s parts and service department and administrative offices. The extra square footage will allow the ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you