bulk material transport News

  • Edge innovate’s total versatile bulk loading solution

    The Static (SL) / Mobile (ML) / Tracked (TL) vessel loader, is the newest addition to the EDGE range of mobile bulk handling equipment. This highly versatile and mobile unit is capable of transferring up to 1,200 tons per hour of material, and can accept material direct from large dumping trucks or tipping trailers. The Edge-Loader features a conventional belt design and large wide track ...


    By EDGE Innovate

  • Canadian bulk carrier spills oil into Maumee River

    Droves of cleanup workers spent much of the weekend trying to contain and collect 3,300 gallons of diesel fuel that spilled into Ohio's Maumee River Friday night by a Canadian bulk carrier. Loaded with grain, the Algonorth was leaving the Midwest Marine Terminal Friday night when the vessel's stern smashed into the dock, rupturing two fuel tanks 10 feet above the water line, according to the ...

  • Bulk Container Manufacturer Unveils Sanitary Dispensing Container

    Material handling product manufacturer MODRoto, Madison, IN (MODRoto.com) has unveiled its Powder-Saver dry hopper container in a sanitary design. Rotationally molded from FDA/USDA-approved polyethylene and fitted with a stainless steel, dust-tight slide gate, the plastic, sanitary dispensing container ...


    By MODRoto

  • Hoover Materials Handling Group, Inc. offers DNV 2.7-1-certified IBC Transport Frame

    Houston, TX – Hoover Materials Handling Group, Inc. is pleased to announce that it has received DNV-certification for its newly designed IBC transport frame for containers used offshore. The Liquiframe™ is a DNV-certified frame constructed of 304 stainless steel. The Liquiframe™ can be used to safely transport standard 350- and 550-gallon Liquitotes™ or other Intermediate Bulk Containers ...

  • BEPeterson, Inc. Unveils Filter Pressure Vessel for Rage Bulk Systems

    BEPeterson is pleased to announce the shipment of a Filter Pressure Vessel Assembly for the Rage Bulk Corporation, Doylestown, PA. The filter vessel manufactured to ASME code met the design specifications required for Rage Bulk Corporation and the demands of the oil and gas refinery industry.  BEPeterson supplied a fully assembled and tested main 304L stainless steel filter housing, the ...


    By BEPeterson

  • Tilt-down portable bulk conveyor fits tight spaces, cleans easily

    BETHLEHEM, PA — A new Bulk Conveyor with Tilt-Down Portable Base fits through tight spaces and provides easy access for removal of the flexible screw. It features a reduced footprint that enables the caster-mounted frame to maneuver through narrow aisles and around corners. ...


    By Flexicon Corporation

  • Hoover Offers SP-12412 Compliant Intermediate Bulk Container (IBC)

    Houston, TX – Hoover Materials Handling Group, Inc. announced it now offers its Cargo Valve Liquitote™ an IBC that complies with the DOT’s Special Provision 12412. DOT - SP12412, commonly referred to as the pump-off special permit, allows for the discharge of combustible and flammable liquids from an IBC while it is located on a transport vehicle. Under this special permit, only IBCs with ...

  • A de-material world: receiving the benefits of materials while using less

    An overview of ‘material efficiency’ is provided in a recent study, which assesses a range of technical and sociological approaches to material efficiency. The need for drastic efficiency improvements is highlighted by the researchers, as well as cuts in the total amount of materials used. Global demand for material extraction and processing is expected to double over the next 40 ...

  • Real-time control drives efficiency into dry bulk handling operations

    Dry bulk cargos have to be loaded and unloaded quickly, efficiently, cost effectively and safely if shipping operations are to be profitable. The processes have long been mechanised, but by harnessing the power of computers to monitor the handling equipment, operational performance can be improved, scheduling for maintenance can be optimised and billing of customers can become automated. Tony ...


    By Sensor Technology Ltd

  • Efficient temporary storage and loading of de-inking material

    For cost reasons, sorting plants increasingly load high-quality de-inking material in bulk instead of pressing bales for transport. Certainly loose material has a higher volume than bales. Thus, the appropriate hopper- and loading technology provides a number of advantages. The loading of bales necessarily requires a repeated treating of the de-inking material. It has to be pressed, piled ...


  • 4 Safety Considerations For Anyone Storing, Handling, or Transporting Substances

    4 Safety Considerations For Anyone Storing, Handling, or Transporting Substances By Daniel L. Theobald, Environmental Services Substances regulated or substances unregulated may ultimately impact the environment, health, and water supply of others. The following safety considerations are advised for those who store, handle, or transport potentially dangerous substances. ...

  • Idaho Transportation Department settles with EPA for exposing untrained workers and mishandling asbestos waste during shop renovation

    The Idaho Transportation Department (ITD) has agreed to a settlement with the U.S. Environmental Protection Agency (EPA) for alleged violations of federal asbestos regulations. EPA has alleged that ITD hired inmates from the St. Anthony Idaho Work Camp (Idaho Department of Correction) to perform renovation work involving removal of asbestos-containing floor tile at an ITD Maintenance Shop in ...

  • HENNLICH ENGINEERING is seeking for new partners/representatives who are interested in promoting and selling our products.

    HENNLICH ENGINEERING is an engineering and manufacturing division that deals with bulk material transportation and storing. Our main product line is loading spouts for dust-free loading of bulk solids in places where loose mass is handled and dust tends to disperse into the air. HENNLICH ENGINEERING also manufactures filter units that are used for dust suppression in plants and silo storage. Our ...


    By Hennlich Engineering s.r.o.

  • FORUS pre-shredder replaces machine from the competition in MBT plant in the Polish town of Marszów, near Zary

    Since November of this year, the SE 450 – a pre-shredder of the Eggersmann Group’s FORUS brand – has been found in use in a mechanical-biological treatment plant in Marszów. The MBT realized by the Eggersmann group of companies has been in operation since January 2015 and was to a large degree provided using their own product portfolio. Waren. The large diversity of ...


    By Eggersmann GmbH

  • FORUS pre-shredder replaces machine from the competition in MBT plant in the Polish town of Marszów, near Zary

    Since November of this year, the SE 450 – a pre-shredder of the Eggersmann Group’s FORUS brand – has been found in use in a mechanical-biological treatment plant in Marszów. The MBT realized by the Eggersmann group of companies has been in operation since January 2015 and was to a large degree provided using their own product portfolio. Waren. The large diversity of ...


    By Eggersmann Anlagenbau

  • Tewkesbury awards £168m recycling contract

    Tewkesbury Borough Council has awarded a £1.68m recycling contract to Pure Recycling. The agreement will see Pure Recycling – which today announced it has been acquired by construction firm Kier – processing commingled dry recyclables from 36,000 households. The firm will take paper, card, cardboard, aluminium and steel cans, mixed glass and plastic bottles. ...

  • All-New Sanitary Box Dumper from Flexicon

    An all-new TIP-TITE® Sanitary Box Dumper from Flexicon forms a dust-tight seal between the container and the equipment, tips the container, and discharges bulk material at controlled rates. The unit is intended for dumping of bulk foods, pharmaceuticals and contamination-sensitive chemicals from boxes weighing up ...


    By Flexicon Corporation

  • Tilt-Down Flexible Screw Conveyor

    New from Flexicon is a Sanitary Tilt-Down Flexible Screw Conveyor on a caster-mounted frame that can be maneuvered through narrow aisles and around corners. With the hopper, support boom and conveyor assembly tilted down, the unit fits through standard doorways and orients the conveyor tube horizontally, ...


    By Flexicon Corporation

  • TAIM WESER will participate in METEC 2011

    After its successful participation in the previous edition of METEC, in 2007, TAIM WESER is returning to the prestigious German trade fair represented by its products specially designed for the lifting and bulk handling industries, sectors in which the company is a world leader, having installed its systems in 59 countries. At METEC 2011, TAIM WESER will basically be promoting its cranes for the ...


    By Taim Weser S.A.

  • ATM Metal-Recycling-Plant in Belarus

    In September 2007 ATM started up 4 pc. Briquetting presses Type HSB 18 in Republic of Belarus. Our customer State Amalgamation Belvtoremt has been briquetting his steel turnings since then and sells the steel-briquetts to foundries. They melt the briquettes as secondary material again. The briquetting obtains a substantial profit in comparison with bulk turnings. ATM briquetting presses provide ...


    By ATM Recyclingsystems GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you