calibration gas News

  • Gas Dilution Calibration System

    Ecotech is pleased to announce the release of the new GasCal 1100 Gas Dilution Calibration System. The GasCal 1100 is designed using the latest technology to precisely control the dilution of gas standards for calibration of ambient air and source emission monitoring analysers. The calibrator may be connected with up to 4 external gas cylinders for precise dilution of these gas standards with ...


    By Ecotech Pty Ltd

  • Model 150 Dynacalibrator® Calibration Gas Generator

    VICI Metronics’ Dynacalibrator® Model 150 is a constant temperature system designed to generate precise ppm or ppb concentrations of chemical compounds in a gas stream, using permeation devices as the trace gas source. It is used as a reference for the calibration of gas chromatography instruments and in other instruments that measure gas concentrations. This light-weight unit is a compact ...


    By VICI Metronics

  • LCU: a new, versatile device for trace gas calibration

    Discover a new calibration method for trace gas analyzers over an extensive range of compounds and concentrations.  ...


    By Ionicon Analytik Ges.m.b.H.

  • EN ISO 17025 calibration

    On rare occasions, e.g. when a device is used for measurement of emissions of industrial objects (and based on that a fine for environment pollution is calculated) the device must hold a valid calibration certificate, issued by authorised, accredited laboratory. madur co-operates with accredited laboratory, therefore it is possible to deliver any device with the mentioned ISO 17025 certificate. ...


    By madur Polska Sp. z o.o.

  • Flare Flowmeter Validates Calibration

    Ideal For Refineries, PetroChemical Plants, Biogas, Offshore Platforms, Wellheads, Tank Farms, Fossil-Fuel Power Plants, Ship-to-Shore Offloading FCI has enhanced its GF03 Flare Flowmeter with an industry exclusive new VeriCal™ in-situ calibration verification kit. This new kit is designed to meet emerging extensions to environmental agency regulations that will require installed calibration ...

  • Certification of calibration instruments for refrigeration

    Equipment Subject to Adjustment: The equipment that should be subject to periodic calibration are: Digital thermometer 4-way Manifold for R410A and R407c analog or digital Electronic balance; Digital Caliper / Meter AC Refrigerant gas leak detector The calibration process is the operation that the door, by comparison with a standard instrument , ...


    By Eurotec BT Srl

  • The high performances gas diluter/calibrator from LNI Swissgas

    LNI Swissgas in Geneva/Switzerland is proud to announce the launch of the new gas dilutor/calibrator: the Sonimix Sx7100. The Sx7100 is the 2nd generation of the previous Sx7000. It uses a combination of high precision Mass Flow Controllers (MFC’s) according to the norm ISO 6145-7. The goal of the Sx7100 is to reduce the amount of gas cylinders standards and generate any mixture ...


    By LNI Swissgas

  • Instrument for the preparation of gas standards for mono and/or multipoints calibration: airmoCAL M

    Simple and accessible through its integra­ted software, airmoCAL M can be used to calibrate analytical instruments with standard bottles or permeation tubes. airmoCAL M can automatically prepare and inject gas for all kinds of analytical instruments. The principle of this device is based on mixing, dilution and injection of calibration gases, which can be useful in many applications, such as ...


    By Chromatotec Group

  • UKAS Quality Award, a UK first - for Geotech in Gas Analyser Calibration

    Geotech has achieved UKAS accreditation for its calibration lab for its full range of landfill, biogas and waste to energy gas analysers. According to its UKAS assessor, “Geotech is the first manufacturer of portable gas analysers to obtain UKAS accreditation.” For Geotech gas analysers, already with MCERTS certification for the instrument, this important UKAS accreditation gives Geotech analyser ...


    By Geotech

  • Sierra expands primary standard gas flow calibration systems & online store

    Sierra Instruments, a leading global mass flow meter and controller manufacturer, is pleased to announce the expansion of their primary gas flow calibration systems with the new economical CalTrak® 300 and 350. With increased portability and ease-of-use, now end-users can deliver precision flow calibration and validation, based on a primary standard, ...


    By Sierra Instruments, Inc.

  • Dynamic calibration of pressure sensors for engines

    The characterisation of the pressure sensors used to develop the next generation of petrol and diesel engines is crucial to optimising their design, improving efficiency and reducing emissions. The National Physical Laboratory (NPL) has developed shock tube facilities for the calibration of these sensors under the dynamic pressure conditions that they experience in use. Manufacturers of petrol ...

  • Addition of in-built calibration gas dilution function to our range of FTIR Gas Analysers

    Protea are proud to announce the addition of in-built calibration gas dilution function to our range of FTIR gas analysers. This feature, using precision a Mass Flow Controller within the analyser, allows the FTIR user to dynamical calibrate their FTIR gas analyser from within the FTIR software at the touch of a button. Without the need for expensive external gas dilution equipment, FTIR gas ...


    By Protea Limited

  • Do You Know the Importance of bump testing & calibration?

    Gas detection technology has developed rapidly, bringing with it the introduction of “maintenance free” gas detectors. As a result, gas detection users have become more reliant on the sensor lasting longer, assuming that the gas detector will work properly without routine calibration. However, this isn’t the case ...


    By a1-cbiss

  • Remote-controlled calibration without liquid standards

    The TOC analyser QuickTOCpharma reliably determines the Total Organic Carbon (TOC) in the lowest measuring range up to 2000ppb. Following the requests, the FDA compliant software (CFR 21 Part 11) among other things facilitates data storage and an electronic signature. The software fully controls the analysis system. Moreover, it combines the high demands of pharmaceutical water measurements, in ...


    By LAR Process Analysers AG

  • New Calibration Extending Firmware (CEF) Added Feature

    Critical Environment Technologies Canada Inc. (CETCI) announces latest added feature, Calibration Extending Firmware (CEF), to all future developed products. CETCI introduced the CEF to the PET BACnet® transmitter in 2010. The new sensor CEF takes into account the aging of the sensors so that less frequent calibrations are acceptable in non-critical applications. With great success and ...

  • New Oxygen Sensor Makes Calibration Quick and Easy

    ORMOND BEACH, Fla. - CO2Meter.com has introduced a new 25% Oxygen Level Sensor designed to drastically lower maintenance costs by simplifying the calibration process. Oxygen sensors are used in any environment where oxygen depletion can occur. This includes liquid nitrogen storage ("cryorooms"), vacuum test chambers, "permit-required" enclosed spaces, or any workplace that ...


    By CO2 Meter, Inc.

  • RAE Systems` New AutoRAE 2 Automatic Test and Calibration System Keeps Gas Monitors Accurate, Workers Safe, and Facilities in Compliance

    RAE Systems, the leading provider of connected gas and radiation detection solutions today announced its new AutoRAE 2 Automatic Test and Calibration System for the MultiRAE family of multi-threat monitors. The new system is an easy-to-use, yet powerful tool that helps organizations ...


    By RAE Systems by Honeywell

  • RAE Systems` New AutoRAE 2 Automatic Test and Calibration System Keeps Gas Monitors Accurate, Workers Safe, and Facilities in Compliance

    RAE Systems, the leading provider of connected gas and radiation detection solutions, today announced its new AutoRAE 2 Automatic Test and Calibration System for the MultiRAE family of multi-threat monitors. The new system is an easy-to-use, yet powerful tool that helps organizations keep ...


    By RAE Systems by Honeywell

  • New Products: Model 2010D, 5.25` Rack Mount Dilution Calibrator

    For those of you that are familiar with Sabio"s Model 2010 Portable Gas Dilution Calibrator, the unit has recently been upgraded to reach it"s full potential. The Model 2010 has increased in terms of the number of source valves available, gas outputs, digital I/O, external valve driver and the ability to be retrofitted into the new 5.25" rack mount u-chassis. ...

  • Humidity calibration in non-air gases at above-atmospheric pressures

    Many laboratories can only perform humidity calibrations in air at atmospheric pressure. However, industrial humidity measurements may be at high pressures, or in other gases. For best validity, humidity calibrations should ideally be in the gas medium of use, because the performance of some hygrometers can depend on gas species and pressure. Calibration ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you