calibration gas generator News

  • Model 150 Dynacalibrator® Calibration Gas Generator

    VICI Metronics’ Dynacalibrator® Model 150 is a constant temperature system designed to generate precise ppm or ppb concentrations of chemical compounds in a gas stream, using permeation devices as the trace gas source. It is used as a reference for the calibration of gas chromatography instruments and in other instruments that measure gas concentrations. This light-weight unit is a compact ...


    By VICI Metronics

  • Gas Dilution Calibration System

    Ecotech is pleased to announce the release of the new GasCal 1100 Gas Dilution Calibration System. The GasCal 1100 is designed using the latest technology to precisely control the dilution of gas standards for calibration of ambient air and source emission monitoring analysers. The calibrator may be connected with up to 4 external gas cylinders for precise dilution of these gas standards with ...


    By Ecotech Pty Ltd

  • New Gas Generator to check personal Gas Detectors

    Personnel working in chemical plants protect themselves with personal gas detectors from gas exposure. Gas leaks are very unlikely to occur, so the gas detector will always display „0“. An instrument displaying zero can do so for two reasons: a) The concentration is zero. b) The instrument is defective. For good reasons a daily check of the instrument is mandatory. It would ...

  • The high performances gas diluter/calibrator from LNI Swissgas

    LNI Swissgas in Geneva/Switzerland is proud to announce the launch of the new gas dilutor/calibrator: the Sonimix Sx7100. The Sx7100 is the 2nd generation of the previous Sx7000. It uses a combination of high precision Mass Flow Controllers (MFC’s) according to the norm ISO 6145-7. The goal of the Sx7100 is to reduce the amount of gas cylinders standards and generate any mixture ...


    By LNI Swissgas

  • Dynamic calibration of pressure sensors for engines

    The characterisation of the pressure sensors used to develop the next generation of petrol and diesel engines is crucial to optimising their design, improving efficiency and reducing emissions. The National Physical Laboratory (NPL) has developed shock tube facilities for the calibration of these sensors under the dynamic pressure conditions that they experience in use. Manufacturers of petrol ...

  • RAE Systems` New AutoRAE 2 Automatic Test and Calibration System Keeps Gas Monitors Accurate, Workers Safe, and Facilities in Compliance

    RAE Systems, the leading provider of connected gas and radiation detection solutions today announced its new AutoRAE 2 Automatic Test and Calibration System for the MultiRAE family of multi-threat monitors. The new system is an easy-to-use, yet powerful tool that helps organizations ...


    By RAE Systems by Honeywell

  • Humidity calibration in non-air gases at above-atmospheric pressures

    Many laboratories can only perform humidity calibrations in air at atmospheric pressure. However, industrial humidity measurements may be at high pressures, or in other gases. For best validity, humidity calibrations should ideally be in the gas medium of use, because the performance of some hygrometers can depend on gas species and pressure. Calibration ...

  • RAE Systems` New AutoRAE 2 Automatic Test and Calibration System Keeps Gas Monitors Accurate, Workers Safe, and Facilities in Compliance

    RAE Systems, the leading provider of connected gas and radiation detection solutions, today announced its new AutoRAE 2 Automatic Test and Calibration System for the MultiRAE family of multi-threat monitors. The new system is an easy-to-use, yet powerful tool that helps organizations keep ...


    By RAE Systems by Honeywell

  • New advances in air sampling and air flow calibration instruments

    F&J SPECIALTY PRODUCTS, INC. (F&J) has enhanced the usefulness of its “Digital Flowmeter” air sampling systems. F&J has implemented hardware and software modifications that enable a user to select either the reporting of (1) internationally recognized reference temperature (T) and pressure (P) conditions for gas volume values or (2) flow and volume values at local ambient conditions of barometric ...


    By F&J SPECIALTY PRODUCTS, INC.

  • Gas hazards in the oil, gas and petrochemical industries

    Although flammable and toxic gas hazards are generally well understood by operators, technicians and safety personnel in the oil, gas and petrochemical industries, continuous training and refreshment of knowledge is essential to avoid potential incidents caused by complacency. New personnel are often assigned work activities in potentially hazardous areas with only very limited training about gas ...

  • HPZAG: new zero-air generator for LCU

    We at IONICON believe that trace gas calibration is an essential part to support our claim to sell highest accuracy trace gas analyzers. Thus, we have invested in developing trace calibration systems for many years. With the now released high-pressure 0-air generator add-on, IONICON’s LCU has ...


    By Ionicon Analytik Ges.m.b.H.

  • The simple solution to gas detection

    The Kitagawa Gas Detector Tube System is used by industries worldwide to detect gases and vapours, simply and reliably, without the need for calibration effort or power supply. It’s as easy to use as 1-2-3! - Lightweight, compact and easy to carry - Simple to operate for all personnel - An accurate reading obtained in a few minutes - Can be used in flammable atmospheres - ...

  • Environics Offers Expanded Zero Air Generator Options

    Environics is pleased to announce the addition of expanded options for the Zero Air Generator. In addition to the powerful Stand-Alone model, the new pump-less model will produce ultra high purity zero grade air from an existing compressed air source. The Environics® Series 7000 Zero Air Generators are pure air generator systems that are capable of continuous delivery of up to 20 standard ...


    By Environics, Inc.

  • ASTM B810 - 01a(2011) standard test method for calibration of atmospheric corrosion test chambers by change in mass of copper coupons

    Electrical devices that contain electrical contacts generally contain some copper-based materials. Atmospheric corrosion of copper parts in such devices often occurs in service environments. A quantitative measure of the effect of a laboratory corrosion test on copper permits assessment of the severity of the test. In addition, corrosion tests may be defined in terms of their effect on copper; ...


    By ASTM International

  • On Gas Watch 24/7

    Biogas produced by the United Utilities anaerobic digestion sludge plant at Lancaster (Stodday) waste water-treatment runs a brand new 525kW combined heat and power (CHP) engine generating electricity and now operating 24/7. It joins an existing 325kW engine already in service for three years. In addition to biogas from the Stodday mesophilic anaerobic digester, a new enzymic hydrolyser increases ...


    By Geotech

  • Crowcon launches Gas-Tec Hydrocarbon Gas Detector for Leak Survey and Localisation

    Crowcon’s new Gas-Tec portable hydrocarbon gas detector is designed for rapid leak survey and localisation in applications such as gas distribution networks and landfill sites. Using Crowcon’s tried and tested flame ionisation chamber, the Gas-Tec also features next generation technology such as GPS, data and event logging. The new device allows survey teams to track progress and quickly pinpoint ...

  • Gas Detectors Protect Shale Gas Rigs From Hazardous Hydrocarbon Gas Leaks

    Oil and gas engineers responsible for hydraulic fracturing operations in the production of natural gas will find the Combustible Gas Detectors product lines available from General Monitors accurately sense potentially explosive hydrocarbon gas and alert crews in time to complete an orderly shutdown of the drilling rig. Pockets of combustible gas potentially escaping from shale drilling rig ...


    By General Monitors

  • New portable FTIR Gas Analyser detects almost any gas

    Gasmet Technologies Oy (Finland) has announced the launch of the DX4040 – a portable FTIR gas analyser that enables the field measurement of literally thousands of gases. The DX4040 is the second generation of the world’s first truly portable FTIR analyser which brought laboratory grade gas analysis into the field, and thereby brought the benefits of multiparameter FTIR gas analysis ...


    By Gasmet Technologies Oy

  • New portable FTIR Gas Analyser detects almost any gas

    Gasmet Technologies Oy (Finland) has announced the launch of the DX4040 – a portable FTIR gas analyser that enables the field measurement of literally thousands of gases. The DX4040 is the second generation of the world’s first truly portable FTIR analyser which brought laboratory grade gas analysis into the field, and thereby brought the benefits of multiparameter FTIR gas analysis ...


    By DECHEMA Ausstellungs-GmbH

  • New Gas Detection System for Ethylene

    Statox 501 Ethylen As pre- product for Polyethylene, ethanol, ethylen oxide, ethylene dichloride and many other final or intermediate products, ethylene (C2H4) is one of the most important products in petrochemical industries. It is a colourless gas with a sweetish smell. It is asphyxiant but not toxic. More important is that it is explosive in concentrations from 3,1 % (LEL) to 32 % ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you