calibration gas instrument News

  • Annual Gas Calibrations

    The OPSIS continuous emissions monitoring systems are the first in the world to be certified for extended gas calibration interval to 12 months. The recent tests show that our instruments are stable and keep very high quality. TÜV in Germany performed the long term drift tests, and the reports were finalized in June, 2015. ...


    By Opsis AB

  • Certification of calibration instruments for refrigeration

    Equipment Subject to Adjustment: The equipment that should be subject to periodic calibration are: Digital thermometer 4-way Manifold for R410A and R407c analog or digital Electronic balance; Digital Caliper / Meter AC Refrigerant gas leak detector The calibration process is the operation that the door, by comparison with a standard instrument , ...


    By Eurotec BT Srl

  • Instrument for the preparation of gas standards for mono and/or multipoints calibration: airmoCAL M

    Simple and accessible through its integra­ted software, airmoCAL M can be used to calibrate analytical instruments with standard bottles or permeation tubes. airmoCAL M can automatically prepare and inject gas for all kinds of analytical instruments. The principle of this device is based on mixing, dilution and injection of calibration gases, which can be useful in many applications, such as ...


    By Chromatotec Group

  • Optimize and Calibrate Your Combustion Gas Analyzer with E Instruments Before the New Heating Seasons Arrive

    With August waning on the eve of the solar eclipse, we are reminded again that summer is ending. Now, as the temperatures are cooling down, it is an excellent opportunity to recalibrate your E Instruments combustion gas analyzer and have it ready for the upcoming heating season. Professional and Quality Support At our ...

  • Model 150 Dynacalibrator® Calibration Gas Generator

    VICI Metronics’ Dynacalibrator® Model 150 is a constant temperature system designed to generate precise ppm or ppb concentrations of chemical compounds in a gas stream, using permeation devices as the trace gas source. It is used as a reference for the calibration of gas chromatography instruments and in other instruments that measure gas concentrations. This light-weight unit is a compact ...


    By VICI Metronics, Inc.

  • New advances in air sampling and air flow calibration instruments

    F&J SPECIALTY PRODUCTS, INC. (F&J) has enhanced the usefulness of its “Digital Flowmeter” air sampling systems. F&J has implemented hardware and software modifications that enable a user to select either the reporting of (1) internationally recognized reference temperature (T) and pressure (P) conditions for gas volume values or (2) flow and volume values at local ambient conditions of barometric ...


    By F&J SPECIALTY PRODUCTS, INC.

  • Sierra Instruments Releases New Gas Mixing Feature

    Sierra Instruments: Following in our commitment to drive innovation that creates value for customers, we are excited to announce the new gas mixing software package, now included with every QuadraTherm 640i/780i thermal mass flow meter on a beta trial basis. The “qMix™” software package is a unique feature of the Smart Interface Program (SIP) unlike anything available on the ...


    By Sierra Instruments, Inc.

  • Sierra Instruments Releases New Gas Mixing Feature

    Following in our commitment to drive innovation that creates value for customers, we are excited to announce the new gas mixing software package, now included with every QuadraTherm® 640i/780i thermal mass flow meter on a beta trial basis. The “qMix™” software package is a unique feature of the Smart Interface Program (SIP) unlike anything available on the market for ...


    By Sierra Instruments, Inc.

  • The high performances gas diluter/calibrator from LNI Swissgas

    LNI Swissgas in Geneva/Switzerland is proud to announce the launch of the new gas dilutor/calibrator: the Sonimix Sx7100. The Sx7100 is the 2nd generation of the previous Sx7000. It uses a combination of high precision Mass Flow Controllers (MFC’s) according to the norm ISO 6145-7. The goal of the Sx7100 is to reduce the amount of gas cylinders standards and generate any mixture ...


    By LNI Swissgas SA

  • UKAS Quality Award, a UK first - for Geotech in Gas Analyser Calibration

    Geotech has achieved UKAS accreditation for its calibration lab for its full range of landfill, biogas and waste to energy gas analysers. According to its UKAS assessor, “Geotech is the first manufacturer of portable gas analysers to obtain UKAS accreditation.” For Geotech gas analysers, already with MCERTS certification for the instrument, this important UKAS accreditation gives Geotech analyser ...

  • Sierra expands primary standard gas flow calibration systems & online store

    Sierra Instruments, a leading global mass flow meter and controller manufacturer, is pleased to announce the expansion of their primary gas flow calibration systems with the new economical CalTrak® 300 and 350. With increased portability and ease-of-use, now end-users can deliver precision flow calibration and validation, based on a primary standard, ...


    By Sierra Instruments, Inc.

  • Flare Flowmeter Validates Calibration

    Ideal For Refineries, PetroChemical Plants, Biogas, Offshore Platforms, Wellheads, Tank Farms, Fossil-Fuel Power Plants, Ship-to-Shore Offloading FCI has enhanced its GF03 Flare Flowmeter with an industry exclusive new VeriCal™ in-situ calibration verification kit. This new kit is designed to meet emerging extensions to environmental agency regulations that will require installed calibration ...

  • Dynamic calibration of pressure sensors for engines

    The characterisation of the pressure sensors used to develop the next generation of petrol and diesel engines is crucial to optimising their design, improving efficiency and reducing emissions. The National Physical Laboratory (NPL) has developed shock tube facilities for the calibration of these sensors under the dynamic pressure conditions that they experience in use. Manufacturers of petrol ...

  • Do You Know the Importance of bump testing & calibration?

    Gas detection technology has developed rapidly, bringing with it the introduction of “maintenance free” gas detectors. As a result, gas detection users have become more reliant on the sensor lasting longer, assuming that the gas detector will work properly without routine calibration. However, this isn’t the case ...


    By a1-cbiss

  • RAE Systems` New AutoRAE 2 Automatic Test and Calibration System Keeps Gas Monitors Accurate, Workers Safe, and Facilities in Compliance

    RAE Systems, the leading provider of connected gas and radiation detection solutions, today announced its new AutoRAE 2 Automatic Test and Calibration System for the MultiRAE family of multi-threat monitors. The new system is an easy-to-use, yet powerful tool that helps organizations keep ...


    By RAE Systems, Inc.

  • Gas hazards in the oil, gas and petrochemical industries

    Although flammable and toxic gas hazards are generally well understood by operators, technicians and safety personnel in the oil, gas and petrochemical industries, continuous training and refreshment of knowledge is essential to avoid potential incidents caused by complacency. New personnel are often assigned work activities in potentially hazardous areas with only very limited training about gas ...

  • New Gas Generator to check personal Gas Detectors

    Personnel working in chemical plants protect themselves with personal gas detectors from gas exposure. Gas leaks are very unlikely to occur, so the gas detector will always display „0“. An instrument displaying zero can do so for two reasons: a) The concentration is zero. b) The instrument is defective. For good reasons a daily check of the instrument is mandatory. It would ...

  • RAE Systems` New AutoRAE 2 Automatic Test and Calibration System Keeps Gas Monitors Accurate, Workers Safe, and Facilities in Compliance

    RAE Systems, the leading provider of connected gas and radiation detection solutions today announced its new AutoRAE 2 Automatic Test and Calibration System for the MultiRAE family of multi-threat monitors. The new system is an easy-to-use, yet powerful tool that helps organizations ...


    By RAE Systems, Inc.

  • When is gas potentially fatal?

    Following a move to new premises with custom built service facilities, Ashtead Technology has extended its RAE / Honeywell servicing capabilities to help customers ensure the accuracy and reliability of their gas detection activities. RAE Systems products are used in more than 120 countries by many of the world's leading corporations and government agencies. As such, enormous numbers of people ...


    By Ashtead Technology Ltd

  • New Calibration Extending Firmware (CEF) Added Feature

    Critical Environment Technologies Canada Inc. (CETCI) announces latest added feature, Calibration Extending Firmware (CEF), to all future developed products. CETCI introduced the CEF to the PET BACnet® transmitter in 2010. The new sensor CEF takes into account the aging of the sensors so that less frequent calibrations are acceptable in non-critical applications. With great success and ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you