calibration gas regulator News

  • Flare Flowmeter Validates Calibration

    Ideal For Refineries, PetroChemical Plants, Biogas, Offshore Platforms, Wellheads, Tank Farms, Fossil-Fuel Power Plants, Ship-to-Shore Offloading FCI has enhanced its GF03 Flare Flowmeter with an industry exclusive new VeriCal™ in-situ calibration verification kit. This new kit is designed to meet emerging extensions to environmental agency regulations that will require installed calibration ...

  • a1-cbiss Leak Detection Systems in Compliance with F-Gas Regulation

    Under new F-Gas proposals, a calculation of CO2 equivalent emissions will determine what type of gas leak detection is required. Sites using refrigeration now have to factor in the Global Warming Potential (GWP) of HFC’s compared to relative CO2 emissions. Sites that were before not under F-Gas regulations (had a charge of under 300kgs) are now required to have a fixed refrigerant gas leak ...


    By a1-cbiss

  • Emissions regulations theme for MCERTS 2011

    MCERTS 2011 has moved to the Telford International Centre and will take place on 30th and 31st March. The new location will accommodate growth in demand for the latest information on the regulations, techniques, standards and technologies that relate to emissions monitoring and gas detection. The event's visitors will be provided with help and advice across a broad range of subjects including the ...

  • RAE Systems` New AutoRAE 2 Automatic Test and Calibration System Keeps Gas Monitors Accurate, Workers Safe, and Facilities in Compliance

    RAE Systems, the leading provider of connected gas and radiation detection solutions, today announced its new AutoRAE 2 Automatic Test and Calibration System for the MultiRAE family of multi-threat monitors. The new system is an easy-to-use, yet powerful tool that helps organizations keep ...


    By RAE Systems by Honeywell

  • RAE Systems` New AutoRAE 2 Automatic Test and Calibration System Keeps Gas Monitors Accurate, Workers Safe, and Facilities in Compliance

    RAE Systems, the leading provider of connected gas and radiation detection solutions today announced its new AutoRAE 2 Automatic Test and Calibration System for the MultiRAE family of multi-threat monitors. The new system is an easy-to-use, yet powerful tool that helps organizations ...


    By RAE Systems by Honeywell

  • Easy TOC calibration for monitoring condensate and boiler feed water

    The calibration and validation of the TOC analysis calibration function in measuring ranges of 0-2,000 μg/l and lower is always a difficult task for the operator. The preparation of the calibration solution takes a lot of time and requires precision. LAR AG offers a newly developed and patent pending „gas calibration“ method to simplify this step. This latest invention will be presented at ...


    By LAR Process Analysers AG

  • New Gas Generator to check personal Gas Detectors

    Personnel working in chemical plants protect themselves with personal gas detectors from gas exposure. Gas leaks are very unlikely to occur, so the gas detector will always display „0“. An instrument displaying zero can do so for two reasons: a) The concentration is zero. b) The instrument is defective. For good reasons a daily check of the instrument is mandatory. It would ...

  • Crowcon launches Gas-Tec Hydrocarbon Gas Detector for Leak Survey and Localisation

    Crowcon’s new Gas-Tec portable hydrocarbon gas detector is designed for rapid leak survey and localisation in applications such as gas distribution networks and landfill sites. Using Crowcon’s tried and tested flame ionisation chamber, the Gas-Tec also features next generation technology such as GPS, data and event logging. The new device allows survey teams to track progress and quickly pinpoint ...

  • New Rental Fleet of Gas Detectors

    Ashtead Technology Rentals is launching a new fleet of instruments designed specifically to detect the many toxic and hazardous gases that can arise in drains and underground cavities. It is believed that over 80,000 new chemicals have been created in the last 50 years and many of them, unfortunately, end up in our drainage systems. A high proportion of these chemicals are toxic and anyone ...


    By Ashtead Technology Ltd

  • Innovation drives flue gas treatment

    Sharing a common goal, experts in emissions monitoring and emissions abatement have formed a working partnership to develop innovative new materials for treating pollutants in flue gas emissions. A business strategy with a heavy focus on innovation has enabled Lhoist, a family owned Belgian company, to become one of the world’s leading providers of Flue Gas ...


    By Gasmet Technologies Oy

  • Crowcon’s I-Test Ensures Gas Detectors are compliant

    Bump testing & calibration station tests and verifies Crowcon Gas-Pro detectors The new Crowcon I-Test bump testing and calibration station is designed specifically to test and verify that Crowcon’s Gas-Pro portable gas detectors are in a compliant state. Bump testing (gas testing) standards globally are becoming ever-stricter and the demands on fleet managers to control bump ...

  • Medical gas analyser gets thumbs up

    Still within 18 months of launch, the new Geotech G210 piped medical gas analyser is receiving positive user reviews. It is joined by the Geotech G200 ambient N2O gas analyser and the Geotech G100 CO2 incubator gas analyser. Geotech asked Ian Buckingham, Regional QC (MGPS) to review the Geotech G210 medical gas analyser supplied by GEM Scientific – which replaces the earlier Geotech FP99. ...


    By Geotech

  • Crowcon’s T3 Gas Tester Ensures Compliance

    The new T3 Gas Tester ensures Crowcon’s Tetra:3 (T3) portable, multi-gas detector complies with relevant national/regional safety regulations and individual company requirements. The device feeds the T3’s sensors a known concentration of gas, a process known as ‘bumping’, to ensure the sensors are working correctly. The way it works is simple: when a T3 is inserted into ...

  • CAI Introduces New Landfill Gas Systems

    ORANGE, CA - The California Analytical Instruments Landfill Gas Analysis System provides a highly accurate Methane and Oxygen analyzer housed in a NEMA 4 or 4X enclosure.  The enclosure is climate controlled for outdoor mounting and provides maximum stability in virtually any environment. The enclosure includes fittings for calibration gases, sample gas, and exhaust as well as solenoid ...

  • Gas analyser checks printers for compliance and safety

    A leading digital print technology company, Tonejet, recently purchased a portable VOC monitor from Ashtead Technology as part of an ongoing programme to ensure the protection of staff, and to assist in conformity with the ATEX Directive as part of the Machinery Directive 2006/42/EEC on CE-Marking. Technological developments in the print and coatings sectors have delivered a wide variety of ...


    By Ashtead Technology Ltd

  • Crowcon Showing its Latest Gas Detectors at EIC Connect Oil & Gas 2012

    Gas detection specialist Crowcon is showing its latest portable and fixed gas detectors for the oil and gas industry at EIC Connect Oil & Gas 2012 in Manchester between 27-28 November. Among the new products on show will be the ...

  • Dependable detection of refrigerant gases with Crowcon’s F-Gas Detector

    Fluorinated (Freon) gases, which include hydrofluorocarbons (HFCs), perfluorocarbons (PFCs), hydro-chlorofluorocarbons (HCFCs) and sulphur hexafluoride (SF6), are a family of man-made chemicals containing fluorine. These ’F-gases’ are extremely powerful greenhouse gases that trap heat in the atmosphere, contributing to global warming – most are between 1,000 and 20,000 times ...

  • The World’s Leading Gas Detection Products and Technology will be Displayed at WWEM 2010

    FOR IMMEDIATE RELEASE The organisers of WWEM, the world’s largest environmental monitoring event, have announced a new Gas Detection zone at the 2010 conference and exhibition, signalling coverage of the workplace environment for the first time. Traditionally focusing on environmental monitoring, the event will now also highlight airborne industrial hazards and risk assessment across all ...


  • SIR develops a NEW SERIES for Ambient Air Gas Analyzers

    SIR S.A., Madrid, Spain – SIR, an environmental monitoring instrumentation manufacturer, announced today that it is implementing state of the art distributed technologies as the basis for a new series of ambient air gas analyzers. By adapting advanced mobility technologies, SIR will be able to provide a rich and friendly working environment (color touch screen) together with maximized ...


    By CERTIO MEDIO AMBIENTE, S.L.

  • Crowcon ‘Clip’ and ‘Clip+’ single gas fixed-life monitors deliver compliance

    The new Crowcon Clip and Clip+ single gas monitors are simple to use and designed with one thing in mind: compliance with regulations and company procedures in the oil and gas industry. Intended for use in hazardous areas, they offer reliable and durable fixed life monitoring in a compact, lightweight and maintenance-free package. Application focused innovations allow hibernation, deliver ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you