calibration gas supply News

  • Sierra expands primary standard gas flow calibration systems & online store

    Sierra Instruments, a leading global mass flow meter and controller manufacturer, is pleased to announce the expansion of their primary gas flow calibration systems with the new economical CalTrak® 300 and 350. With increased portability and ease-of-use, now end-users can deliver precision flow calibration and validation, based on a primary standard, ...


    By Sierra Instruments, Inc.

  • Rotork CVA delivers improved control valve performance on European gas supply pipeline

    Rotork CVA electric control valve actuators are being installed during an upgrade programme on the pipeline network connecting Russia and Central Asia with Western Europe. Ukraine is an important part of this energy supply infrastructure which, in total, meets one third of Western Europe’s demand for natural gas. The Ukranian energy company Ukrgaz Energo has made it a priority to ...


    By Rotork plc

  • Gas Detectors Protect Shale Gas Rigs From Hazardous Hydrocarbon Gas Leaks

    Oil and gas engineers responsible for hydraulic fracturing operations in the production of natural gas will find the Combustible Gas Detectors product lines available from General Monitors accurately sense potentially explosive hydrocarbon gas and alert crews in time to complete an orderly shutdown of the drilling rig. Pockets of combustible gas potentially escaping from shale drilling rig ...


    By General Monitors

  • The simple solution to gas detection

    The Kitagawa Gas Detector Tube System is used by industries worldwide to detect gases and vapours, simply and reliably, without the need for calibration effort or power supply. It’s as easy to use as 1-2-3! - Lightweight, compact and easy to carry - Simple to operate for all personnel - An accurate reading obtained in a few minutes - Can be used in flammable atmospheres - ...

  • Extractive solution for measuring gas

    NEO Monitors launches their new turn-key extractive monitor, LaserGas R2P. The unit serves as sender and receiver of information for measuring gas and eliminates the need for two stacks. The monitor is easy to install, with a compact and strategic design made to fit in 19 inch racks. No other operations other than power supply, sample gas tubes and optional purge are required during ...


    By NEO Monitors AS

  • Extractive solution for measuring gas

    The monitor is easy to install, with a compact and strategic design made to fit in 19 inch racks. No other operations other than power supply, sample gas tubes and optional purge are required during installation. LaserGas R2P is optimized for extractive measurements in controlled environments. These kinds of measurements are typically used within chemical industry, petrochemical industry, ...


    By NEO Monitors AS

  • On Gas Watch 24/7

    Biogas produced by the United Utilities anaerobic digestion sludge plant at Lancaster (Stodday) waste water-treatment runs a brand new 525kW combined heat and power (CHP) engine generating electricity and now operating 24/7. It joins an existing 325kW engine already in service for three years. In addition to biogas from the Stodday mesophilic anaerobic digester, a new enzymic hydrolyser increases ...

  • Geotech sets the industry standard with ISO 17025 Calibration and five days servicing

    Geotech is a trusted manufacturer and supplier of portable and fixed gas analysers for a wide range of industries.  With our vast network of established international distributors, we are able to supply to and support our customers in over 60 countries worldwide. We offer a total support package for our entire product range from our UK-based Service Centre.  The in-house dedicated and ...

  • Crowcon launches Gas-Tec Hydrocarbon Gas Detector for Leak Survey and Localisation

    Crowcon’s new Gas-Tec portable hydrocarbon gas detector is designed for rapid leak survey and localisation in applications such as gas distribution networks and landfill sites. Using Crowcon’s tried and tested flame ionisation chamber, the Gas-Tec also features next generation technology such as GPS, data and event logging. The new device allows survey teams to track progress and quickly pinpoint ...

  • Refrigerant Gas Monitors Delivered to British MOD

    Wilks Enterprise, Inc., has delivered 26 portable refrigerant gas monitors to the British MOD through their agent in the UK, Quantitech Ltd. These monitors are being used onboard British submarines to help ensure safe air quality conditions. The Wilks InfraRan Refrigerant Specific Vapor Monitors that were supplied to the British MOD are portable infrared vapor analyzers. They are factory ...


    By Spectro Scientific

  • Buying a Gas Detector Can Be Confusing...

    What do you look for when searching to buy gas detection equipment? Gas detector, gas monitor, gas analyser or sometimes we even hear gas tester, however, there are many terms used to identify gas detection equipment. No matter what the confusion is, a1-cbiss can help. Whether it is uncertainty of what is needed, you could be ordering equipment on behalf of someone else, you may be struggling to ...


    By a1-cbiss

  • ET moves into gas detection tubes with Kitagawa

    ET is pleased to announce that from August 2011 it will be able to supply the Kitagawa Gas Detector Tube System. The Kitagawa Gas Detector Tube System is used by industries worldwide to detect gases and vapours simply and reliably, without the need for calibration effort or power supply. It’s as easy to use as 1-2-3! Choose from over 300 gas detector tubes from Ammonia to Xylene. The ...

  • Medical gas analyser gets thumbs up

    Still within 18 months of launch, the new Geotech G210 piped medical gas analyser is receiving positive user reviews. It is joined by the Geotech G200 ambient N2O gas analyser and the Geotech G100 CO2 incubator gas analyser. Geotech asked Ian Buckingham, Regional QC (MGPS) to review the Geotech G210 medical gas analyser supplied by GEM Scientific – which replaces the earlier Geotech FP99. ...

  • Innovation drives flue gas treatment

    Sharing a common goal, experts in emissions monitoring and emissions abatement have formed a working partnership to develop innovative new materials for treating pollutants in flue gas emissions. A business strategy with a heavy focus on innovation has enabled Lhoist, a family owned Belgian company, to become one of the world’s leading providers of Flue Gas ...


    By Gasmet Technologies Oy

  • Gas analyser checks printers for compliance and safety

    A leading digital print technology company, Tonejet, recently purchased a portable VOC monitor from Ashtead Technology as part of an ongoing programme to ensure the protection of staff, and to assist in conformity with the ATEX Directive as part of the Machinery Directive 2006/42/EEC on CE-Marking. Technological developments in the print and coatings sectors have delivered a wide variety of ...


    By Ashtead Technology Ltd

  • Crowcon’s T3 Gas Tester Ensures Compliance

    The new T3 Gas Tester ensures Crowcon’s Tetra:3 (T3) portable, multi-gas detector complies with relevant national/regional safety regulations and individual company requirements. The device feeds the T3’s sensors a known concentration of gas, a process known as ‘bumping’, to ensure the sensors are working correctly. The way it works is simple: when a T3 is inserted into ...

  • Geotech launches new portable landfill gas analyser

    The new Geotech GA5000 portable landfill gas analyser arrives in Jan 2012 with a colour-screen and a 3-year warranty. Up-to-the-minute as a new-generation analyser, the ...

  • New Compact IRmax Infrared Hydrocarbon Gas Detector from Crowcon

    Crowcon’s new IRmax is an ultra-compact infrared (IR) gas detector which delivers rapid, fail-safe detection of hydrocarbon gases with very low power consumption. Far smaller and lighter than comparable IR detectors, the IRmax is easy to install in even the most inaccessible locations. Featuring dual-wavelength IR sensor technology in a rugged 316 stainless steel package, IRmax is designed ...

  • Pellistor replacement IR flammable gas detector from Crowcon

    Crowcon’s innovative new IREX infrared (IR) flammable gas detector is designed to replace pellistor (catalytic bead) type flammable gas detectors, resulting in faster response times and greatly reduced zero drift. Capable of detecting methane, butane, propane and many other hydrocarbons, IREX is specifically designed for the oil, gas and petrochemical industries. Pellistor and some other IR type ...

  • New compact IRmax infrared hydrocarbon gas detector from Crowcon

    Crowcon’s new IRmax is an ultra-compact infrared (IR) gas detector which delivers rapid, fail-safe detection of hydrocarbon gases with very low power consumption. Far smaller and lighter than comparable IR detectors, the IRmax is easy to install in even the most inaccessible locations. Featuring dual-wavelength IR sensor technology in a rugged 316 stainless steel package, IRmax is designed ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you