calibration gas zero News

  • Edinburgh Sensors develops CO2 Zero Calibration Kit for Guardian NG Range

    At Edinburgh Sensors, we thrive to deliver bespoke solutions to our customers. Following a customer request, the CO2 Zero Calibration kit was developed, it allows less calibration gas to be used when checking our CO2 Guardian monitor range. The Guardian infrared monitors offer near-analyser quality continuous sampling, measurement and display of ...


    By Edinburgh Sensors Ltd

  • HPZAG: new zero-air generator for LCU

    We at IONICON believe that trace gas calibration is an essential part to support our claim to sell highest accuracy trace gas analyzers. Thus, we have invested in developing trace calibration systems for many years. With the now released high-pressure 0-air generator add-on, IONICON’s LCU has ...


    By Ionicon Analytik Ges.m.b.H.

  • Asia`s First Zero-Waste, Zero-Emission Business Forum in Singapore

    The United Nations Development Programme (UNDP) and Global Initiatives, Singapore will welcome over 600 business & sustainability leaders, senior government officials, UN agencies and NGOs from across the globe for the Responsible Business Forum on Sustainable Development (RBF) in Singapore on 22-24 November 2016. Large-scale conferences tend to be highly resource-intensive with ...


    By Global Initiatives

  • Environics Offers Expanded Zero Air Generator Options

    Environics is pleased to announce the addition of expanded options for the Zero Air Generator. In addition to the powerful Stand-Alone model, the new pump-less model will produce ultra high purity zero grade air from an existing compressed air source. The Environics® Series 7000 Zero Air Generators are pure air generator systems that are capable of continuous delivery of up to 20 standard ...


    By Environics, Inc.

  • Do You Know the Importance of bump testing & calibration?

    Gas detection technology has developed rapidly, bringing with it the introduction of “maintenance free” gas detectors. As a result, gas detection users have become more reliant on the sensor lasting longer, assuming that the gas detector will work properly without routine calibration. However, this isn’t the case ...


    By a1-cbiss

  • New Gas Generator to check personal Gas Detectors

    Personnel working in chemical plants protect themselves with personal gas detectors from gas exposure. Gas leaks are very unlikely to occur, so the gas detector will always display „0“. An instrument displaying zero can do so for two reasons: a) The concentration is zero. b) The instrument is defective. For good reasons a daily check of the instrument is mandatory. It would ...

  • Connah’s Quay opts for almost zero maintenance DO monitors

    Staff at Connah’s Quay Power Station have installed the latest luminescent optical dissolved oxygen (LDO) monitoring technology to minimise operational requirements whilst protecting the plant’s high value assets. An Orbisphere K1100 sensor from HACH now monitors DO continuously in the boiler water feed, requiring almost no maintenance or calibration. ...

  • Casella Monitor launches innovative zero air generator for air quality monitoring systems

    Casella Monitor introduces a time and cost-saving original product to its range of ambient monitoring equipment. Its new, cartridge-based, ZeroGen zero air generator removes the need for zero calibration gas cylinders when performing calibration checks on ambient air gas analyser systems. The cartridges are designed to be easily replaced each year, saving considerable time and ...


    By Casella

  • Extractive solution for measuring gas

    NEO Monitors launches their new turn-key extractive monitor, LaserGas R2P. The unit serves as sender and receiver of information for measuring gas and eliminates the need for two stacks. The monitor is easy to install, with a compact and strategic design made to fit in 19 inch racks. No other operations other than power supply, sample gas tubes and optional purge are required during ...


    By NEO Monitors AS

  • Extractive solution for measuring gas

    The monitor is easy to install, with a compact and strategic design made to fit in 19 inch racks. No other operations other than power supply, sample gas tubes and optional purge are required during installation. LaserGas R2P is optimized for extractive measurements in controlled environments. These kinds of measurements are typically used within chemical industry, petrochemical industry, ...


    By NEO Monitors AS

  • On Gas Watch 24/7

    Biogas produced by the United Utilities anaerobic digestion sludge plant at Lancaster (Stodday) waste water-treatment runs a brand new 525kW combined heat and power (CHP) engine generating electricity and now operating 24/7. It joins an existing 325kW engine already in service for three years. In addition to biogas from the Stodday mesophilic anaerobic digester, a new enzymic hydrolyser increases ...

  • New portable FTIR Gas Analyser detects almost any gas

    Gasmet Technologies Oy (Finland) has announced the launch of the DX4040 – a portable FTIR gas analyser that enables the field measurement of literally thousands of gases. The DX4040 is the second generation of the world’s first truly portable FTIR analyser which brought laboratory grade gas analysis into the field, and thereby brought the benefits of multiparameter FTIR gas analysis ...


    By DECHEMA Ausstellungs-GmbH

  • New portable FTIR Gas Analyser detects almost any gas

    Gasmet Technologies Oy (Finland) has announced the launch of the DX4040 – a portable FTIR gas analyser that enables the field measurement of literally thousands of gases. The DX4040 is the second generation of the world’s first truly portable FTIR analyser which brought laboratory grade gas analysis into the field, and thereby brought the benefits of multiparameter FTIR gas analysis ...


    By Gasmet Technologies Oy

  • Environics Series 9100 Computerized Ambient Monitoring Calibration System Dilution Range Expanded

    Environics Inc, a world leader in computerized gas flow instrumentation, headquartered in Tolland, Connecticut, is pleased to announce that the Series 9100 Computerized Ambient Monitoring Calibration System has been modified to support an additional thermal mass flow controller (MFC). Now, like our Series 6100 and Series 6103 systems, the Series 9100 can house up to three (3) MFCs, giving the ...


    By Environics, Inc.

  • Geotech sets the industry standard with ISO 17025 Calibration and five days servicing

    Geotech is a trusted manufacturer and supplier of portable and fixed gas analysers for a wide range of industries.  With our vast network of established international distributors, we are able to supply to and support our customers in over 60 countries worldwide. We offer a total support package for our entire product range from our UK-based Service Centre.  The in-house dedicated and ...

  • Innovation drives flue gas treatment

    Sharing a common goal, experts in emissions monitoring and emissions abatement have formed a working partnership to develop innovative new materials for treating pollutants in flue gas emissions. A business strategy with a heavy focus on innovation has enabled Lhoist, a family owned Belgian company, to become one of the world’s leading providers of Flue Gas ...


    By Gasmet Technologies Oy

  • Addressable Gas Detection Leads to Large Cable Savings

    SINGLE CABLE SOLUTIONS FOR GAS DETECTION Cabling Costs and Space Issues Why is it that in today’s digital age many Gas Detection Systems still need to be installed with individual analogue loops from control to sensor, each requiring a separate 3 or 4 core cable connection. As you increase the size of a Gas Detection System so the corresponding loops increase by that factor of 3 or 4. ...

  • CO2 Gas Sensor tailored to customer needs

    We were recently delighted to help one of our customers in the field of Modified Atmosphere Packaging (MAF) who was in need of a bespoke CO2 gas sensor solution. He was seeking a gas sensor with a rapid response, low lag, and low noise output. Following consultation, we were able to develop the New 0-100% ...


    By Edinburgh Sensors Ltd

  • Pellistor replacement IR flammable gas detector from Crowcon

    Crowcon’s innovative new IREX infrared (IR) flammable gas detector is designed to replace pellistor (catalytic bead) type flammable gas detectors, resulting in faster response times and greatly reduced zero drift. Capable of detecting methane, butane, propane and many other hydrocarbons, IREX is specifically designed for the oil, gas and petrochemical industries. Pellistor and some other IR type ...

  • PureAire O2 Monitor for Food Manufacturing Tunnel/Freezers with N2 and CO2: Using a 10 Year No Calibration Sensor

    For flash freezing nothing beats a liquid nitrogen or carbon dioxide immersion or tunnel style freezer for efficiency, overall performance, and cost savings. If you haven't yet switched to an immersion freezer, doing so now could position you to better compete in your market segment and save money over time. Learn more about why these freezers are a must for frozen food manufacturers. Immersion ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you