calibration instrument News

  • Certification of calibration instruments for refrigeration

    Equipment Subject to Adjustment: The equipment that should be subject to periodic calibration are: Digital thermometer 4-way Manifold for R410A and R407c analog or digital Electronic balance; Digital Caliper / Meter AC Refrigerant gas leak detector The calibration process is the operation that the door, by comparison with a standard instrument , ...


    By Eurotec BT Srl

  • Calibrating and servicing noise measurement instruments is not a luxury

    Why have your noise measurement calibrated and serviced? Pulsar Instruments plc, the fastest growing manufacturer of noise measurement products in the world, is highlighting the importance of returning any precision instruments bought from them for regular calibration and servicing. Buying a new noise measurement instrument is an investment.  As such, it is ...


    By Pulsar Instruments plc

  • Huge demand for PM all monitor

    Palas, the German manufacturer of particulate monitoring instruments, is expanding production to cope with demand for its fine particulate monitor, the Fidas® 200, which is distributed in the UK by Air Monitors. In the following article Jim Mills explains why Air Monitors is being kept busy by the demand for this exciting new technology. PM monitoring – the ultimate ...


    By Air Monitors Ltd.

  • CE Compliant Products - Air Sampling and Airflow Calibration Instruments

    Untitled Document F&J SPECIALTY PRODUCTS, INC. has obtained confirmation from a Nationally Recognized Testing Laboratory (NRTL) that a large segment of its air sampling and ...


    By F&J SPECIALTY PRODUCTS, INC.

  • AMETEK Land Instruments celebrates 45th anniversary of UKAS calibration laboratory

    AMETEK Land Instruments, based in Sheffield, is celebrating the 45th anniversary of its UKAS accredited infrared temperature calibration laboratory. It was the first UKAS laboratory to be accredited, back in 1970, for the issue of Calibration Certificates for thermal measurements and also the first to be accredited for the issue of certificates that met the requirements ...


    By AMETEK Land

  • New advances in air sampling and air flow calibration instruments

    F&J SPECIALTY PRODUCTS, INC. (F&J) has enhanced the usefulness of its “Digital Flowmeter” air sampling systems. F&J has implemented hardware and software modifications that enable a user to select either the reporting of (1) internationally recognized reference temperature (T) and pressure (P) conditions for gas volume values or (2) flow and volume values at local ambient conditions of barometric ...


    By F&J SPECIALTY PRODUCTS, INC.

  • Instrument for the preparation of gas standards for mono and/or multipoints calibration: airmoCAL M

    Simple and accessible through its integra­ted software, airmoCAL M can be used to calibrate analytical instruments with standard bottles or permeation tubes. airmoCAL M can automatically prepare and inject gas for all kinds of analytical instruments. The principle of this device is based on mixing, dilution and injection of calibration gases, which can be useful in many applications, such as ...


    By Chromatotec Group

  • Agilent Technologies opens seventh calibration center in americas for electronic measurement instruments

    Agilent Technologies Inc. (NYSE: A) today announced the opening of a new calibration center in Sunrise, Fla. Now owners of Agilent electronic measurement instruments in that area can receive true local OEM calibrations, such as actual measurements performed using OEM procedures for every data-sheet specification, each time they use the center. "We've invested in this new calibration center so ...


    By Agilent Technologies, Inc.

  • CPC6000 Precision pressure controller - The easy-to-use pressure calibration instrument

    The CPC6000 pneumatic precision pressure controller is impressive, not only for its outstanding technical specification, but also for its excellent price/performance ratio. Due to the modular construction of the pneumatic precision pressure controller, it is possible to operate the instrument with either one or two control channels. Each channel has its own control unit with up to two ...


    By WIKA Instruments Ltd.

  • Portable Ozone Calibrator

    2B Technologies, Inc. has launched its newest innovation, the Model 306 Ozone Calibration Source™ (OCS™). This state-of-the-art instrument is a completely portable (9x21x29 cm) and lightweight (2.6 kg) source of ozone that allows calibration of any ozone monitor regardless of manufacturer. The OCS™ scrubs ozone and water vapor from ambient air and produces any mixing ratio of ozone in the range ...


    By 2B Technologies

  • The new HygroGen calibrator

    The HygroGen is a self-contained transportable humidity and temperature calibrator that enables users and calibration engineers to accurately and rapidly calibrate any type of humidity instrument. The launch of the second generation Airchip3000 based calibrator takes transportable humidity calibration to a new level of performance and ease of use. Rapid and precise Stabilisation of relative ...


    By ROTRONIC AG

  • Flare Flowmeter Validates Calibration

    Ideal For Refineries, PetroChemical Plants, Biogas, Offshore Platforms, Wellheads, Tank Farms, Fossil-Fuel Power Plants, Ship-to-Shore Offloading FCI has enhanced its GF03 Flare Flowmeter with an industry exclusive new VeriCal™ in-situ calibration verification kit. This new kit is designed to meet emerging extensions to environmental agency regulations that will require installed calibration ...

  • Need a UKAS calibrated Thermometer?

    UKAS calibration offers an exceptional level of certainty to your measurements, and means you can be sure the equipment you are using is accurate. Hanna Instruments can now offer a handheld digital thermometer which comes complete with UKAS calibration certificate and at a lower price than you might think… The ...


    By Camlab Limited

  • Oxford Instruments America calibration laboratory is now ISO 17025 accredited through A2LA!

    Oxford Instruments America, Inc. is pleased to announce our calibration laboratory is now accredited to ISO/ IEC 17025:2005 through the American Association for Laboratory Accreditation (A2LA). This new accreditation in our Concord MA laboratory complements our existing A2LA compliance in our Scotts Valley, California laboratory, where we have been compliant with the A2LA accreditation for many ...


    By Oxford Instruments plc

  • Agilent Technologies expands mobile calibration teams to deliver on-site service for Americas electronic measurement instruments

    Agilent Technologies Inc. (NYSE: A) today announced the deployment of its 14th mobile calibration team, located in Colorado Spring, Colo. Customers in the Americas with Agilent electronic measurement instruments can get true OEM calibrations (measurements ...


    By Agilent Technologies, Inc.

  • Pulsar Instruments Models 105/106 Acoustic Calibrators help improve noise measurement

    Those two products from Pulsar Instruments plc. , the Model 105 and Model 106, can lead to a significant improvement in noise measurements.  Acoustic calibrators are an essential piece of equipment in that they set and check the ...


    By Pulsar Instruments plc

  • XA1000 in use of Calibration Laboratory in Zagreb

    MTB inzenjering d.o.o. is a trade partner of our industrial measurement instruments in Zagreb, Croatia and our partner for ten years already. They are expanding their own laboratory (BMB laboratory) for calibration of relative humidity devices. For this, they recently needed a new, highly precise hand held device for reference measurements. They decided to rely on the XA1000 hand held device from ...

  • Colorimeter chlorine analyser calibration instrumen

    The new P334 Colorimeter instrument provides a simple, reliable solution for calibrating on-line chlorine analysers in compliance with US EPA Method 334.0, published in November 2009. The hand-held Colorimeter includes an easy to follow step-by-step procedure guide; the easiest to use National Institute of Standards and Technology (NIST) traceable standards; and a certificate of calibration from ...

  • Dynamic calibration of pressure sensors for engines

    The characterisation of the pressure sensors used to develop the next generation of petrol and diesel engines is crucial to optimising their design, improving efficiency and reducing emissions. The National Physical Laboratory (NPL) has developed shock tube facilities for the calibration of these sensors under the dynamic pressure conditions that they experience in use. Manufacturers of petrol ...

  • Make calibration one of your New Year’s resolutions

    This time of year it’s traditional for individuals to make New Year’s resolutions about their health regime with a full body MOT.  Cirrus Research, noise measurement specialist, is advising owners of noise measurement equipment to take the same approach by ensuring that their instruments are calibrated regularly by an approved laboratory.  This will help verify that the ...


    By Cirrus Research plc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you