calibration kit News

  • Flare Flowmeter Validates Calibration

    Ideal For Refineries, PetroChemical Plants, Biogas, Offshore Platforms, Wellheads, Tank Farms, Fossil-Fuel Power Plants, Ship-to-Shore Offloading FCI has enhanced its GF03 Flare Flowmeter with an industry exclusive new VeriCal™ in-situ calibration verification kit. This new kit is designed to meet emerging extensions to environmental agency regulations that will require installed calibration ...

  • Colorimeter chlorine analyser calibration instrumen

    The new P334 Colorimeter instrument provides a simple, reliable solution for calibrating on-line chlorine analysers in compliance with US EPA Method 334.0, published in November 2009. The hand-held Colorimeter includes an easy to follow step-by-step procedure guide; the easiest to use National Institute of Standards and Technology (NIST) traceable standards; and a certificate of calibration from ...

  • Make Linearity Testing Easier with a Gas Dilution Kit

    The principle of a linearity test is to check that the gas analyser system is ‘linear’. The linearity shall be calculated and tested using the procedure given in annex B of the standard EN14181. Linearity tests can be performed by Service Engineer, Site Engineer or Stack Testing House, although must be deemed competent to perform the checks. The reference material concentrations shall ...


    By a1-cbiss

  • Renishaw unveils the new XM-60 multi-axis calibrator

    Renishaw, the world-leading metrology specialist, will exhibit its new XM-60 multi-axis calibrator at IMTS 2016, Chicago, USA and AMB 2016, Stuttgart, Germany. The XM-60 is capable of measuring all six degrees of freedom from a single set-up, in any orientation for linear axes. It offers significant improvement in simplicity and time ...


    By Renishaw plc

  • A new Safety Officers’ Noise Measurement Kit

    Cirrus Research plc announces the introduction of a new range of Safety Officers’ Noise Measurement Kits which present a complete measurement solution for Occupational and Environmental noise. This new range of noise measurement solutions will be launched at the Safety & Health Expo 2007. Cirrus Research plc will be on stand G52. After many requests, Cirrus Research plc have combined their most ...


    By Cirrus Research plc

  • How to Set Up a Perimeter Monitoring Kit

    It’s that time of year again: construction season!  Which means perimeter monitoring has again become necessary to measure worker exposures to noise, dust, gas emissions, and provide documentation that you’ve implemented procedures to keep the surrounding community safe from these issues. RAECO Rents perimeter ...


    By Raeco Rents

  • Introducing Spectroquant® test kits for Molybdenum and Oxygen scavengers

    Test your boiler and cooling water – keep your systems from corroding. All our Spectroquant® test kits offer unparalleled ease and precision and replace costly, laborious lab methods. We are glad to announce two new additions to our photometric product range for boiler and cooling water systems. The new kits test the parameters “molybdenum” and “oxygen scavengers.” What can you expect? Molybdenum ...


    By Merck Millipore

  • Onset introduces new weather station starter kit

    Onset Computer Corporation, the world’s leading supplier of data loggers, today introduced the HOBO Weather Station Starter Kit, a new weather monitoring kit that combines the company’s most rugged, research-grade data logging weather station with a suite of plug-and-play weather sensors. Ideal for agricultural research, ecology studies, wind monitoring, and other applications, the new weather ...


    By Onset Computer Corporation

  • Casella offers a second noise dosimeter free with noise at work kit

      Casella CEL has announced a limited special offer on its noise at work kit, representing a saving of up to £1400. The kit helps the busy health and safety professional ensure compliance with the specific requirements of the Control of Noise at Work Regulations 2005 and consists of: CEL-620 Sound Level Meter, a ...


    By Casella

  • Pulsar Instruments Models 105/106 Acoustic Calibrators help improve noise measurement

    Those two products from Pulsar Instruments plc. , the Model 105 and Model 106, can lead to a significant improvement in noise measurements.  Acoustic calibrators are an essential piece of equipment in that they set and check the ...


    By Pulsar Instruments plc

  • Larson Davis Launches New Software Development Kit (SDK) with Support for Microsoft® and Linux®

    Larson Davis, a division of PCB Piezotronics, is pleased to announce an upgrade to the Larson Davis SLM Software Development Kit (SDK). With this new SDK, Larson Davis improves its open interface and expands support of acoustic engineers and consultants who need to develop custom applications or interface with other systems. The new SDK is available to support application development on ...

  • Technika Expands Water Quality Testing Product Line by Introducing the eXact™ EZ Meter Kit.

    Scottsdale, AZ October 8, 2007 --Technika announces the addition of the new eXact™ EZ meter kit to its Water Quality testing product line. This affordable, water-resistant, meter kit is designed to give fast water chemistry results for residential, commercial, municipal and environmental water quality testing. The eXact EZ meter kit comes with eXact™ EZ Strips, which can be used for EPA Compliant ...


    By Sper Scientific

  • Pulsar Noise Meter Outdoor kit helps protect your Sound Level Meter

    Pulsar Instruments Plc. offer the option of converting your hand held instruments into either short term or longer term semi-permanent noise monitors.  Environmental noise monitoring usually takes place outside and the sound level meter is therefore subjected to various weather conditions. Rain or even heavy fog, can make using a normal sound level meter outside for long periods impractical, ...


    By Pulsar Instruments plc

  • Agilent Technologies announces availability of USB-IF-certified fixture kits for USB 3.0 compliance tests

    Agilent Technologies Inc. (NYSE: A) today announced the availability of fixture kits for USB 3.0 connectors and cable-assembly compliance tests. The fixture kits enable design engineers to connect test equipment to USB 3.0 connectors and cable assemblies used in portable consumer electronic devices so they can test for potential compliance issues. The fixture kits are used in conjunction with the ...


    By Agilent Technologies, Inc.

  • Casella helps to keep the peace in the city with its noise nuisance recorder kits with Cel-632 Sound Level Meter Technology

    International construction services company, ISG Plc, is using Noise Nuisance Recorder (NNR) kits from Casella CEL (www.casellameasurement.com; 01234 844100) to monitor noise levels on a £16 million project to refurbish and upgrade City Tower in Basinghall Street, London. The refurbishment and remodelling contract encompasses work across 10 floors of ...


    By Casella

  • New High Temeprature ReadyCals

    Latest edition to the PSS ReadyCal family - Fast and easy HT-GPC calibration The calibration of a GPC-system is time-consuming as it requires the accurate weighing out of a large number of different molar mass reference materials for every single calibration. PSS ReadyCals allow for the rapid preparation of reproducible calibration curves without the inconvenience of individually weighing ...

  • Fingerprinting method identifies petroleum contamination age and type

    Sitelab's fingerprinting procedure helps to identify the age or type of contamination on its clients' site at a fraction of the cost compared to conventional laboratory forensic testing. Field screening fingerprinting procedure Extract and prepare samples in solvent using Sitelab test kits; soil, sediment, water or oil (NAPL) samples can be analyzed. Test for GRO (BTEX): ...


    By Sitelab Corporation

  • Every pipette has a story to tell with RFID

    Is the pipette calibrated? When is it due for service? Who does it belong to? These questions can immediately be answered thanks to Radio Frequency Identification (RFID). Rainin’s XLS pipettes, the RFID kit and Lab-X Direct Pipette Scan software are all you need to review everything about your XLS pipettes directly on a PC screen. If you ever wonder: When was this pipette last ...


    By Mettler - Toledo Int. Inc

  • OIML Class E1 weights now available from Rice Lake

    Rice Lake Weighing Systems is pleased to announce expanded laboratory capabilities that will accommodate the very highest level of precision—OIML Class E1. Many pharmaceutical companies, chemical labs and calibration houses require the E1 tolerance for their calibration standards. In order to supply customers with the necessary precision, Rice Lake invested in additional equipment to meet ...


    By Rice Lake Weighing Systems

  • Colouring sound level readings from Casella CEL Ltd

    The UK's leading manufacturer of environmental monitoring equipment has developed a colour-coded display system for sound level meters which simplifies their use and reduces the risk of misinterpreting data. Casella CEL has now launched the all new 620 series of pocket sized meters which incorporate the high resolution colour display into the smallest and easiest to use sound level meter on the ...


    By Casella

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you