calibration laboratory News

  • XA1000 in use of Calibration Laboratory in Zagreb

    MTB inzenjering d.o.o. is a trade partner of our industrial measurement instruments in Zagreb, Croatia and our partner for ten years already. They are expanding their own laboratory (BMB laboratory) for calibration of relative humidity devices. For this, they recently needed a new, highly precise hand held device for reference measurements. They decided to rely on the XA1000 hand held device from ...

  • AMETEK Land Instruments celebrates 45th anniversary of UKAS calibration laboratory

    AMETEK Land Instruments, based in Sheffield, is celebrating the 45th anniversary of its UKAS accredited infrared temperature calibration laboratory. It was the first UKAS laboratory to be accredited, back in 1970, for the issue of Calibration Certificates for thermal measurements and also the first to be accredited for the issue of certificates that met the requirements ...


    By AMETEK Land

  • Laboratory Conference

    Kuwait Laboratory Technology Conference is a multi-tracked conference and tradeshow for the laboratory industry, to take place on 30th November and 1st December 2010 in Kuwait. It will cover a diverse range of subjects relating to the science and technology used in medical and non-medical laboratories, as well as their management. It will provide scientists, technicians, laboratory managers and ...

  • EN ISO 17025 calibration

    On rare occasions, e.g. when a device is used for measurement of emissions of industrial objects (and based on that a fine for environment pollution is calculated) the device must hold a valid calibration certificate, issued by authorised, accredited laboratory. madur co-operates with accredited laboratory, therefore it is possible to deliver any device with the mentioned ISO 17025 certificate. ...


    By madur Polska Sp. z o.o.

  • Certification of calibration instruments for refrigeration

    Equipment Subject to Adjustment: The equipment that should be subject to periodic calibration are: Digital thermometer 4-way Manifold for R410A and R407c analog or digital Electronic balance; Digital Caliper / Meter AC Refrigerant gas leak detector The calibration process is the operation that the door, by comparison with a standard instrument , ...


    By Eurotec BT Srl

  • The new HygroGen calibrator

    The HygroGen is a self-contained transportable humidity and temperature calibrator that enables users and calibration engineers to accurately and rapidly calibrate any type of humidity instrument. The launch of the second generation Airchip3000 based calibrator takes transportable humidity calibration to a new level of performance and ease of use. Rapid and precise Stabilisation of relative ...


    By ROTRONIC AG

  • Oxford Instruments America calibration laboratory is now ISO 17025 accredited through A2LA!

    Oxford Instruments America, Inc. is pleased to announce our calibration laboratory is now accredited to ISO/ IEC 17025:2005 through the American Association for Laboratory Accreditation (A2LA). This new accreditation in our Concord MA laboratory complements our existing A2LA compliance in our Scotts Valley, California laboratory, where we have been compliant with the A2LA accreditation for many ...


    By Oxford Instruments plc

  • Dynamic calibration of pressure sensors for engines

    The characterisation of the pressure sensors used to develop the next generation of petrol and diesel engines is crucial to optimising their design, improving efficiency and reducing emissions. The National Physical Laboratory (NPL) has developed shock tube facilities for the calibration of these sensors under the dynamic pressure conditions that they experience in use. Manufacturers of petrol ...

  • New Acoustic Calibrators from Cirrus Research plc

    Cirrus Research plc announces the introduction of a new range of Acoustic Calibrators. Key features of the new CR:514 and CR:515 are: > IEC 60942:2003 Class 2 & Class 1 Performance > 94dB Sound Pressure Level Output > Suitable for use with ½” microphone capsules > Automatic power switch off with user override giving long battery life > Robust case with ergonomic design The ...


    By Cirrus Research plc

  • On-Site Calibration with weather sensors from Lufft

    Sometimes it is not possible to renounce for your meteorological stations for several days to ship them for calibration to a calibration laboratory. Nevertheless, the measurement technique should be calibrated at least every two years – The solution is on-site calibration! Two examples of such service I would like to present in more detail in this blog post: Lufft ...

  • Make calibration one of your New Year’s resolutions

    This time of year it’s traditional for individuals to make New Year’s resolutions about their health regime with a full body MOT.  Cirrus Research, noise measurement specialist, is advising owners of noise measurement equipment to take the same approach by ensuring that their instruments are calibrated regularly by an approved laboratory.  This will help verify that the ...


    By Cirrus Research plc

  • Matrix Gemini LIMS for Environmental Laboratories

    Autoscribe Informatics has published a useful downloadable 9 page guide: Matrix Gemini LIMS for Environmental Labs highlighting the use of its Matrix Gemini LIMS (Laboratory Information Management System) for the testing of water, air, gas, soil, and/or leachate samples in environmental laboratories. This new publication highlights how Matrix can be readily configured to accommodate varying local ...


    By Autoscribe Informatics

  • MAX300 LG: Quantitative Laboratory Gas Analyser

    With immediate effect Henniker Scientific Ltd. of Warrington, England announce the release of the MAX300 LG Quantitative Gas Analyser. Quantitative Gas Analysis, performed with precision, accuracy and repeatability, demands an analyser with exceptional stability & repeatability characteristics coupled with an inlet system and analysis methods that can handle routine calibrations and ...


  • Product Highlight: The TD-3100 Laboratory Fluorometer

    The TD-3100 is a low cost benchtop instrument for analyzing hydrocarbons in water and soil. Developed as an alternative to industry standard laboratory methods. Measures samples with solvent extraction methods or non-extraction within solubility limits. Some of the TD-3100 features include: Compaatible with all popular ...

  • Neptune - LIMS for all water testing laboratories

    Neptune - LIMS -The Modern Solution for all Water Testing Laboratories Laboratories that support water treatment plants have long discovered the benefits of Laboratory Information Management Systems - LIMS. Today many laboratories are looking to replace their earlier systems with ones that are easier to support, more friendly to use and that can be connected easily with other plant computer ...


    By Autoscribe Informatics

  • AMETEK Land India secures NABL calibration lab accreditation

    The AMETEK Land India laboratory, which was established and began calibration and repair operations in 2011, is the first OEM (original equipment manufacturer)-approved facility to receive NABL accreditation. It is accredited to offer thermal calibration in the range of 0ºC to1600ºC for tests carried out in-house and 0ºC to1200ºC for on-site calibrations. In addition, the ...


    By AMETEK Land

  • Lund University opens Vibration and Acoustic Laboratory

    The Vibration and Acoustic Laboratory will contain new equipment including data acquisition hardware, analysis software, electrodynamic shakers and impact hammers. The laboratory will enable the Future Energy Initiative - a project to create a unique Scandinavian centre for research into clean energy solutions. It will help to enable working in new cross-disciplined areas, with emphasis on ...

  • CE Compliant Products - Air Sampling and Airflow Calibration Instruments

    Untitled Document F&J SPECIALTY PRODUCTS, INC. has obtained confirmation from a Nationally Recognized Testing Laboratory (NRTL) that a large segment of its air sampling and ...


    By F&J SPECIALTY PRODUCTS, INC.

  • Indonesian laboratory helps reduce road noise

    Pusarpedal is an environmental laboratory under the Indonesian Environment Ministry, performing environmental quality testing and monitoring. It was established as an environment reference laboratory with grants from the Japanese government in 1993. It then received the testing laboratory accreditation certificate from the National Accreditation Committee (KAN) on February 7, 2001. Pusarpedal ...

  • Larson Davis announces the New PRM2103 outdoor preamplifier with automatic calibration check

    The Larson Davis PRM2103 Outdoor Preamplifier is designed for use with the Model 831 Sound Level Meter, the 377B02 microphone, and an environmental shroud for portable or permanent outdoor use in a wide range of weather conditions. The PRM2103 combines the cost savings of a standard preamplifier with features for unattended monitoring and an inexpensive shroud to create a product that is ideal ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you