calibration source News

  • Huge demand for PM all monitor

    Palas, the German manufacturer of particulate monitoring instruments, is expanding production to cope with demand for its fine particulate monitor, the Fidas® 200, which is distributed in the UK by Air Monitors. In the following article Jim Mills explains why Air Monitors is being kept busy by the demand for this exciting new technology. PM monitoring – the ultimate ...


    By Air Monitors Ltd.

  • Portable Ozone Calibrator

    2B Technologies, Inc. has launched its newest innovation, the Model 306 Ozone Calibration Source™ (OCS™). This state-of-the-art instrument is a completely portable (9x21x29 cm) and lightweight (2.6 kg) source of ozone that allows calibration of any ozone monitor regardless of manufacturer. The OCS™ scrubs ozone and water vapor from ambient air and produces any mixing ratio of ozone in the range ...


    By 2B Technologies

  • The new HygroGen calibrator

    The HygroGen is a self-contained transportable humidity and temperature calibrator that enables users and calibration engineers to accurately and rapidly calibrate any type of humidity instrument. The launch of the second generation Airchip3000 based calibrator takes transportable humidity calibration to a new level of performance and ease of use. Rapid and precise Stabilisation of relative ...


    By ROTRONIC AG

  • Gas Dilution Calibration System

    Ecotech is pleased to announce the release of the new GasCal 1100 Gas Dilution Calibration System. The GasCal 1100 is designed using the latest technology to precisely control the dilution of gas standards for calibration of ambient air and source emission monitoring analysers. The calibrator may be connected with up to 4 external gas cylinders for precise dilution of these gas standards with ...


    By Ecotech Pty Ltd

  • Dynamic calibration of pressure sensors for engines

    The characterisation of the pressure sensors used to develop the next generation of petrol and diesel engines is crucial to optimising their design, improving efficiency and reducing emissions. The National Physical Laboratory (NPL) has developed shock tube facilities for the calibration of these sensors under the dynamic pressure conditions that they experience in use. Manufacturers of petrol ...

  • Model 150 Dynacalibrator® Calibration Gas Generator

    VICI Metronics’ Dynacalibrator® Model 150 is a constant temperature system designed to generate precise ppm or ppb concentrations of chemical compounds in a gas stream, using permeation devices as the trace gas source. It is used as a reference for the calibration of gas chromatography instruments and in other instruments that measure gas concentrations. This light-weight unit is a compact ...


    By VICI Metronics

  • New Products: Model 2010D, 5.25` Rack Mount Dilution Calibrator

    For those of you that are familiar with Sabio"s Model 2010 Portable Gas Dilution Calibrator, the unit has recently been upgraded to reach it"s full potential. The Model 2010 has increased in terms of the number of source valves available, gas outputs, digital I/O, external valve driver and the ability to be retrofitted into the new 5.25" rack mount u-chassis. ...

  • The high performances gas diluter/calibrator from LNI Swissgas

    LNI Swissgas in Geneva/Switzerland is proud to announce the launch of the new gas dilutor/calibrator: the Sonimix Sx7100. The Sx7100 is the 2nd generation of the previous Sx7000. It uses a combination of high precision Mass Flow Controllers (MFC’s) according to the norm ISO 6145-7. The goal of the Sx7100 is to reduce the amount of gas cylinders standards and generate any mixture ...


    By LNI Swissgas

  • AMETEK Land Instruments celebrates 45th anniversary of UKAS calibration laboratory

    AMETEK Land Instruments, based in Sheffield, is celebrating the 45th anniversary of its UKAS accredited infrared temperature calibration laboratory. It was the first UKAS laboratory to be accredited, back in 1970, for the issue of Calibration Certificates for thermal measurements and also the first to be accredited for the issue of certificates that met the requirements ...


    By AMETEK Land

  • Renishaw unveils the new XM-60 multi-axis calibrator

    Renishaw, the world-leading metrology specialist, will exhibit its new XM-60 multi-axis calibrator at IMTS 2016, Chicago, USA and AMB 2016, Stuttgart, Germany. The XM-60 is capable of measuring all six degrees of freedom from a single set-up, in any orientation for linear axes. It offers significant improvement in simplicity and time ...


    By Renishaw plc

  • PerMaSCal – add-on for advanced PTR-TOF mass-scale calibration

    The built-in PerMaSCal unit uses permeation to add a high mass peaks of stable intensity to every spectrum. These signals represent ideal references for accurate, automated TOF mass-scale calibration and other tuning tasks without affecting typical measurement set-ups. ...


    By Ionicon Analytik Ges.m.b.H.

  • Oxygen and CO2 Combo Sensors Makes Calibration Quick and Easy

     One of the largest costs of monitoring gas levels is the ongoing costs of sensor calibration. The CO2Meter.com line of oxygen and oxygen-carbon dioxide combination sensors drastically reduces maintenance costs by simplifying the calibration process. The TR250Z Oxygen Sensor ...


    By CO2 Meter, Inc.

  • Coastal Flow Hosts Iraq's Technical Committee on Metering & Calibration

    Coastal Flow Measurement today announced that it recently hosted a visiting delegation for Iraq's Joint Technical Committee on Metering and Calibration through a program sponsored by the Commercial Law Development Program (CLDP) of the U.S. Department of Commerce and the Bureau of Safety and Environmental Enforcement (BSEE) of the U.S. Department of the Interior. With resurrected and burgeoning ...


    By Marketwire

  • Second Wind To Manufacture 3-Cup Anemometers - Calibrated And Uncalibrated Versions Provide Options To Wind Energy Industry

    Somerville, MA – Customers who conduct wind assessment studies will now have a second source for 3-cup anemometers, as Second Wind announces a new model C3 anemometer, with material and manufacturing improvements over previous models. Benefits of the Model C3 The Model C3 is designed for durability and reliability, with new materials and a manufacturing process that is ...


  • Innovyze Further Expands RDII Analyst Functionality, Setting New Standard for Sanitary and Combined Sewer System Model Calibration

    Innovyze, a leading global innovator of business analytics software and technologies for smart wet infrastructure, today announced the newest release of its RDII Analyst (Rainfall-Derived Inflow and Infiltration) for InfoSWMM and ...


    By Innovyze

  • Innovyze Further Expands RDII Analyst Functionality, Setting New Standard for Sanitary and Combined Sewer System Model Calibration

    Innovyze, a leading global innovator of business analytics software and technologies for smart wet infrastructure, today announced the newest release of its RDII Analyst (Rainfall-Derived Inflow and Infiltration) for InfoSWMM and ...


    By Innovyze

  • The Avogadro Group, an Air Quality and Source Emissions Testing Company, Expands With the Opening of New Office in Phoenix, Arizona

    The Avogadro Group, LLC, www.avogadrogroup.com, an emission testing company headquartered in the San Francisco Bay Area, announces it has opened a Phoenix, Arizona office to serve Southern Nevada, Southern California, ...


    By The Avogadro Group, LLC

  • VOC DETECTION DEVICE

    Neodym Technologies has released the Panterra MOS, 0 - 1000 ppm VOC detection system. The Panterra is a DC powered pager sized device that offers user selectable output features. The sensor head may be extended up to 9 meters for easy placement around the gas source. Also available is a choice of an on-board data logger or a direct PC link that enables a variety of user programmable ...


    By Neodym Technologies Inc.

  • New Ultra Portable Olfactometer for field measurement of odours

    Alpha M.O.S extends its range of odour measurement equipment with a new ultra portable olfactometer. Lightweight and very easy to use, this rugged instrument is used for accurate quantification of odour strength by sensory analysis. This versatile field olfactometer is a valuable instrument for multiples applications: Ad hoc assessment of odour emissions in the field, emission sources ranking, ...


    By Alpha MOS Environment

  • DM-2: Commercial In-Line Dual TDS Monitor

    Install on industrial systems such as car washes, window washing, manufacturing, and food processing. UPGRADED APRIL 2012! The newly upgraded model features digital calibration, low battery indicator, improved accuracy, longer battery life (2 years), longer auto shut-off time (3 min), diagnostic error messaging, and shielded sensor cables. (Upgraded features below are in red.) ...


    By HM Digital, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you