calibration standard News

  • TOMRA Sorting Recycling launches AUTOSORT LASER to increase efficiency

    AUTOSORT LASER TOMRA Sorting Recycling is proud to announce the launch of a sensor-based sorting machine based on laser technology. AUTOSORT LASER enables the separation of glass, ceramics, stones, metals and plastics from household and commercial waste. Its capabilities allow material recovery ...


    By TOMRA Sorting GmbH.

  • Remote-controlled calibration without liquid standards

    The TOC analyser QuickTOCpharma reliably determines the Total Organic Carbon (TOC) in the lowest measuring range up to 2000ppb. Following the requests, the FDA compliant software (CFR 21 Part 11) among other things facilitates data storage and an electronic signature. The software fully controls the analysis system. Moreover, it combines the high demands of pharmaceutical water measurements, in ...


    By LAR Process Analysers AG

  • AMETEK Land Standardises Certificates of Conformity and Adds Calibration Data as Standard

    AMETEK Land has standardised all its Certificates of Conformity for its fixed spot and portable infrared thermometers. ...


    By AMETEK Land

  • Instrument for the preparation of gas standards for mono and/or multipoints calibration: airmoCAL M

    Simple and accessible through its integra­ted software, airmoCAL M can be used to calibrate analytical instruments with standard bottles or permeation tubes. airmoCAL M can automatically prepare and inject gas for all kinds of analytical instruments. The principle of this device is based on mixing, dilution and injection of calibration gases, which can be useful in many applications, such as ...


    By Chromatotec Group

  • Geotech sets the industry standard with ISO 17025 Calibration and five days servicing

    Geotech is a trusted manufacturer and supplier of portable and fixed gas analysers for a wide range of industries.  With our vast network of established international distributors, we are able to supply to and support our customers in over 60 countries worldwide. We offer a total support package for our entire product range from our UK-based Service Centre.  The in-house dedicated and ...


    By Geotech

  • Sierra expands primary standard gas flow calibration systems & online store

    Sierra Instruments, a leading global mass flow meter and controller manufacturer, is pleased to announce the expansion of their primary gas flow calibration systems with the new economical CalTrak® 300 and 350. With increased portability and ease-of-use, now end-users can deliver precision flow calibration and validation, based on a primary standard, ...


    By Sierra Instruments, Inc.

  • XL2 Sound Level Meter Calibration according to IEC standard

    In addition to developing and manufacturing audio, acoustic and vibration measurement systems, NTi Audio also offers a range of calibration and maintenance services for its devices. Besides the calibration of individual system components, a complete Sound Level Meter calibration according to IEC61672-3: 2013 is now available. The XL2 Analyzer and microphone are subjected to a series of acoustic ...


    By NTi Audio AG

  • AMETEK Land Standardises Certificates of Conformity and adds calibration data as standard

    AMETEK Land has standardised all its Certificates of Conformity for its fixed spot and portable infrared thermometers. ...


    By AMETEK Land

  • Portable Ozone Calibrator

    2B Technologies, Inc. has launched its newest innovation, the Model 306 Ozone Calibration Source™ (OCS™). This state-of-the-art instrument is a completely portable (9x21x29 cm) and lightweight (2.6 kg) source of ozone that allows calibration of any ozone monitor regardless of manufacturer. The OCS™ scrubs ozone and water vapor from ambient air and produces any mixing ratio of ozone in the range ...


    By 2B Technologies

  • The new HygroGen calibrator

    The HygroGen is a self-contained transportable humidity and temperature calibrator that enables users and calibration engineers to accurately and rapidly calibrate any type of humidity instrument. The launch of the second generation Airchip3000 based calibrator takes transportable humidity calibration to a new level of performance and ease of use. Rapid and precise Stabilisation of relative ...


    By ROTRONIC AG

  • Gas Dilution Calibration System

    Ecotech is pleased to announce the release of the new GasCal 1100 Gas Dilution Calibration System. The GasCal 1100 is designed using the latest technology to precisely control the dilution of gas standards for calibration of ambient air and source emission monitoring analysers. The calibrator may be connected with up to 4 external gas cylinders for precise dilution of these gas standards with ...


    By Ecotech Pty Ltd

  • Certification of calibration instruments for refrigeration

    Equipment Subject to Adjustment: The equipment that should be subject to periodic calibration are: Digital thermometer 4-way Manifold for R410A and R407c analog or digital Electronic balance; Digital Caliper / Meter AC Refrigerant gas leak detector The calibration process is the operation that the door, by comparison with a standard instrument , ...


    By Eurotec BT Srl

  • Colorimeter chlorine analyser calibration instrumen

    The new P334 Colorimeter instrument provides a simple, reliable solution for calibrating on-line chlorine analysers in compliance with US EPA Method 334.0, published in November 2009. The hand-held Colorimeter includes an easy to follow step-by-step procedure guide; the easiest to use National Institute of Standards and Technology (NIST) traceable standards; and a certificate of calibration from ...


  • New calibrator for temperature flow & pressure

    Quantitech has launched a new hand-held calibrator; the TCR Tecora Flowcal, which has been developed to enable the fast, accurate calibration of high volume air samplers. Traceable to UKAS standards, the Flowcal provides a convenient and highly accurate method with which to check the performance of air samplers such as the ECHO ambient air particulate sampler. The Flowcal is able to operate ...


    By Quantitech Ltd

  • Seatronics Achieve Valeport Calibration Accreditation

    As recently reported in the WorldOil online journal, Seatonics have been awarded calibration accreditation for the extensive range of Valeport Hydrometric & ROV Equipment that it operates. Kevin Edwards, Valeport's Sales & Marketing Manager commented: "Monitoring third party calibration ...


    By Valeport Ltd

  • Dynamic calibration of pressure sensors for engines

    The characterisation of the pressure sensors used to develop the next generation of petrol and diesel engines is crucial to optimising their design, improving efficiency and reducing emissions. The National Physical Laboratory (NPL) has developed shock tube facilities for the calibration of these sensors under the dynamic pressure conditions that they experience in use. Manufacturers of petrol ...

  • Innovyze Further Expands RDII Analyst Functionality, Setting New Standard for Sanitary and Combined Sewer System Model Calibration

    Innovyze, a leading global innovator of business analytics software and technologies for smart wet infrastructure, today announced the newest release of its RDII Analyst (Rainfall-Derived Inflow and Infiltration) for InfoSWMM and ...


    By Innovyze

  • Agilent Technologies establishes capacitance calibration standard for afm-based scanning microwave microscopy

    Agilent Technologies Inc. (NYSE: A) today introduced the first commercially available capacitance calibration standard for an atomic force microscope (AFM). The scientific solutions provider issued calibration specifications for capacitance measurements that allow quantitative assessment of material and device properties via its award-winning Scanning Microwave Microscopy Mode. Researchers from ...


    By Agilent Technologies, Inc.

  • ASTM D5337 - 11 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps

    Most occupational exposure assessment methods require the use of personal sampling pumps to collect air samples at typical workplace sampling rates, with sampling volumes specified by (a) particular procedure(s). The precision and bias of these methods are directly affected by the precision and bias of the pumps used to measure the air ...


    By ASTM International

  • Innovyze Further Expands RDII Analyst Functionality, Setting New Standard for Sanitary and Combined Sewer System Model Calibration

    Innovyze, a leading global innovator of business analytics software and technologies for smart wet infrastructure, today announced the newest release of its RDII Analyst (Rainfall-Derived Inflow and Infiltration) for InfoSWMM and ...


    By Innovyze

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you