cems calibration News

  • MKS` MGS300 CEMS achieves TÜV certification

    MKS Instruments, Inc. (NASDAQ: MKSI), a global provider of technologies that enable advanced processes and improve productivity, has announced TÜV certification for the MGS300 CEMS for stationary emission sources such as incinerators, power plants and cement kilns. A continuous emissions monitoring system, the MGS300 with a core MultiGas™ 2030 FTIR spectrometer provides real-time ...


    By MKS Instruments, Inc.

  • CEMS sales surge for Enviro Technology in 2009

    GDF Suez Energy UK has awarded air quality monitoring specialists, Enviro Technology, a contract to supply five Continuous Emissions Monitoring Systems (CEMS) for its Teesside based Combined Cycle Gas Turbine (CCGT) power station. With a generation capacity of 1875 MW, the power station is Europe’s largest CCGT plant. It produces enough power for approximately 3% of the UK’s needs.Enviro ...

  • Gasmet raises the bar for emissions analysers

    Gasmet Technologies, the Finland based instrumentation manufacturer, has announced that its FTIR-based Continuous Emissions Monitoring System (CEMS) has received approval from TÜV, the international certification body, for the EN 15267-3 standard, which is more recent and more stringent than the existing German Type Approval and QAL1 certificate, EN14181. This means that the Gasmet CEMS is ...


    By Gasmet Technologies Oy

  • Walter Smith and Associates Workshop

    Walter Smith, PE, BCEE, is an expert in Air Pollution Source Sampling. He is considered the "Grandfather of Stack Sampling". Walter Smith has been conducting stack sampling training courses since 1969. Since leaving EPA in 1972, he has conducted and continues to conduct Source Sampling Workshops every year. Source Sampling & CEMS Workshop Schedule ...


    By Apex Instruments, Inc.

  • New emissions monitoring system could change face of pollution at sea

    A new emissions monitoring system being developed by a Norfolk, VA, systems engineering firm will allow vessels worldwide to continuously monitor pollutants and readily report findings to regulatory agencies and inspectors. The patent-pending Continuous Emissions Monitoring System (CEMS), developed by W R Systems, Ltd. (WRSystems), is the first technology integration of its kind. A successful ...


    By WR Systems, Ltd.

  • Frost & Sullivan recognizes Pavilion Technologies for innovation in the air emission control and monitoring market

    Based on its recent analysis of the air emission control market, Frost & Sullivan recognizes Pavilion Technologies, a Rockwell Automation company, with the 2009 North American Frost & Sullivan Industry Innovation & Advancement of the Year Award. Pavilion Technologies leverages the skills of its development team, expert process designs, and cutting-edge patented technology to offer ...


    By Frost & Sullivan

  • Abitibi Bowater chooses Kittiwake procal analyser for biomass plant

    Abitibi Bowater, the eighth largest publicly traded pulp and paper manufacturer in the world, has employed Kittiwake Procal’s continuous emissions monitoring system (CEMS) on its Northern Ontario paper and pulp mill. Secured in conjunction with Kittiwake Procal’s Canadian distributor, Hydroflo, the Kittiwake Procal solution fought off competition from extractive systems. Abitibi ...

  • New Methane Only FID for methane/non-methane measurement

    Signal have developed a new, lost cost flame ionisation detector with a catalyst to measure methane. This can be used for methane measurement or with a conventional FID to provide a non-methane reading. This model utilises a catalyst that is highly specific to methane. It is supplied ready calibrated to optimum balance between allowing methane through and oxidising all higher fractions. ...


    By Signal Group Ltd

  • MCERTS 2011 workshop programme announced

    The organisers of MCERTS 2011 (Telford, 30th and 31st March) have announced the workshop programme to run alongside the event's main conference and exhibition. The workshops will offer a selection of over sixty subjects and will take place in six dedicated rooms located within the exhibition area. It is not necessary to book places at the workshops; registered visitors will simply come and go as ...

  • Promecon installed in more than 60 cement plants worldwide

    With the latest orders of the McON air gas flow measurement to measure the kiln off gas amount at the downcomer duct or outlet gas volume of vertical roller mills the total amount of installed systems reached a number of 100 all over the world. The benefits achieved in plants of leading cement manufacturers now satisfy private oprerated cement plants as well. PZW Wittekind in Germany, Cementos ...

  • EN 15267 Approved Mercury Monitoring System

    The measurement of total gaseous mercury is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintenance, still not giving reliable results. The OPSIS System 400 is different and provides the plants with an accurate mercury analyser, that will operate with a minimum of maintenance. The simple design gives high performance with fast ...


    By Opsis AB

  • MCERTS 2011 workshop programme announced

    The organisers of MCERTS 2011 (Telford, 30th and 31st March) have announced the workshop programme to run alongside the event's main conference and exhibition. The workshops will offer a selection of over sixty subjects and will take place in six dedicated rooms located within the exhibition area. It is not necessary to book places at the workshops; registered visitors will simply come and go as ...

  • FTIR provides monitoring flexibility for Catalyst Environmental

    ENVIRONMENTAL instrumentation specialists Quantitech, recently supplied emissions monitoring company Catalyst Environmental, with a range of instruments that has enabled the company to provide a market-leading range of services across a particularly broad spectrum of applications. In the case study described below, the advantages of multiparameter gas analysers from Quantitech are exemplified as ...


    By Quantitech Ltd

  • Stack emission monitors are ‘future-proof’, says Quantitech

    Leading instrumentation company Quantitech is able to offer customers a revolutionary ‘future-proof’ gas analyser which can protect against any requirements to monitor new parameters in the future. The FTIR Gasmet DX-4000 can monitor up to 300 different compounds of varying concentration and other gases can be added for future applications at little or no extra cost, creating a ‘future-proof’ ...


    By Quantitech Ltd

  • Latest multigas FTIR analysers can be hired

    FTIR gas analysers have become popular in a wide variety of gas detection and monitoring applications because of their ability to measure almost any gas. However, the cost of this equipment can exceed the budgets of those that could benefit from this sophisticated technology, so Quantitech has established a small range of FTIR gas analysers that are available for hire. Typical applications for ...


    By Quantitech Ltd

  • Baseline-Mocon introduces a new high temperature hydrocarbon analyzer

    Baseline-MOCON, Inc., a subsidiary of MOCON (NASDAQ: MOCO), announces the release of their new heated hydrocarbon analyzer for applications that require the sample to stay heated above its dew point.  Configured for single point analysis, the Series 9000 H Heated Hydrocarbon Analyzer has an active range from less than 30 ppb as methane with the high sensitivity version and up to 50% as ...


    By MOCON, Inc. - Baseline

  • Mobile Environment Monitor Gets an Airing at MCERTS

    It’s not just environmental monitoring equipment that will come under scrutiny at this year’s MCERTS Conference – delegates will be able to get an up-to-the-minute read-out on local air pollution levels. Enviro Technology Services plc – a world leader in the supply of advanced environmental air quality monitoring systems – will have an Opsis open-path DOAS system set up outside the main door ...

  • ENVIRO TECHNOLOGY LAUNCHES BS EN 14181 TRAINING COURSE

    In a bid to offer assistance to those looking to understand, and comply with, BS EN 14181 Enviro Technology Services plc – the UK's leading exporter of environmental monitoring instrumentation for air quality and industrial emissions – have announced the date of ...

  • NEW - Opsis Continuous Emissions Monitoring system for power plant operators

    Untitled Document Enviro Technology Services is pleased to announce the launch of the new Opsis CEM system. Designated Powerman 400, this automatic dilution extractive system is designed for continuous ...

  • Monitoring at biomass plants should be `future proof`

    The recent rise in approvals for the construction of renewable energy plants burning biomass has highlighted the need for specified monitoring equipment to be both cost-effective and flexible. Quantitech Director Dominic Duggan explains: “Whilst biomass power represents an important part of the Government’s strategy to produce energy from renewable sources and to reduce waste to landfill, a ...


    By Quantitech Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you