channel gas monitoring News

  • CETCI Launches YES IMS Ten Channel IAQ Monitor

    Critical Environment Technologies Canada Inc. (CETCI) officially launches the YES Intelligent Monitoring System (IMS). YES IMS is a self-contained, indoor air quality (IAQ) monitoring system with ten channel sensor capacity including relative humidity (RH) sensor, temperature sensor, up to seven additional gas sensors, and a remote gas sensor. Options include a fixed wall mount or a portable ...

  • Critical Environment Technologies introduces new Fifteen Channel IAQ Monitor

    Critical Environment Technologies Canada Inc. (CETCI) will launch their new and improved YES Plus LGA at this year’s American Industrial Hygiene Conference and Expo in Denver, Colorado. YES Plus LGA has enhanced, easy to use features that will replace the current YES Plus monitor. This single-solution system is a multi-gas air quality monitoring and information recording instrument that ...

  • Critical Environment Technologies introduces new fifteen channel IAQ monitor

    Critical Environment Technologies Canada Inc. (CETCI) will launch their new and improved YES Plus LGA at this year’s American Industrial Hygiene Conference and Expo in Denver, Colorado. YES Plus LGA has enhanced, easy to use features that will replace the current YES Plus monitor. This single-solution system is a multi-gas air quality monitoring and information recording instrument that ...


  • MCERT’s Approval – GCEM40 Series in-situ gas monitoring

    CODEL are pleased to announce that its latest generation in-situ monitor the GCEM 40 Series has recently obtained MCERT approval. Having recently been certified for TUV we are pleased to see that it has successfully passed the rugged testing of MCERT’s which signifies the accuracy and reliability of its measuring capabilities. Our development, knowledge and practical experience has been ...


    By Codel International Ltd

  • Net safety monitoring flame and gas detectors receive SIL2 qualification

    Net Safety Monitoring is pleased to announce that our entire UV/IR flame detection line has received qualification as SIL2 devices by exida® and that our Phoenix Triple IR Flame Detector and our Millennium II Single and Multi-Channel Gas Detector have attained SIL2 qualification by TÜV SÜD for use in a high demand, or continuous mode of operation. The Net Safety Ultraviolet/Infrared flame ...


  • LumaSense releases software to improve gas-monitoring capabilities within manufacturing plants

    LumaSense Technologies, Inc. (LumaSense) has released software that allows industrial manufacturers to more easily and cost effectively monitor gas emissions by remotely controlling up to 24 multi-gas monitors with a single computer. The LumaSoft™ Gas MultiPoint 7950 remote control software is for use with LumaSense’s INNOVA 1316 multi-gas monitor, and it creates a scalable system ...


  • Landfill Gas to Cash

    Assessing the value of landfill gas and advising on its optimum use is one of the specialist services of landfill experts, Coventry-based, Automatic Flare Systems (AFS).   AFS uses its mobile flare skid for landfill gas pumping trials to analyse the quantity and composition of landfill gas. Mounted on the skid is a Geotech GA3000 static gas analyser. It monitors the untreated ...


    By Geotech

  • WIRELESS ENGINE MONITORING GOES GLOBAL

    DECEMBER 2006, NORCROSS, GEORGIA – OmniMetrix, LLC announces the release of its newest product, the GX128. Demonstrated at the recent PowerGen show in Orlando, Florida, the GX128 is compatible with both the GSM cellular network and the Iridium satellite network. Up until the introduction of the GX128, wireless generator monitoring and control has been limited to the cellular networks in North ...


    By OmniMetrix LLC

  • New 32-channel analog input module interfaces wide variety of sensor signals to ethernet control network

    Acromag continues to extend their EtherStax® line of rugged, high-density Ethernet I/O blocks for distributed I/O and SCADA with the introduction of the ES2153 32-channel analog input model. The ES2153 converts 16 DC current and 16 DC voltage single-ended analog inputs from various transducers and instruments for transmission to an Ethernet-based control network. A DB25 serial port provides an ...


    By Acromag, Inc.

  • New Ethernet analog output units provide 16 channels of 16-bit D/A to drive voltage/current control signals

    Acromag announces high-density, high-resolution analog output modules to perform 16-bit Ethernet-to-voltage or current conversion for precise control of up to16 industrial devices.Acromag has released two new high-performance analog output units for their EtherStax® line of rugged Ethernet I/O. The high-density ES2171 and ES2172 models each provide 16 channels of process current or voltage output ...


    By Acromag, Inc.

  • New Acromag ethernet analog I/O modules pack 16 channels of 16-bit A/D into an inch-wide unit to reduce costs

    New Ethernet Analog I/O modules pack 16 channels of 16-bit A/D into an inch-wide unit to reduce costsAcromag introduces new 16-channel Analog Input modules with Ethernet communication in a space-saving unit to simplify installation and significantly reduce the cost of interfacing sensor signals to remote controllers.Acromag continues to expand its line of BusWorks® Ethernet I/O modules for ...


    By Acromag, Inc.

  • New ethernet I/O units feature a 64-channel 16-bit A/D interface to raise the bar for high-density analog input

    Acromag has released a new analog input module for their EtherStax® series of rugged Ethernet I/O which features extremely high I/O density to further reduce cost per channel and save space. Designed for distributed I/O and SCADA applications, the ES2163 and ES2164 models perform 16-bit A/D conversion on up to 64 single-ended DC current or voltage inputs, respectively, and interface the signals ...


    By Acromag, Inc.

  • Portable biogas monitoring for process control & analysis

    Regular, reliable and accurate monitoring of biogas yield is essential for optimising process performance, treatment and control. There are many solutions and products available using the latest gas measurement techniques however not all are reliable, maintain the required accuracy or assist with minimising potential downtime. Biogas is produced by anaerobic digestion of biodegradable materials, ...


    By Geotech

  • Gas analysis workshop focuses on FTIR versatility

    Gasmet Technologies, the manufacturer of FTIR gas analyzers, organised a meeting in Lisbon, immediately prior to the CEM 2016 conference and exhibition in May, to provide delegates with an insight into the wide variety of applications for which FTIR technology is employed. The measurement of greenhouse gases (GHGs) was a particular focus for the event, with presentations from a number ...


    By Gasmet Technologies Oy

  • PureAire Monitoring Systems Grows their Sales Once Again

    In the past year PureAire Monitoring Systems has grown at the rate of 50%.  PureAire is known for the manufacturing and selling of safety gas monitors. There monitors are used in environments such as laboratories, pharmaceutical industries, medical laboratories, universities, nitrogen manufacturing plants, cold storage warehouses, and other various areas where air conditions can be at risk ...

  • TUV Success for GCEM40 Series Gas Analyser

    CODEL International has recently obtained TUV certification for its multi-channel in-situ gas analyser, the 40 Series. This latest generation gas analyser has been proving it’s self in the far eastern markets where it has achieved much success. With the recent addition of TUV certification CODEL now intend to introduce the 40 Series analyser into the European ...


    By Codel International Ltd

  • Sensidyne release new gas detection resources

    Sensidyne, LP announces the release of their new web site, www.SensidyneGasDetection.com, showcasing their stationary Gas Detection products to users and sales channel partners globally. . The Sensidyne Fixed Systems website includes information on point gas monitors for toxic and combustible gases, and oxygen; open path gas detection for toxic and combustible ...


    By Sensidyne

  • MAX300 LG: Quantitative Laboratory Gas Analyser

    With immediate effect Henniker Scientific Ltd. of Warrington, England announce the release of the MAX300 LG Quantitative Gas Analyser. Quantitative Gas Analysis, performed with precision, accuracy and repeatability, demands an analyser with exceptional stability & repeatability characteristics coupled with an inlet system and analysis methods that can handle routine calibrations and ...


  • Servomex partners with optical gas sensor expert

    A technology partnership between the gas analysis business of Spectris pk (Egham, England), Servomex Group Ltd (Crowborough, England), and Preclsive LLC (Woburn, MA), a developer of optical sensors for on-line gas sensing applications, will give Servomex the opportunity to offer its customers in the hydrocarbon processing market "a genuinely complete gas analysis solution for many downstream ...


    By MKS Instruments, Inc.

  • PKL Technologies Inc. Introduces Open Path CO2 Monitors For GHG and CCS

    PKL Technologies Inc. has introduced Spectra-1 TDLAS (Tuneable Diode Laser Absorption Spectrometer) for open path CO2 remote gas sensing applications. Ideal for large area CO2 monitoring - GHG (Greenhouse Gas) and CCS (Carbon Capture and Storage) applications. Monitoring carbon capture injection sites is difficult without large area CO2 monitoring. With path lengths up to 1 KM, effective large ...


    By PKL Technologies Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you