chemical analysis method News

300 PTR-MS instruments sold – a historic milestone

During the last days of September 2016 we finished the construction of PTR-MS instrument No. 300. It’s a PTR-TOF 1000 that we built for an overseas customer who will use it for analyzing chemical pollutants in industrial areas. Our team took some pride and special care when loading it into its flightcase packaging. Then it was ready for being shipped to one of the many spots all over the ...

Oct. 10, 2016

By Ionicon Analytik Ges.m.b.H.
ASTM E1070 - 11 standard test method for determination of phosphorus in iron ores by phospho-molybdenum-blue spectrophotometry

This test method for the analysis of iron ore concentrates and agglomerates is primarily intended as a referee method to test for compliance with compositional specifications. It is assumed that users of this test method will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly-equipped ...

Oct. 7, 2011

By ASTM International
IONICON celebrates historic milestone: 300 PTR-MS instruments sold

IONICON Analytik, the Austrian based leading manufacturer of real-time trace VOC analyzers, based on the unique PTR-MS technology, has sold its 300th instrument. The analyzer, a PTR-TOF 1000 system, was shipped abroad in September 2016 and will be used for analyzing chemical pollutants in industrial areas. The whole IONICON team with currently more than 30 employees celebrates this achievement. ...

Oct. 7, 2016

By Ionicon Analytik Ges.m.b.H.
ARCADIS scientists co-author 3rd edition of Groundwater Treatment Technology

ARCADIS (EURONEXT: ARCAD), the international consulting and engineering company, today announced that Evan K. Nyer, along with a team of other ARCADIS engineers and scientists, have co-authored the third edition of Groundwater Treatment Technology, which was published in January 2009 by Wiley. The first edition, by Mr. Nyer, originally came out in 1986. Groundwater Treatment Technology has been ...

Jan. 28, 2009

By Arcadis
New, modular system for multi-method analysis on a single platform

Quality control in many industries depends on the routine analysis of a handful of key parameters. Often, determination of these parameters is distributed across several technologies and methods. This goes along with cumbersome aggregation of results and management of data from different sources. With the launch of the new, modular OMNIS platform for comprehensive wet chemical analysis, ...

Jun. 7, 2016

By Metrohm AG
ASTM B950 - 11a standard guide for editorial procedures and form of product specifications for copper and copper alloys

The Form and Style for ASTM Standards manual provides mandatory requirements and recommended practices for the preparation and content of ASTM specifications. In order to promote consistency in the style and content of product specifications under its jurisdiction, Committee B05 recognizes the need to provide a supplementary document pertaining to the ...

Nov. 18, 2011

By ASTM International
The basics of IC explained: monograph «Practical Ion Chromatography»

Over the last decades ion chromatography has become an established method in chemical analysis. «Practical Ion Chromatography» is an introduction to the method with a focus on its practical use in the laboratory. A brief presentation of the theoretical background and an overview of the functional principles are followed by the monograph’s main part, which presents practical ...

Aug. 7, 2012

By Metrohm AG
ASTM B465 - 11 standard specification for copper-iron alloy plate, sheet, strip, and rolled bar

This specification establishes the requirements for plates, sheets, strips, and rolled bars of copper-iron alloys with Copper Alloy UNS Nos. C19200, C19210, C19400, C19500, C19700, and C19720. The material for manufacture shall be a cast bar, cake, or slab and so forth of such purity and soundness as to be suitable for processing by hot working, cold working, and annealing ...

Nov. 18, 2011

By ASTM International
ASTM A751 - 11 standard test methods, practices, and terminology for chemical analysis of steel products

1. Scope 1.1 These test methods, practices, and terminology cover definitions, reference methods, practices, and guides relating to the chemical analysis of steel, stainless steel, and related alloys. It includes both wet chemical and instrumental techniques. 1.2 Directions are provided for handling chemical requirements, product analyses, residual elements, and reference standards, and for the ...

Dec. 2, 2011

By ASTM International
ASTM A510 / A510M - 11 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel

1. Scope 1.1 This specification covers general requirements for carbon and alloy steel wire rods and uncoated coarse round wire in coils or straightened and cut lengths. 1.2 In case of conflict, the requirements in the purchase order, on the drawing, in the individual specification, and in this general specification shall prevail in the sequence named. 1.3 The values stated in either SI units ...

Jan. 30, 2012

By ASTM International
ASTM A436 - 84(2011) standard specification for austenitic gray iron castings

This specification covers austenitic gray iron castings that are used primarily for their resistance to heat, corrosion, and wear. The types of castings covered here are: Type 1, Type 1b, Type 2, Type 2b, Type 3, Type 4, Type 5, and Type 6. The materials shall be manufactured by melting in any furnace that produces castings which includes cupolas, air furnaces, electric furnaces, crucible ...

Sep. 19, 2011

By ASTM International
ASTM B967 / B967M - 11a standard specification for copper-zinc-tin-bismuth alloy rod, bar and wire

1. Scope 1.1 This specification establishes the requirements for copper-zinc-tin-bismuth alloy rod, bar and wire of alloy UNS Nos. C49255, C49260, C49300, C49340, C49350, and C49360 intended for use in plumbing applications and drinking water systems. 1.2 Typically, rod and bar product made to this specification is furnished as straight lengths. Wire ...

Nov. 18, 2011

By ASTM International
ASTM B592 - 11 standard specification for copper-zinc-aluminum-cobalt alloy, copper-zinc-tin-iron alloy plate, sheet, strip, and rolled bar

This specification covers the requirements for plates, sheets, strips, and rolled bars of copper-zinc-aluminum-cobalt (Copper Alloy UNS No. C68800) and copper-zinc-tin-iron (Copper Alloy UNS No. C66300) alloys. The material for manufacture shall be a cast bar, cake, slab or so forth of such purity and soundness as to be suitable for processing by hot working, cold ...

Nov. 18, 2011

By ASTM International
ASTM B67 - 05(2011) standard specification for car and tender journal bearings, lined

This specification covers the establishment of requirements for lined journal bearings for use on locomotive tenders, passenger cars, and freight equipment cars. Before lining, the brass backs shall be bored and thoroughly tinned in accordance with the best standard practice. After lining, the ends of the bearings shall be made smooth by scraping, filing, or machining. The backing metal shall ...

Sep. 26, 2011

By ASTM International
Withdrawn Standard: ASTM D686-93(2007) Standard Test Methods of Qualitative Examination of Mineral Filler and Mineral Coating of Paper (Withdrawn 2011)

These test methods cover two procedures for the qualitative determination and identification of the mineral constituents of filled and coated papers. Formerly under the jurisdiction of Committee D06 on Paper and Paper Products, these test methods were withdrawn in ...

Jan. 20, 2012

By ASTM International
ASTM E396 - 12 Standard Test Methods for Chemical Analysis of Cadmium

These test methods for the chemical analysis of cadmium are primarily intended to test such material for compliance with compositional specifications in Specification B440. It is assumed that all who use these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that ...

Feb. 7, 2012

By ASTM International
ASTM B111 / B111M - 11 standard specification for copper and copper-alloy seamless condenser tubes and ferrule stock

This specification establishes the requirements for seamless tube and ferrule stock of copper and various copper alloys of a specified range of diameters, for use in surface condensers, evaporators, and heat exchangers. The specified coppers and copper alloys are UNS No. C10100, C10200, C10300, C10800, C12000, C12200, C14200, C19200, C23000, C28000, C44300, C44400, C44500, ...

Nov. 18, 2011

By ASTM International
ASTM A554 - 11 standard specification for welded stainless steel mechanical tubing

This guide covers standard specification for welded stainless steel tubing for mechanical applications where appearance, mechanical properties, or corrosion resistance is needed. The tubes shall be made from flat-rolled steel by an automatic welding process without the addition of filler metal. Tubes shall be furnished in one of the following shapes - round, square, rectangular, or special. Heat ...

Nov. 21, 2011

By ASTM International
ASTM B167 - 11 Standard Specification for Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, and Nickel-Iron-Chromium-Tungsten Alloy Seamless Pipe an

Abstract This specification covers nickel-chromium-iron alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696) and nickel-chromium-cobalt molybdenum alloy (UNS N06617) in cold-worked annealed, hot-worked annealed, and hot-finished seamless pipe and tube intended for general corrosion resistant and heat resistant applications. The material shall conform to the required ...

Oct. 27, 2011

By ASTM International
ASTM B159 / B159M - 11 standard specification for phosphor bronze wire

This specification establishes the requirements for round, square, and flat phosphor bronze wires of UNS Alloy Nos. C51000, C52100, and C52400 for general and spring applications. The material for manufacture shall be a casting billet of such purity and soundness as to be suitable for processing by hot working, cold working, and annealing to produce a uniform wrought structure in the ...

Nov. 21, 2011

By ASTM International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you

Sing-In Linkedin Button

or

First name

Last name

Email

Password

Confirm password

Company name

Website

Company description

Minimum 250 characters

Business type

Industry

Location

Market focus