chemical injector system News

  • Slot Injector™ Aeration System for MBR Project

    KLa Systems is in the process of starting up their tenth MBR project using Slot Injector™ Aeration technology.   This last project is for a merchant chemical wastewater treatment plant and has a total oxygen transfer capacity of 7000 lb/d. The Slot Injector system was chosen because of its proven oxygen transfer performance at high MLSS concentrations, flexible, low maintenance ...


    By KLa Systems, Inc.

  • Dosmatic® announces TurboDos®100 and 200 Chemical Injector Series

    With product offering, company demonstrates know-how as “Solutions Provider” to water treatment applicationsDosmatic the leading manufacturer of non-electric, fluid-driven, proportional injectors and pumps, proudly announces its product offerings for 2009 —the TurboDos100 and 200 chemical injectors. These products are patented non-electric injectors, which can inject up to two chemicals ...


  • Slot Injector Aeration System for Membrane Bioreactor (MBR) Plants

    KLa Systems has recently completed our 30th MBR aeration system project using our Slot Injector™aeration technology. These plants are for industrial customers and although predominantly in the food & beverage sector, we have also supplied MBR aeration systems for leachate treatment, ...


    By KLa Systems, Inc.

  • Jet Mixing and Aeration Systems

    Since 2001 KLa Systems has supplied innovative jet mixing, jet aeration and slot injector systems for industries around the world.  Our industrial customers include pharmaceutical processing, pulp/paper, chemical, food processing, textile and landfill treatment operations.  KLa Systems has the most experienced team of professionals in the industry and over the past 30 years we have ...


    By KLa Systems, Inc.

  • Eliminate Hazardous Acids With New Self-Contained Portable pH Control System

    Fortrans introduces the Model 5000SP, a small, portable pH control system that uses low-cost and safe carbon dioxide gas to lower pH. The use and high cost of hazardous acids can be easily eliminated. The 5000SP can be equipped with a peristaltic chemical feed pump to inject alkaline solutions to raise pH, or both the feed pump and the CO2 injector-diffuser may be installed to maintain any pH ...


    By Fortrans, Inc.

  • DiF-JET gas infusion systems (patent pending) broad spectrum device

    Fortrans Inc. announces new patent pending technology to mix gases into water and other media. The Dif-JET System is non-fouling and does not depend on bubble technology to mix gases into water. DiF-JET single and combination Gas Infusion Systems are highly efficient at mixing beneficial gases such as oxygen, carbon dioxide, nitrogen and air into water or other media. DiF-JET inline ...


    By Fortrans, Inc.

  • Agilent Technologies introduces second-generation low thermal-mass system, integrating fast-cycling GC technology with standard data systems

    Agilent Technologies, Inc. (NYSE: A) today introduced the Agilent LTM Series II system for gas chromatography, the second generation of its proprietary low thermal-mass technology that greatly increases sample throughput using faster column heating/cooling cycles. The LTM Series II system can utilize standard Agilent chromatography data system ...


    By Agilent Technologies, Inc.

  • Enviro-Equipment, Inc. Showcases Patented New Oxygreen In Situ Aerobic Bioremediation System at Industry Conference

    Groundwater remediation equipment sales and rental specialists Enviro-Equipment Inc. demonstrated their patented new in situ aerobic bioremediation system “OxyGreen” at the Third Biennial ...


    By Enviro-Equipment, Inc.

  • Johnson Matthey SCR System Sales Exceed 3.4 Gigawatts (GW) of Stationary Engine Power Worldwide

    Johnson Matthey’s Stationary Emissions Control (SEC) group reports that sales of its Selective Catalytic Reduction (SCR) systems, which use their own proprietary urea (or aqueous ammonia) injection control systems, have exceeded 3.4 gigawatts (GW) of stationary engine power for applications worldwide. Johnson Matthey, the leader in emissions control technology for stationary diesel and gas ...

  • Dissolved-air flotation optimised for exhaust air treatment cycles

    EnviroChemie has received German utility model protection for a specific dissolved-air flotation system from the Flomar® series. This particular version is particularly well suited to depleting the solids from highly polluted exhaust air treatment wash cycles, for example from washing towers or electrostatic precipitators. The task here is to reduce the pollutants from the cycles without ...


    By EnviroChemie GmbH

  • ACID RELIEF: Eliminate Acid Build-Up and Avoid Compressor Burnout With ACID-BUSTER

    Technicians can now add the exact amount of acid scavenging solution-without wasting a drop-by using the from Spectronics Corporation. AB-100CS ACID-BUSTER™ Injection Kit is designed to bond with acids without forming chemical by-products and prevents acid build-up in air conditioning and refrigeration systems. The ACID-BUSTER injector is ...


    By Spectronics Corporation

  • UNIQAIR providing Odor Evaluation Service with PURDUE UNIVERSITY Odor Lab

    Special odor sampling procedure with nitrogen dilution has been developed by Uniqair and Purdue University Odor Lab for odor samples with high humidity from fishfeed and Petfood dryers. The nitrogen will preserve the odor and prevent condensation for more accurate odor concentration test results. Unlike VOC testing, the odor lab is utilizing human noses of screened panel members with odor sensing ...


    By Uniqair Technologies Ltd.

  • New Odor Sampling Procedure for high humidity air flow from food or feed dryers/coolers

    Special odour sampling procedure with nitrogen dilution has been developed by Uniqair and Purdue University Odor Lab for odour samples with high humidity from dryers and coolers. The nitrogen will preserve the odor and prevent condensation for more accurate odor concentration test results. Unlike VOC testing, the odour lab is utilizing human noses of screened panel members with odor sensing ...


    By Uniqair Technologies Ltd.

  • CCA Receives Multiple Air Pollution Control Orders in Excess of $6 Million

    MONROE, Conn.- Combustion Components Associates (CCA), a leader in designing, manufacturing, and installing combustion optimization and NOx reduction equipment and technologies, today announced the receipt of air pollution control orders in the U.S. and Europe totaling over $6M. Two orders are for selective non-catalytic reduction (SNCR) applications in the United States. The largest order is at ...


    By CCA Combustion Systems

  • Fortrans Inc. Unveils New Technology to Aerate Wastewater with Dif-Jet™ Gas Infusion Device

    Fortrans Inc. announces new technology for aeration of wastewater. The new Dif-Jet™ gas infusion device is a less expensive alternative to ordinary diffusers, injectors and sparger designs for aeration of wastewater. The reason is simple: the Dif-Jet™ infuser does not make bubbles; instead, it infuses oxygen from air or pure oxygen into the water. Typical infusion rates of 90% to 95% ...


    By Fortrans, Inc.

  • New VP of Sales

    Oxnard, CA (November 1, 2007) – Amiad Filtration Systems, a leading manufacturer of water filtration solutions, has hired Jim Lauria as Vice President of Sales and Marketing for the company’s North American business. Jim Lauria has more than 25 years of experience in liquid/solid separation processes and water treatment.  A chemical engineer by training, he rose to leadership positions in ...

  • HORIBA Scientific Announces New ULTIMA Expert ICP-OES Spectrometer

    HORIBA Scientific (HORIBA), a global leader in ICP systems, is proud to announce the launch at Pittcon of our new ULTIMA Expert ICP-OES Spectrometer. The ULTIMA Expert combines ease of use, a unique plasma torch design, comprehensive tools, highest resolution, lowest detection limits and full wavelength coverage optics for the most challenging applications. ULTIMA Expert is designed with a unique ...


    By HORIBA Europe GmbH

  • Kenics® KMX-V Static Mixer Offers Enhanced Mixing Performance

    For applications involving fluids with extreme viscosity or volume ratios, the most common limiting factor in static mixer design is allowable length. The Kenics® KMX-V Static Mixer, the latest addition to the market-leading Chemineer, Inc. product line, is the superior choice for these applications. It features a design that generates superior mixing per unit length for laminar flow and ...


    By National Oilwell Varco

  • Magnetic Separator Technology Minimizes Compressor Downtime

    Removing Buffer Gas Contamination will reduce Seal FailureMagnetic separator technology is the key to minimizing compressor downtime. Over 80% of centrifugal gas compressors manufactured today are equipped with dry gas seals. Dry gas seals are a non-contact seal with a running gap between the primary and mating seal rings of approximately 3 to 4 microns. Buffer gas is used as a sealing and ...


    By One Eye Industries Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you