chemical monitoring system News

  • European chemical factory selects AppliTek monitoring systems

    AppliTek announces a new order awarded from a soda plant based in Europe. The project will include the design and production of an analyzer system that will monitor the efficiency of the soda production process, as well as the impurities typically associated with this process. All systems and ancillary equipment are designed, built and tested conform the site requirements of the manufacturing ...


    By AppliTek NV

  • Monitors Detect Leaks of Water Disinfection Chemicals

    PureAire Monitoring Systems has a line of economical, self-contained detection systems that alert personnel in water treatment plants to potentially hazardous leaks and releases of several common disinfection gases. Available for chlorine, chlorine dioxide and ozone, STX-PA Gas Monitors respond quickly to low level disinfectant leaks, yet are not permanently damaged by catastrophic or prolonged ...

  • Intelligent pump monitoring for chemical engineering from Colfax Fluid Handling

    Colfax Fluid Handling, a business segment of Colfax Corporation (NYSE: CFX) will demonstrate its commitment to Industry 4.0 with an exhibit of its new intelligent platform for condition and operation monitoring at ACHEMA fair. Known as IN-1000, it will be on display at hall 8.0, booth D63. The platform was developed specifically for Allweiler pumps that are used in operationally-critical and ...


    By Colfax Corporation

  • Intelligent pump monitoring for chemical engineering from Colfax Fluid Handling

    Colfax Fluid Handling, a business segment of Colfax Corporation (NYSE: CFX) will demonstrate its commitment to Industry 4.0 with an exhibit of its new intelligent platform for condition and operation monitoring at ACHEMA fair. Known as IN-1000, it will be on display at hall 8.0, booth D63. The platform was developed specifically for Allweiler pumps that are used in operationally-critical and ...


    By ALLWEILER GmbH

  • Solar cell production: Wet chemical monitoring of texturing processes

    ProcessLab is a robust, easy-to-use analyzer that is installed directly at the process line. All that is required is taking a sample and selecting the parameters to be determined. Crucial parameters of texturing baths such as content of the various acids as well as alkaline components are determined fully autonomously. This means efficient and direct process control right on site, day and night ...


    By Metrohm AG

  • Oceana air monitoring near Ashta Chemicals Chlor-Alkali Plant

    Ashta Chemicals, LLC, in Ashtabula, OH,  one of four remaining mercury-based chlor-alkali plants in the United States, is the source of mercury measured in air surrounding the plant, yet the company claims to be releasing no mercury.  Tests conducted in June 2009 by Oceana scientists directly contradict Ashta Chemicals' reported 'zero mercury emissions,' which appear to be the result of creative ...


    By Oceana

  • Center for medical science chemical kill system

    Practical Applications, Inc. (PAI), a leading environmental company, recently commissioned the chemical/biological decontamination system (chemical kill system) at the Center For Medical Science in Albany, NY. The Practical Applications, Inc. (PAI) Model# 1792 Chemical Kill System is designed to chemically treat waste water generated by the Center for Medical Science (CMS) laboratory prior to ...


    By Practical Applications, Inc.

  • Canada’s chemicals plan

    OTTAWA (GLOBE-Net) – The federal government has announced a plan to manage toxic chemicals in Canada. Over $300 million has been committed over four years to implement new legislation and to reduce health and environmental risks from hazardous substances. Particularly risky substances, many of which are found in everyday household products, may be removed from the marketplace. The environmental ...


    By GLOBE Foundation

  • EN 15267 Approved Mercury Monitoring System

    The measurement of total gaseous mercury is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintenance, still not giving reliable results. The OPSIS System 400 is different and provides the plants with an accurate mercury analyser, that will operate with a minimum of maintenance. The simple design gives high performance with fast ...


    By Opsis AB

  • Particle Measuring Systems Introduces the SLS-1040 Chemical Particle Counter

    BOULDER, Colo., Nov. 21, 2011/PRNewswire-iReach/ -- The new SLS-1040 (Syringe Liquid Sampler) sizes ...

  • Bruker Delivers Major Contract for Chemical and Radiological Detection Systems

    Bruker today announced that it has delivered a major contract comprising Chemical and Radiological Detection Systems to Saab, Sweden. These Bruker detection systems form an integral part of the Saab Automatic Warning and Reporting (AWR) system that has been delivered to a client in Kuwait. The Saab AWR is a proprietary solution for the detection, identification, warning, monitoring and reporting ...


    By Bruker Corporation

  • China in Talks to Join the OECD System for the Mutual Acceptance of Data in Assessment of Chemicals

    It has recently been reported that China is in discussions with the Organization for Economic Cooperation and Development (OECD) to become a provisional adherent to the Mutual Acceptance of Data (MAD) system. This would require China to accept data from safety testing of chemicals from participating countries generated under the MAD conditions and to establish a Good Laboratory Practice (GLP) ...


    By Acta Group

  • Enhanced IntelliPro(R) System Offers BNR and Chemical Addition Capabilities

    Aqua-Aerobic Systems, Inc. has enhanced its proactive, comprehensive process monitoring and controls system by adding biological nutrient removal (BNR), and automatic chemical addition capabilities to the IntelliPro® process management system. The BNR IntelliPro® system provides an essential link between operations, equipment and treatment goals with the added benefit of providing ...


    By Aqua-Aerobic Systems, Inc.

  • The aim of 3iTOX is the development of: a biological and chemical sensor platform for monitoring water quality within low detection bounds (limits).

    By monitoring the quality of surface water during previous years a decision has been made to use more frequently biomonitors based on toxicity. Biomonitors then function as an early warning system for water companies, so they can stop the intake of surface water once the measurement made by the biomonitor has given reason to do so . Because of the potentially large number of substances in surface ...

  • The aim of 3iTOX is the development of: a biological and chemical sensorplatform for monitoring water quality within low detection bounds (limits).

    By monitoring the quality of surface water during previous years a decision has been made to use more frequently biomonitors based on toxicity. Biomonitors then function as an early warning system for water companies, so they can stop the intake of surface water once the measurement made by the biomonitor has given reason to do so . Because of the potentially large number of substances in surface ...

  • EPA air monitoring near Olean, N.Y. School finds no toxic chemicals from plastics facility

    The U.S. Environmental Protection Agency (EPA) monitored the air outside an Olean, New York middle school for three months to determine if a chemical used in plastics manufacturing at a nearby plant was reaching the outdoor air. The Agency did not find the toxic chemical in the air. The air monitoring at the school was part of a national monitoring program to help EPA and state environmental ...

  • System monitors for drinking water contamination on-line and in real time

    INTRODUCING WISE® Water Infrastructure Sensing Equipment On-line, real-time, chemical and biological water contamination detection   Drinking water systems are vulnerable to chemical spills, pollution, natural and man-made disasters, and acts of terrorism.  Until WISE™, there has never been a single, integrated system capable of detecting and reporting biological and chemical ...


    By ECSI International, Inc.

  • New Fully Automatic Clean In Place System For Oil In Water Monitors!

    Most oilfield produced waters and other oily wastewaters have high fouling potential for optical sensors. High Cost Ultrasonic Cleaning systems only address the local optical path and not the entire sample system. The TurnerCIP (Clean In Place) addresses the entire sample system in the same way that CIP’s are used to clean heat exchangers and other oily systems in heavy industry worldwide. ...

  • Battery-powered chlorine monitor

    Athenea is the new chlorine monitoring system for potable water networks from Halma Water Management (HWM). It is an autonomous, battery-powered chlorine analyser that provides continuous monitoring of concentration levels and transmits data automatically via cellular telemetry. This greatly reduces the need for time-consuming on-site ‘spot" testing, and obviously allows for much more ...

  • New Fully Automatic Clean In Place System For Oil In Water Monitors!

    Introducing the new TurnerCIP Fully Automatic Clean In Place System from Turner Designs Hydrocarbon Instruments. Most oilfield produced waters and other oily wastewaters have high fouling potential for optical sensors. High Cost Ultrasonic Cleaning systems only address the local optical path and not the entire sample system. The TurnerCIP (Clean In Place) addresses the entire sample ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you