chipper News

  • Tire Chipper Prototype

    After months of design and fabrication we are now in the final stages of testing for our newest product. Our Sidewall Chipper will create chipped rubber from sidewalls that have had their beads removed in a single pass with no need for steel extraction.  Removal of the bead wire prior to chipping creates a more efficient machine that results in an affordable end product for our customers. ...

  • ChipSafe Now Available on Smaller Chippers

    Morbark, Inc., has expanded the availability of its ChipSafe Operator Safety Shield as an option to the Beever M6R and M8D model brush chippers. The ChipSafe device had previously been available on all new Morbark 12-inch to 18-inch capacity chippers. Field kits to retrofit current model Morbark 6- to 18-inch capacity chippers with the ChipSafe Operator Safety Shield also are available through ...


  • Morbark Debuts Track Chipper, Tree Care Product Updates at TCI Expo

    Morbark, LLC, will debut the Beever M18R Track Tree and Brush Chipper, as well as improvements to its Tree Care Products lines, at the TCI Expo today at the Baltimore Convention Center. Morbark is a leading manufacturer of equipment used in forestry, recycling, tree care, landscaping, sawmill and biomass markets. “We first saw the need for a tracked version of our 18″ capacity ...


  • Morbark Takes Safety to the Next Level

    Recognizing that the tree care industry has inherent risks to personnel, Morbark, Inc., will now offer the ChipSafe Operator Safety Shield as an option on the 12-inch through 18-inch capacity models of its Beever brush chippers. Consisting of plates mounted directly to the sides of the brush chipper’s infeed chute and used in conjunction with special work gloves and ankle straps (or straps ...


  • Morbark introduces new drum for increased chip quality

    After substantial design analysis and in-field testing, Morbark today introduced it’s new Advantage 3 high performance chipping drum, which significantly improves chipquality in large volume wood chipping equipment and reduces recurring wear-part and maintenance costs approximately 70%, to just a fraction of the cost of conventional chipping drums. Most of the significant ...


  • Morbark Hosts Demo Days

    Morbark, Inc., welcomed approximately 300 customers, members of its authorized dealer network, and other guests from around the world for its ninth Demo Days event on August 20 and 21. Morbark’s Demo Days give attendees the opportunity to not only watch the equipment in action, but also meet the people who build and support the equipment as they see firsthand the manufacturing processes ...


  • Easy turning: Chippo `turnable`

    Narrow lanes, restricted visibility, no room to turn - chipping on logging roads can be a driving and working challenge for chipper operators and their logistics crews. These chipping jobs can be much more productive if the crew doesn’t have to spend time backing up and turning the chipper around to reach wood on both sides of the road. The first swivelling chipper in the mobile Chippo ...


    By Komptech GmbH

  • Vermeer equipment is engineered for outstanding performance.

    At Vermeer, we’re never satisfied with status quo. Our engineering and design teams are constantly developing new equipment, or new innovations to improve existing equipment.  From chippers to trenching equipment and balers to horizontal directional drills, Vermeer has the equipment for the job. Vermeer equipment is fully supported by our worldwide dealer network, so you can get ...


    By Vermeer

  • Precision Sharpening Devices, Inc., Now Offers Pneumatic Bevel Buddy, Available Through Morbark Dealer Network

    Precision Sharpening Devices, Inc., has added a new Bevel Buddy™ Chipper Knife Sharpener to its product line. In addition to corded and cordless versions, the Bevel Buddy is now available in a pneumatic-powered option. The Bevel Buddy is available through Morbark® and its worldwide dealer network. Since 1988 Precision Sharpening Devices, Inc., has been manufacturing counter ...


  • Precision Sharpening Devices, Inc., Now Offers Pneumatic Bevel Buddy, Available Through Morbark Dealer Network

    Precision Sharpening Devices, Inc., has added a new Bevel Buddy™ Chipper Knife Sharpener to its product line. In addition to corded and cordless versions, the Bevel Buddy is now available in a pneumatic-powered option. The Bevel Buddy is available through Morbark® and its worldwide dealer network. Since 1988 Precision Sharpening Devices, Inc., has been manufacturing counter ...


  • Morbark demo days focus on markets, opportunities

    Morbark, Inc., opened its sixth Demo Days event with current and potential customers and members of their authorized industrial dealer network in attendance for factory tours, networking opportunities, vendor booths and informational seminars. Tomorrow the event will conclude with demonstrations of equipment for the forestry and recycling markets. Today’s seminars will feature Bill Turley, ...


  • Morbark introduces Biomass Microchipper

    Morbark, Inc., is excited to announce its redesigned 40/36 Whole Tree MicroChipper. This is the latest in design enhancements to make the machine perfect for micro-chip producers. The 40/36 Whole Tree Drum Chipper was first introduced in 2008 as a compact, affordable and productive biomass chipper. The model was improved by the addition of the Advantage 3 high performance chipping drum in 2011, ...


  • Morbark launches quick switch conversion kit

    Morbark, Inc. announced the commercial release of the new Morbark® Quick Switch grinder-to-chipper conversion kit. The Quick Switch, available for Morbark track and rubber-tire horizontal grinder models 3800, 4600, 4600XL and 6600, makes it possible for current grinder owners to produce a marketable chip by simply modifying the hammermill of their horizontal grinder.  The design of the Morbark ...


  • Morbark adds B & G equipment to dealer network

    B & G Equipment, specializing in forestry equipment, parts and service, is now the authorized dealer of Morbark industrial equipment in all of Mississippi and select counties in Tennessee. In business for over 30 years, B & G is based in Philadelphia, Mississippi and has branches in Iuka, Magnolia and Hattiesburg. The company, founded by loggers W. J. Bates & Donald Grantham, Jr., has ...


  • Technology which pays off

    With the design of the AHWI Crawler Tractors AHWI complies with its customers request to use the high quality attachment products in areas where common tractors and carriers face their limit – such as sloppy or wet areas, high risk areas and throughout all climate zones. As a result AHWI manufactures extremely robust carriers which meet the highest principles of ecology, sustainability and ...


  • Morbark introduces compact stand-alone flail

    Morbark, Inc. today introduced the Morbark 5500 Stand-Alone Flail. This portable debarker/delimber removes the bark and foliage from trees when harvesting wood fiber for high quality chips for use in the pulp and paper market. The new flail can be used alone or in tandem with a Morbark Whole Tree Chipper, giving operators flexibility in their operations. Those currently supplying the fuel market ...


  • Morbark annual demo days event focuses on equipment productivity

    Morbark Inc. today demonstrated several new product innovations for the forestry and recycling markets at the company’s annual Demo Days event in Winn, MI. These innovations will help Morbark users streamline their processes and reduce costs. Over 300 people from fifteen countries attended the 2011 Demo Days event that featured factory tours, seminars, vendor booths, networking ...


  • Morbark® Hosts Demo Days, Welcomes Guests from Around the World

    Morbark, Inc., welcomed approximately 300 customers, members of its authorized dealer network, and other guests from around the world for its ninth Demo Days event on August 20 and 21.  Morbark’s Demo Days give attendees the opportunity to not only watch the equipment in action, but also meet the people who build and support the equipment as they see firsthand the ...


  • Morbark Introduces New Flail

    Morbark, LLC, has added a smaller flail option to its product line, the 223 Stand-alone Flail. Easy to transport, the model is efficient and robust for in-woods chipping applications. “Through extensive market research that included design input from customers, we saw the need for a smaller, more affordable option that gives contractors the versatility of being able to produce ...


  • Morbark Makes Maintenance Easy!

    It’s a fact of life that, no matter what equipment you own, there will be routine maintenance that must be completed from time to time. Morbark has listened to the voice of our customers and turned some of the maintenance questions we most frequently hear about our Beever brush chippers into a series of easy-to-follow videos. These “Maintenance Made Easy” videos will ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you