chlorine measurement News

  • Portable Monitor Detects and Measures Chlorine Dioxide

    A portable instrument for the detection and measurement of chlorine dioxide (ClO2) is available from PureAire Monitoring Systems, Inc. A rugged, battery-powered instrument, the Mini-BA Chlorine Dioxide Monitor is ideal for safety monitoring at sites where fumigation and/or sterilization work is being performed. The instrument is also suitable for portable leak detection and temporary monitoring ...

  • Sierra introduces chlorine measurement breakthrough at an economical price

    Sierra Instrument’s new Chlorine-Trak™ 760S Thermal Mass Flow Meter was specifically designed to perform as an accurate and cost-effective mass flow measurement solution for chlorine injection processes found in typical waste-water treatment applications. Given the corrosive nature of chlorine gas (particularly in the presence of moisture), finding an economical measurement solution ...


    By Sierra Instruments, Inc.

  • GF Piping Systems` New Signet 4630 Free-Chlorine Analyzer Provides Turn-Key, Accurate Chlorine Water Measurement

    GF Piping Systems has introduced the Signet 4630 Free-Chlorine Analyzer System to augment their growing line of measurement and control products for potable water.  Designed with amperometric sensing technology, the new analyzer incorporates a clear flow cell, flow regulator, ...


    By GF Piping Systems

  • Chlorine in Coal and Coke

    A proposed new ASTM International standard will allow for a rapid and highly repeatable determination of chlorine in coal and coke through X-ray fluorescence spectroscopy. WK34943, Test Method for Chlorine in Coal and Coke by XRF, is being developed by Subcommittee D05.29 on Major Elements in Ash and Trace Elements of Coal, which is part of ...


    By ASTM International

  • Battery-powered chlorine monitor

    Athenea is the new chlorine monitoring system for potable water networks from Halma Water Management (HWM). It is an autonomous, battery-powered chlorine analyser that provides continuous monitoring of concentration levels and transmits data automatically via cellular telemetry. This greatly reduces the need for time-consuming on-site ‘spot" testing, and obviously allows for much more ...

  • Colorimeter chlorine analyser calibration instrumen

    The new P334 Colorimeter instrument provides a simple, reliable solution for calibrating on-line chlorine analysers in compliance with US EPA Method 334.0, published in November 2009. The hand-held Colorimeter includes an easy to follow step-by-step procedure guide; the easiest to use National Institute of Standards and Technology (NIST) traceable standards; and a certificate of calibration from ...

  • Water shifts to on site chlorine generation

    On-site generation offers an economical solution to safety issues surrounding chlorine transportation. Innovative chemical engineering could help resolve a major disagreement between the water treatment industry and environmentalists over chlorine. Chlorine has a stellar record in the disinfection of water, but in recent years its reputation has suffered a steady assault from activists opposed to ...


    By MIOX Corporation

  • ATi Introduces New FOC Process Application Note about Reagent-Free Residual Chlorine Measurement

    Analytical Technology Inc. (ATi) introduces a new free of charge application note entitled “Regent free Residual Chlorine Measurement in process with variable and/or high pH.  The new application note discusses how ATi’s Q45H62 monitoring system measures free chlorine residuals without the need for chemical buffering traditionally associated with such measurements.  Acetate and ...


  • Analytical Technology’s A15/79 Monitor Achieves Precise and Reliable Measurements of Chlorine in Water

    (5 November 2007) Analytical Technology Inc, (ATi) announces that its A15/79 Total Chlorine Monitor is capable of accurately measuring residual chlorine even in wastewater using a unique non contact sensing technique that provides significant advantages over traditional systems. Total chlorine measurements are essential in order to ensure safe levels of chlorine in water effluents, as excessive ...

  • Chlorine monitoring in water with high Mn/Fe salts

    In 2012, Intellitect Water launched the new V2 Intellisonde (IV2) in-pipe water quality monitor, which offered two new advantages; retained calibration data and improved chlorine measurement. Since that time, IV2 sondes have been successfully installed around the world offering users easier access to water quality data. However, now that the IV2 sondes have been in operation for nearly a year, ...


    By Intellitect Water Ltd

  • New Digital Chlorine Dioxide Testing From Palintest

    Palintest Ltd, the leading water analysis technology company, has developed a completely new method for testing Chlorine Dioxide levels in water. The ChlordioXense provides accurate testing without relying on subjective analysis for results. The instrument eliminates the potential for user error giving precise, consistent results whatever the operator’s level of experience. Developed from the ...

  • Complex packaged dosing plant for chlorine production

    To meet stringent health and safety requirements for steam raising at an existing chlorine gas producing plant, Gee & Company has developed one of the most complex chemical dosing systems of its type, incorporating unusually high engineering standards. Housed within a large self-contained kiosk, the packaged dosing system was factory- built and tested so as to minimise the level of site ...

  • ProMinent at IFAT 2014: Safe and efficient chlorine dioxide generation

    The system concept for the innovative generation and metering of chlorine dioxide is being presented at IFAT by ProMinent in the form of the chlorine dioxide system Bello Zon CDVc. The higher operating safety and improved purity of the generated chlorine dioxide are the result of a solution- and performance-focused development that can be seen on the Heidelberg-based manufacturer's Stand 431 in ...

  • Analytical Technology Introduces its Integrating Recording Chlorine Transmitter

    Analytical Technology has introduced its B20 Recording Chlorine Transmitter for residual chlorine monitoring where both measurement and circular chart recordings are required. The system combines both a free or chloramine analyser inside a circular chart recorder to provide either 24 hour or seven day recording of chlorine residuals. The transmitter can be used in a wide range of applications, ...


  • Watson-Marlow OEM pumps help meet rising demand for chlorine monitors

    A specialist manufacturer of water quality measurement and monitoring systems is using peristaltic pump technology from Watson-Marlow Pumps Group for use in chlorine monitoring equipment after similar pumps were found less reliable. With customers that include water, industrial and pharmaceutical companies, Analytical Technology Inc (ATI) designs and manufactures its products in Pennsylvania, ...

  • Breakthrough DPD chlorine testing offered by Industrial Test Systems

    Industrial Test Systems, Inc., is proud to announce its latest revolutionary breakthrough the DPD-1 eXactStrip® for Free Chlorine. DPD-1 offers users a new, more convenient, delivery system for DPD. With DPD-1 eXactStrip® for Free Chlorine there are no more tablets to crush, powders to spill, glass ampoule to break, or dispensers that release irritating dust. All required reagents are precisely ...

  • Efficient water disinfection with Oxiperm Pro chlorine dioxide generators

    In drinking or process water, there are often unwanted micro organisms such as pathogenic germs or disruptive factors for industrial processes. In the food and beverage industry in particular, complete production charges could be affected. The formation of biofilm is an additional problem. Biofilm is a slimy layer which forms on the inside of water pipes or heat exchangers. Many micro organisms ...


  • Rigaku NEX CG EDXRF application note: chlorine & RoHS elements in polyethylene

    Applied Rigaku Technologies, Inc. is pleased to publish a new application report for the advanced Rigaku NEX CG EDXRF with Cartesian Geometry. This Application Note #1033 shows performance for the elemental analysis of Cl and elements regulated by RoHS in plastics. Analysis is shown for polyethylene. Empirical calibration summary and detection limits are shown and instrument repeatability is ...

  • Water-testing Device Measures Up

    Arkansas reporter John Magsam wrote the following article regarding Beaver Water District and their use of the ChlordioX Plus instrument, which recently gained EPA approval for the determination of chlorine dioxide and chlorite in public water supplies. Water-testing Device Measures Up EPA approves system that got a trial run in Arkansas By John Magsam A new water-testing device that ...

  • Safe and efficient - new chlorine dioxide system Legio Zon® CDLb

    The new system concept will ensure the innovative generation and metering of chlorine dioxide, resulting in minimal use of chemicals and improved stability of the chlorine dioxide solution produced. Its intrinsically safe process method, including the sealed transport of gas, guarantees outstanding operational safety.    The chlorine dioxide system CDLb uses the chlorite/acid ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you