combustible gas transmitter News

  • EX-6100 Sensor/Transmitter for Combustible Gases

    The EX-6100, 24 VDC, Combustible Gas Sensor/Transmitter utilizes a matched pair of catalytic elements. The sensor can be calibrated for 0-100% LEL hydrogen, methane, propane, butane or other combustible hydrocarbons. The EX-6100 is standard with an internal alarm relay PC board, two inlet/outlet parts, and plug-in sensor. Other features include a liquid crystal display, 4-20 mA output and ...


    By ENMET, LLC

  • CETCI Receives BTL Certification for PET BACnet® Gas Detection Transmitter

    Critical Environment Technologies Canada Inc. (CETCI) is proud to receive the BACnet® Testing Laboratories (BTL) certification for PET BACnet® gas detection transmitter on October 15, 2010. BTL was established by BACnet® International to test product functionalities based on the BACnet® standards. BTL’s mandatory requirements must be met in ...

  • ABUTEC 200: A State-of-the-Art Combustion Solution

    The ABUTEC 200 is the most versatile unit of the three standard-sized unit offerings from ABUTEC. These units are sized for the flow and British Thermal Unit (BTU) value of the gas the unit will be handling. The ABUTEC 200, developed, with the largest exploration and production facilities in mind, is a reliable unit for combusting even the largest amounts of vapors. Many features come standard on ...


    By ABUTEC LLC

  • CETCI Manufactures Economical & Smart BACnet transmitters

    BST BACnet, digital gas detection transmitters are rugged, user-friendly, configurable gas detectors that are available with a variety of sensor types to detect a wide range of gases, including solid state, electrochemical, catalytic, and PID sensor technologies. The sensors utilized in this device are accurate enough to measure to Occupational Health & Safety hazardous levels for toxic and ...

  • PET BACnet® Transmitter Is More Than You Bargained For

    Since Critical Environment Technologies Canada Inc. (CETCI) launched the Parkade Emissions Transmitter (PET) in September 2010, interests have spiked. PET is a highly competitive and versatile BACnet® transmitter that is cost effective and is available in five configuration models. PET BACnet® transmitter is BTL certified, communicates via BACnet® ...

  • CETCI to Introduce Low Power Transmitter at AHR Expo 2012

    Critical Environment Technologies Canada Inc. (CETCI) will introduce their new Low Power Transmitter (LPT) at the International Air Conditioning, Heating, and Refrigeration (AHR) Expo in Chicago, Illinois from January 23-25, 2012. LPT is an economical “Low Power Transmitter” that will only be available with a carbon monoxide (CO) or nitrogen dioxide (NO2) sensor, ideal for vehicle ...

  • CETCI Launches Phase One of the Low Power Transmitter (LPT)

    Critical Environment Technologies Canada Inc. (CETCI) is proud to announce phase one launch of the Low Power Transmitter (LPT) available in single sensor carbon monoxide (CO) or nitrogen dioxide (NO2) electrochemical sensor. The LPT features 3-in-1 wiring: two-wire “loop”, three-wire VDC or four-wire VAC power, 4 – 20 mA linear output signal, automatic thermal resetting fuse, ...

  • Quasar 900 Open Path Gas Detector

    The SafEye Quasar 900 Open Path Gas Detector is a high performance, high reliability gas detector, providing continuous monitoring for combustible hydrocarbon gases such as methane, propane, ethylene, butane, etc. Encased in a rugged, stainless steel, ATEX and IECEx approved housing, the Quasar 900 is able to detect at distances of up to 660ft (200m) in the harshest of environments. ...


    By Spectrex Inc

  • GSM-60 Gas Sampling Monitor with Internal Pump and Sensors

    The GSM-60 is a microprocessor-based gas monitor especially designed for use in industrial process, aerospace, pharmaceutical and semiconductor applications. The system incorporates an internal sample draw pump and gas sensors. The instrument can be custom configured with both internal and external sensors for monitoring a combination of gas parameters including VOCs, dew point, oxygen and CO, or ...


    By ENMET, LLC

  • CETCI has the perfect gas detector system for your application!

    Critical Environment Technologies Canada Inc. (CETCI) is thrilled to introduce our new line of gas detection products that offer more features, greater functionality and superior value. The QCC Quad Channel Controller, is perfect for small to medium sized gas detection applications such as monitoring CO, NO2 and combustible gases in car parks; refrigerants, ...

  • Net safety monitoring flame and gas detectors receive SIL2 qualification

    Net Safety Monitoring is pleased to announce that our entire UV/IR flame detection line has received qualification as SIL2 devices by exida® and that our Phoenix Triple IR Flame Detector and our Millennium II Single and Multi-Channel Gas Detector have attained SIL2 qualification by TÜV SÜD for use in a high demand, or continuous mode of operation. The Net Safety Ultraviolet/Infrared flame ...


  • General Monitors Gas & Flame Detectors Receive DNV-GL and MED Marine Approvals

    General Monitors announces that its most popular advanced gas and flame detectors now meet the Marine Equipment Directive (MED) for Det Norske Veritas’ (DNV) Offshore Standards as well as DNV·GL Type Approval. MED is the European Directive requiring that gas and flame detectors installed in marine environments be tested to specific standards and inscribed with the “wheel ...


    By General Monitors

  • Senscient ELDS(TM) Version 1.2 Open Path Gas Detectors Are First With Wireless 2.4 GHz Access and Data Communications

    An industry first, Senscient's new ELDS Version 1.2 Open Path Gas Detectors (OPGDs) feature Integrated 2.4 GHz Wireless Communications between the ELDS Transmitters/Receivers and Senscient Install & Commissioning tools. No other OPGD is as easy to install, with 2.4 GHz wireless alignment & access to event logs, self check results, and system diagnostics. This eliminates hard-wired Class I ...


    By Senscient Inc

  • New Calibration Extending Firmware (CEF) Added Feature

    Critical Environment Technologies Canada Inc. (CETCI) announces latest added feature, Calibration Extending Firmware (CEF), to all future developed products. CETCI introduced the CEF to the PET BACnet® transmitter in 2010. The new sensor CEF takes into account the aging of the sensors so that less frequent calibrations are acceptable in non-critical applications. With great success and ...

  • Air and water instrumentation market to exceed $14.1 billion this year

    Expenditures for portable, laboratory and continuous measuring instruments for air and water will exceed $14.1 billion this year. This is the forecast made by McIlvaine in its Air and Water Monitoring publications. (www.mcilvainecompany.com) The definition of the market is based on the McIlvaine concept of “decisive classification” rather than scientific ...


    By The McIlvaine Company

  • Cemtrex Signs Representative Agreement with International Sensor Technology

    Cemtrex Inc. (OTC: CTEI), a leader in emissions monitoring systems, today announced the signing of a representative agreement with International Sensor Technologies, based in Irvine, CA. This agreement expands Cemtrex's already strong experience in gas analysis systems with a complementary set of Gas detection sensors and products from International Sensor Technologies. The agreement was signed ...

  • Critical Environment Technologies introduces new fifteen channel IAQ monitor

    Critical Environment Technologies Canada Inc. (CETCI) will launch their new and improved YES Plus LGA at this year’s American Industrial Hygiene Conference and Expo in Denver, Colorado. YES Plus LGA has enhanced, easy to use features that will replace the current YES Plus monitor. This single-solution system is a multi-gas air quality monitoring and information recording instrument that ...


  • CETCI Enhances Top Selling YESAIR Indoor Air Quality Monitor

    Critical Environment Technologies Canada Inc. (CETCI) has continued to enhance its top selling YESAIR indoor air quality monitor by introducing a new relative humidity (RH) and temperature sensor shroud. YESAIR is a CE certified air quality monitor with an eight channel sensor capacity. It contains a fixed temperature and RH sensor and can handle up to five additional internal plug & play ...

  • CETCI Coats All Non-Metallic Enclosures to Eliminate EMI & RFI

    Critical Environment Technologies Canada Inc. (CETCI) will professionally coat the interior of all non-metallic system enclosures with a protective electromagnetic interference (EMI) coating for all their gas detection monitors and selective YES branded air quality instruments. This coating is designed to reduce or eliminate potential EMI and radio frequency interference (RFI). For more than five ...

  • CETCI Expands Manufacturing Capabilities & Increases Productivity

    Critical Environment Technologies Canada Inc. (CETCI) has doubled its manufacturing and office space to approximately 11,000 square feet as of December 1, 2010. The service department and production department for portable IAQ instruments have moved into the new additional space. Meanwhile, production department for fixed gas detectors has utilized the space vacated by the portables and service ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you